Jump to content
SAU Community

Recommended Posts

this isn't always the case. brake clearance is determined by disk type, particularly in wheels with dish

haha!

I thought I typed that... must have just thought it.

Big brakes would be no good with my wheels (LMX5 - 4-pot Brembos would probably fit, but nothing bigger), but my mates Work wheels (similar dimensions) are fine for 6-pot Endless calipers.

So yes, definitely agree that the design of the wheel plays a more critical role.

Those look pretty similar to my Nismo rims (18x7.5 +40)

They will fit easily.

The only way that they may cause a bit of difficulty is if you have big brakes on the front.

I only have stock brakes so it should hopefully be ok.

No don't do it, they are too narrow and they will sit in way too much. I have 19 x 8.5 +20 offset rims on a S2 Type S Stagea. My car is lowered and I have had no guard rolling and I get no scraping at all.

You should go for at least 8.5 inch rims in about a +20 offset. Here is a pic of how my rims sit

I'm not too fussed if they sit too far in for appearance sakes, as I want aftermarket rims more to dress up the Stagea a little better than stockies. Thanks for the advice though. And your rims look sweet :P

Edited by Hanso

One other thing you should worry about with a large offset like that is that your wheels don't rub on the inside of your guards when you turn your wheels to a full lock for a U-turn or similar.

I'm running 18x8 rims with a +30mm offset off a V35 Skyline, and using 245/40 tyres, and the wheels sit perfectly in the guards - the rear guards needed rolling simply due to the width of tyres I chose to run.

NewWheels5.jpg

NewWheels6.jpg

come on boys its gotta be a 9" +30 at a minimum, they fill out the rears perfect without sticking out and fronts they sit in a fair bit, could do with a 10mm or 20mm spacer to look better. My new wheels going on very soon once i get the tyres fitted are 18x10 +20 and they fit perfect on fronts and sit out on the rears but i have a solution for that in the works so should look alright, pics to come :whistling:

example of agressive wheel fitment :laugh: sit the same as my vs-kf

can i ask out of curiosity what wheels you are getting? i LOVE wheels haha

come on boys its gotta be a 9" +30 at a minimum, they fill out the rears perfect without sticking out and fronts they sit in a fair bit, could do with a 10mm or 20mm spacer to look better. My new wheels going on very soon once i get the tyres fitted are 18x10 +20 and they fit perfect on fronts and sit out on the rears but i have a solution for that in the works so should look alright, pics to come :whistling:

Hey Mike you have commented on previous posts i showed the wheels when i test fitted them a while ago but havent had a chance to chuck good tyres on them so the 33 gtr ones are on at the moment. Heres the only pics i got of them...

lmsonstagea-1.jpg

rearrims.jpg

coilovers arnt low in the pic of rears as i couldnt be stuffed lowering it at the time so they arnt tucking in as much

here is the 33 gtr ones too, fronts definately need big fat spacers to sit right

33gtrrims.jpg

^^^ ooo what did you get? :(

because you have an rs4-s you might have fouling issues on the rear depending how low and how much neg camber you run - an 8mm slip on spacer may be required to stop the wheel from rubbing the strut. don't forget that even if it just clears stationary that it will bang the strut over big bumps when the suspension compresses and you get a momentary gain in neg camber

i'd recommend running 235/40's on those wheels up front - might run into guard issues with a 245

my car with 18x9.5+15 up front and 235/40's on lipped guards

100_0600.jpg

here's petes rs4-s with 18x9.5+15 235/40 all round and an 8mm slip on in the rear

100_0667.jpg

100_0666.jpg

^^^ ooo what did you get? :(

because you have an rs4-s you might have fouling issues on the rear depending how low and how much neg camber you run - an 8mm slip on spacer may be required to stop the wheel from rubbing the strut. don't forget that even if it just clears stationary that it will bang the strut over big bumps when the suspension compresses and you get a momentary gain in neg camber

i'd recommend running 235/40's on those wheels up front - might run into guard issues with a 245

my car with 18x9.5+15 up front and 235/40's on lipped guards

100_0600.jpg

here's petes rs4-s with 18x9.5+15 235/40 all round and an 8mm slip on in the rear

100_0667.jpg

100_0666.jpg

Was waiting for your reply! lol

DTM rush in shadow. (Had 18x9.5 Volk GT-N lined up but 1x cracked face = steer clear!)

Went the +15 offset to clear rear strut, 7.5' +38 - 9.5' +15 = 2mm closer to strut?

Test fit Tonight and pics with Ribbons this weekend!!! (Tying the knot)

Was waiting for your reply! lol

DTM rush in shadow. (Had 18x9.5 Volk GT-N lined up but 1x cracked face = steer clear!)

Went the +15 offset to clear rear strut, 7.5' +38 - 9.5' +15 = 2mm closer to strut?

Test fit Tonight and pics with Ribbons this weekend!!! (Tying the knot)

yep, 2mm closer. just keep an eye on it, the 2 manual stageas that i've seen with similar wheel specs to yours had minor rubbing issues so both had 8mm slip on spacers fitted up

those wheels will look nice - be sure to get pics up.. even of the test fit tonight :(

and congrats on the hitch!

Amazing how a RS4-s just swallows rear offset over the auto model. (rear subframe, knuckles or control arms different?)

the factory manual rear subframe is ~50mm narrower than the auto version (so both 260rs and rs4-s)

the factory manual rear subframe is ~50mm narrower than the auto version (so both 260rs and rs4-s)

So does that mean 10' will fit. Does the strut move in that much?

Anyone got pics of the rear of a RS4 with 18x9 +25

They will sit out a further 5mm from my R34 gtr rims +30

Looking at buying a set of rays GT-c's

So does that mean 10' will fit. Does the strut move in that much?

Anyone got pics of the rear of a RS4 with 18x9 +25

They will sit out a further 5mm from my R34 gtr rims +30

Looking at buying a set of rays GT-c's

10" is achievable with an auto subframe - a 10+22 will sit the same as a 9.5+15. i've lent adam (chef_stagea) one of my sets of wheels with 10+22 rear specs and he needs to run an 8mm floating spacer (effectively making them a 10+14) to stop them fouling the strut because the hub is closer to the strut on a manual subframe

i'd not worry about trying to find pics of a 9+25, as you said it's only 5mm out from a bnr34 item - good luck being able to notice the difference from a photo :P

Looks good, but not sure if I want the rears to hang that far out.

I have no more inner clearance on the rear with the 18x9 +30 I have now.

The new bilsteins (sydneykids) I have in there hit the 245/40/18 tyres. If I lower it any more. currently around 335-340mm. Not happy.

well here's a pic of adams car (260rs) that i mentioned earlier to put in to comparison with the above pics, if it helps at all?

17x9.5+24 17x10+16 (+22 with 8mm spacer) and 225/45's all round

Adam_260_3.jpg

Edited by M I K E

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...