Jump to content
SAU Community

Recommended Posts

That requires money and i owe more than i have let alone coming up with enough to rebuild it.

Im going to strip as much off/out of the shit heap as i can and flog it all along with the rolling shell!!!

Then once thats done im out of cars for a while, IM OVER THEM and all there PROBLEMS

cars bikes houses women, theyre all the same :rofl: . can i call dibs on your diff master b?.... and brakes and turbo and :rofl::rofl:

Got the new exhaust gaskets in and new studs, DAM that job suz and then some. LOL. i got cuts all over my knuckles. No more leaks, nice sound.

Also ported theturbo wastgate, much better boost controll.

The car still a dog for cold starts. Not a head gasket, as the coolant we drained was clean azzzzzz. Hunt continues.

TOFF you can have the manifold, it's preaty straight. Only thing was 3 of teh cover bolts snapped.

Finally got my 33 back on the road friday night.it's been a long journey. many thanks to Wogboy for helping to find the problem. now to put in the PFC and get it tuned.

Pfc???? who sold you that???? same silly prick who just tried to buy another and got ripped!!!!!!!!!!!!!!! LOL (not funny)

sorry. Very special thanks must go to Madaz R33 for supplying the PFC and hand controller at an unbeatable price.

thats allright (no one to blame but me` shouldnt be so trusting of strangers ), this happens sometimes when you play the game... but the pfc couldnt of made its way into a better set of hands! no worries champ!!!

All these people wanting Power FC tunes.

GTGARAGE.gif

All you ever need ;). Have the latest version of the Apexi Dataloggit software so no tuning off the hand controller and is all obviously in real time ;). You want proof of how good Nick's work is? In regards to tuning, my car 261rwkw SR with a stock motor that has done 3 drift days with this tune on 1.3bar (as well as had been running ~200rwkw for 18 months before the retune) and a mates CA which makes 232rwkw, which Nick also built the motor for from the ground up :(.

The thing that sets Nick apart apart from his tuning ability is the fact he will go through and explain every detail of the tune with you as he is doing it and will ask how you want the car tuned. If you're not happy with something it can be rectified in about 30 seconds via the software. He is even retuning cars that have been tuned down here already by local businesses.

Can do guard flaring anytime anyday in about 3 weeks time too :mellow:. Again i can show previous work to demonstrate the quality of my work :(.

Hope this helps with people's decisions :).

All these people wanting Power FC tunes.

GTGARAGE.gif

All you ever need ;). Have the latest version of the Apexi Dataloggit software so no tuning off the hand controller and is all obviously in real time ;). You want proof of how good Nick's work is? In regards to tuning, my car 261rwkw SR with a stock motor that has done 3 drift days with this tune on 1.3bar (as well as had been running ~200rwkw for 18 months before the retune) and a mates CA which makes 232rwkw, which Nick also built the motor for from the ground up :(.

The thing that sets Nick apart apart from his tuning ability is the fact he will go through and explain every detail of the tune with you as he is doing it and will ask how you want the car tuned. If you're not happy with something it can be rectified in about 30 seconds via the software. He is even retuning cars that have been tuned down here already by local businesses.

Can do guard flaring anytime anyday in about 3 weeks time too :mellow:. Again i can show previous work to demonstrate the quality of my work :(.

Hope this helps with people's decisions :).

About time we have someone we can trust. Have herd good things about Nick.

Pretty happy with sams tune at the moment, but may be in for some fine tuning soon.

I will be in contact Ben

cheers

leigh

Edited by woolls
About time we have someone we can trust. Have herd good things about Nick.

Pretty happy with sams tune at the moment, but may be in for some fine tuning soon.

I will be in contact Ben

cheers

leigh

You will only hear good things about Nick, you will not find one single person in this state who has anything bad to say about his work i can confidently say that 100%.

My car as well as his 180sx will be at Baskerville on March 31 for the state series promoting the business a little bit too :(. Never hurts to get a few stickers on the car at a major event like this to further raise awareness......

Look forward to hearing from you Leigh :mellow:.

You will only hear good things about Nick, you will not find one single person in this state who has anything bad to say about his work i can confidently say that 100%.

My car as well as his 180sx will be at Baskerville on March 31 for the state series promoting the business a little bit too :(. Never hurts to get a few stickers on the car at a major event like this to further raise awareness......

Look forward to hearing from you Leigh :mellow:.

I will come over an say gaday on the 31st,

wish I was out there having another go, But i need heaps more practice and you guys like holding the practice days when I am working.

Edited by woolls

Ok.

My car seems to be almost free boosting without loading up the engine (mostly noticeable in 3rd, 4th and 5th gears)

There’s no kick to the engine, but there’s a lot of boost.

When revving the engine and looking under the bonnet It sounds like a slight exhaust leak from maybe the exhaust manifold..

To me that may be the reason the car is not taking off the way it should, does that sound right?

To give you an idea…..going up a hill at 80kph in 4th gear, I can floor it, hit a bar of boost (not good) and the car will actually DECELERATE.

Any idea’s or could I be on the money with an exhaust leak? Turbo is doing it’s job perfectly, the engine doesn’t seem to want to do it’s job tho.

Any help much appreciated

YOU COULD HAVE A LEAK SOMWHERE IN THE PIPING?

opps sorry, autocad autocaps. LOL.

I just replace my manifold gaskets and studs, the car is much better. What managment are you running. Is it possible that the AFm is runningout of scope?

HERE IS MY QUESTION TO YOU BUFFSSS.

Did my manifold sytds and so forth

ALSO found with the new coolant, the car is running cooler, and there is more white froth on top of the water, but it's froth, like soap suds, and it disapears quickly. It only appeares when the car is very hot. If i take the radiator cap off, you can see the froth arround the cap, but if you turn the engine off it disapeares quickly.

DOES radiator coolant froth a bit. My dad ensures me it's not a head gasket. I have had no coolant loos or anything. LOL. Paranoid again.

Forgot to add, the car hasn't used any watter or anything, the exhaust doesn't smell sweet or anything. The car doesn't buble when hot or cold or anything like that. This only happens when the car is hot, above 80 degC. if you open the radiator cap, you can see fine bubles going past in the water, but the bubles are not air, as the radiator overflow, does not buble and the system does not get pressurised with air or anything.

Is it possible that there is some air still somwhere in the system?

I KNOW i know, stop asking so many questions.

HELP PLEASE SOMONE ANWSER ME.

and how would i get in contact with nic. could you see if he can give me a quote on the following .

R33 gts-t RB25DET

greddy plenum, front mount, a/m regulator, bosch 040, split dump pipe and 3in cat back exhaust.

i have a apexi pfc thats already got a map on it if that helps.

HAYY ME AGAIN. Another thing

I noticed today, well it has always done this ASAK, there is a TSSIICKK TSSIICKK sound coming from the back of the engine when it is turned off, when HOT. It does this for propably 1 minute or so. It is somewhere at the back, but no idea where.

If you take the cap off while this is happening, the water moves up and down to the sound, and eventually comes over the top, then stops. No bubles in the watter comming through, just water, there was no more froth this afternoon.

I presume this is bad????

ALSO, the water in the reservour tank, when hot mine is over the full line, and cold it is below it, it is normall for the fluid to expand into the overflow bottle?

HELP Correct?

and how would i get in contact with nic. could you see if he can give me a quote on the following .

R33 gts-t RB25DET

greddy plenum, front mount, a/m regulator, bosch 040, split dump pipe and 3in cat back exhaust.

i have a apexi pfc thats already got a map on it if that helps.

i think Nick and Bens phone numbers are in Bens post (tas_180)

GT Garage

Edited by woolls
All these people wanting Power FC tunes.

GTGARAGE.gif

All you ever need ;). Have the latest version of the Apexi Dataloggit software so no tuning off the hand controller and is all obviously in real time ;). You want proof of how good Nick's work is? In regards to tuning, my car 261rwkw SR with a stock motor that has done 3 drift days with this tune on 1.3bar (as well as had been running ~200rwkw for 18 months before the retune) and a mates CA which makes 232rwkw, which Nick also built the motor for from the ground up :wave:.

The thing that sets Nick apart apart from his tuning ability is the fact he will go through and explain every detail of the tune with you as he is doing it and will ask how you want the car tuned. If you're not happy with something it can be rectified in about 30 seconds via the software. He is even retuning cars that have been tuned down here already by local businesses.

Can do guard flaring anytime anyday in about 3 weeks time too :pirate:. Again i can show previous work to demonstrate the quality of my work :D.

Hope this helps with people's decisions :).

Go easy on the advertising there please dude.

Fair enough they might do good work, but thats pretty blatant advertising going to the extent of linking logos and what not.

If this guy wants to get work off people, tell him to become a trader ;)

Then everyone is happy from all sides :sorcerer:

1) He makes money from promotion/sales, and exposure and a good reputation with members, and then word of mouth follows

2) The site (possibly) might stay in Australia: http://www.skylinesaustralia.com/forums/in...howtopic=160504

So nothing bad can come from it ;)

Gotta give back what you take sometimes

Cheers

Ok.

My car seems to be almost free boosting without loading up the engine (mostly noticeable in 3rd, 4th and 5th gears)

There’s no kick to the engine, but there’s a lot of boost.

When revving the engine and looking under the bonnet It sounds like a slight exhaust leak from maybe the exhaust manifold..

To me that may be the reason the car is not taking off the way it should, does that sound right?

To give you an idea…..going up a hill at 80kph in 4th gear, I can floor it, hit a bar of boost (not good) and the car will actually DECELERATE.

Any idea’s or could I be on the money with an exhaust leak? Turbo is doing it’s job perfectly, the engine doesn’t seem to want to do it’s job tho.

Any help much appreciated

sounds like a blocked exhaust

HAYY ME AGAIN. Another thing

I noticed today, well it has always done this ASAK, there is a TSSIICKK TSSIICKK sound coming from the back of the engine when it is turned off, when HOT. It does this for propably 1 minute or so. It is somewhere at the back, but no idea where.

If you take the cap off while this is happening, the water moves up and down to the sound, and eventually comes over the top, then stops. No bubles in the watter comming through, just water, there was no more froth this afternoon.

I presume this is bad????

ALSO, the water in the reservour tank, when hot mine is over the full line, and cold it is below it, it is normall for the fluid to expand into the overflow bottle?

HELP Correct?

hmmmm, wel if my comp dont fix you car (ill find the leakdown tester too), then im going to steal your car for a couple of hours (could turn into days.... or weeks even :wave:) and check it right out for you :pirate:

"hmmmm, wel if my comp dont fix you car (ill find the leakdown tester too), then im going to steal your car for a couple of hours (could turn into days.... or weeks even ) and check it right out for you"

NO problems mate, you can have it. LOL. The wife would disagree though i recon.

That would be great Toffy. A leak down might help. Thanks. i don't have your number, can you PM it for me. I am free on Sat or Sun, and tehn next week, wife has late shifts all this week so i have the little one with me.

sounds like a blocked exhaust

I have a 3" dump from the turbo but it's still 2 1/2" press bent from the cat back and I know I need to change this soon, there is a slight and I do mean slight leak where the flanges meet but could that restriction be causing the problem do you think?

most other people suggest cooler piping, but it would do it every gear if that's the case I would have thought. It really is only under load from 70 kph while cruising that it just free boosts rather than loading up the engine.

It's bloody annoying especially going up the southern outlet each day, can't make it up the hill without hitting about 10psi (foot so slightly on the go pedal) in 4th gear.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...