Jump to content
SAU Community

Recommended Posts

Here's the GTR on the weekend wearing some different boots (Enkie RP02 and RE55s) and showing off the CSC brakes.

LOOKS noice mate.

although it is a little naked now without the advertising :lol:

And where was your lazy backside lastnight mate, i made it to Marks so why didn't you ;)

UPDATE

All parts have finally turned up and ready for the HUGE weekend ahead of me to get the car back on the road.

SOLD PFC to Mark for his race car but bought a few little GFB's for the little ol Rb20 thumper :)

Pics will come and also progress on build

Cheers GMB

sav man - Yeah I am, but there will alway be another GTR sooner rather than latter. May just a as a nice roadie instead.

grandmasterb - I was finishing the putting up the $3000 fence at the new house. How can powercoated tube be so expensive?

I like it without the stickers, looks a bit more stealthy!

hey guys, im pretty new to the forum. i own a R33 series 1. got it freshly imported in november last year. it's currently maroon, but im just waiting on the Trial body kit to arive so i can do a full respray on it. im going for a bayside blue, maybe a bit darker. the car was stock when i bought it, and so far i have put on 17" mags, 3" mandral bent zorst, front mount, k and n filter, turbo smart boost controller, autometer bost guage and volt guage, Rockford Fosgate sound system, playstation 2, 7" screen. currently having boost problems, and when it's under boost the car runs really jerky and crap.

lol sounds bad dude but i dont know much about cars so u migth b lucky :rolleyes:

but still sounds like a nice car where bouts u situated have i seen it a lil bit out of ridgley or probably some one else :) lol even though thats brown...

sav man - Yeah I am, but there will alway be another GTR sooner rather than latter. May just a as a nice roadie instead.

grandmasterb - I was finishing the putting up the $3000 fence at the new house. How can powercoated tube be so expensive?

I like it without the stickers, looks a bit more stealthy!

Yeah its looks good.

SO when you going to get that 32 from marks and get it on the track :rolleyes:

hey guys, im pretty new to the forum. i own a R33 series 1. got it freshly imported in november last year. it's currently maroon, but im just waiting on the Trial body kit to arive so i can do a full respray on it. im going for a bayside blue, maybe a bit darker. the car was stock when i bought it, and so far i have put on 17" mags, 3" mandral bent zorst, front mount, k and n filter, turbo smart boost controller, autometer bost guage and volt guage, Rockford Fosgate sound system, playstation 2, 7" screen. currently having boost problems, and when it's under boost the car runs really jerky and crap.

Could be any number of problems mate.

Start with the most common problems:

dirty AFM

fouled plug

crook coil/s or ignitor

boost leak (if its only under load)

blocked fuel pump or faulty fuel pump.

Start by trying to elimante a few of them first.

Im sure that someone in your area can give you a hand with it if you get stuck at all :)

GOOD LUCK

GMB

I got a nice package in the mail today :(

front_small.jpg

back_small.jpg

my new old HKS GT2530's. One needs a new core, so i'm taking it in to get looked at on Monday.

:lol: mate its old, i have read it already!!!

hey guys, im pretty new to the forum. i own a R33 series 1. got it freshly imported in november last year. it's currently maroon, but im just waiting on the Trial body kit to arive so i can do a full respray on it. im going for a bayside blue, maybe a bit darker. the car was stock when i bought it, and so far i have put on 17" mags, 3" mandral bent zorst, front mount, k and n filter, turbo smart boost controller, autometer bost guage and volt guage, Rockford Fosgate sound system, playstation 2, 7" screen. currently having boost problems, and when it's under boost the car runs really jerky and crap.

How much boost are you trying to run, if everything else is ok, you may be hitting the boost limitter. Don't try and run anymore than 12 psi with a "stock everything else" ( turbo, ecu, etc ). If you wan't more (everyone wan'ts more) you'll need to upgrade your ecu, then your turbo, then your fuel systm.... etc and so forth........... or you could just run gas :-)

  • 2 weeks later...

Back in black! My Skyline is back on the road again! you couldnt wipe the grin from my face with a wild badger :P what a mission, 4 12 hr days, tell you what - I wont be doing that again in a hurry...

Still have a few teething troubles, hicas light is on (I think I know what that might be - search button you're my hero) and I have one hose which is not quite on properly (water line down the back of the engine - need a reaaaaly long set of needle nose pliers)

I am just taking it easy on the replacement engine for a few days, its hard, I saw a little boost last night on my lap around the block, the car is going "lets go" im crying "dont tempt me!"

Hope to see you all on the blacktop sometime soon! Incidently do you guys know of an good roads near hobart (other than over mt wellington and grasstree) - all while obaying speed limits and being safe of course.

Sump for ANIMAL has been ordered and hopefully make it from Japan in time for the April weekend.

Blue Beast is up 4 SALE and so is the race car.

Looking for a job at the moment so if anyone know's of something going that may suit me or just pays the big bucks then it would be much appreciated if you could let me know :(

GMB

i found out what the problem was with my engine, the circuits for the throttle posistion sensor in the ecu was stuffed, so im just saving up for a PFC.

:( DOH...

bet that took a little while to find, would of been one of the last things i would of checked as well from your first discription.

I maybe able to help you out with a price on PFC so PM and let me know!!!

GMB

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...