Jump to content
SAU Community

Recommended Posts

Should fit pretty well, may be slightly outside the guards depending on camber, I think 245/40 r18 is the average size everyone uses. I've got 235/35 r18 and they are too small for the speedo.

alright cheers for that mate. will go with the 245/40s. hopefully fitting matte black work xd9s on a white stag.

I think you'll find they look quite awesome. :thumbsup:

Get some pics up; stat.

I think you'll find they look quite awesome. :thumbsup:

Get some pics up; stat.

yeah I've decided on some grids in flat black that are 18x9.5 +20 for now with 245/40s. should look tuff on white. just so keen to get the car already and don't like the stockies! ;)

I plan the have it for awhile so I'll start with the slightly cheaper set first and throw a bit more at some other goodies! it's coming with zeal adjustable coils and nismo exhaust system.

Edited by jwelshy19

yeah I've decided on some grids in flat black that are 18x9.5 +20 for now with 245/40s. should look tuff on white. just so keen to get the car already and don't like the stockies! ;)

I plan the have it for awhile so I'll start with the slightly cheaper set first and throw a bit more at some other goodies! it's coming with zeal adjustable coils and nismo exhaust system.

Post a pic once u get them

Correction

Im looking at getting some rota gtr-d 18x9.5 +25 for my 260rs! Will they fit without guard rolling

+12 would fit better from what I've seen on here, same fitment as an rs4s, go back a few pages

Correction

Im looking at getting some rota gtr-d 18x9.5 +25 for my 260rs! Will they fit without guard rolling

http://www.ebay.com....5#ht_499wt_1185

these would fit on mine nicely so ive been told without and rolling or lipping.

this was exactly what i may get, if i do get some it will be from these guys, only $99 shipping for the whole set. and i was looking at 245/40 proxes 4 tyres.

i could be changing my mind again and getting some 33 or 34 gtr rims!

rethinking of getting these actually, in hyper black with the polished lip :)

Edited by jwelshy19

9.5 +12 with 245s fit about perfect on my RS4S.

No scrubbing and and no guard work, I can put a wheel on my driveway at full lock with no worries.

If i am picky the front is a little wide but the rear is spot on.

My car is daily low, so two fingers to tyre on 19s.

+25 will be tight on the strut at the rear depending on the diameter of your strut.

9.5 +12 with 245s fit about perfect on my RS4S.

No scrubbing and and no guard work, I can put a wheel on my driveway at full lock with no worries.

If i am picky the front is a little wide but the rear is spot on.

My car is daily low, so two fingers to tyre on 19s.

+25 will be tight on the strut at the rear depending on the diameter of your strut.

nice. you reckon a +20 offset same width and tyres should fit about the same?

How much is guard rolling? My 260 is still standard height but will be getting coilovers and adjustable camber arms eventually

i have 19x8.5 Koya Endless rims with 235/35's on my rs4s with a +12 offset and lots of low. the rear tyres tuck up nice, the fronts needed rolling because the tyres just scrubbed at full lock. be warned, even at +12 and 235 wide, when i put somthign heavy in the back, i scrubbed the whole inside wall off my tyre on my coilover upper nut.... and my tyres have a very curved sidewall, so be carful of camber when lowering :D i learnt the hard way.

G'day everyone. Just after your opinion... I got a golden ARX and the original ARX wheels are way too much inside the guards, so I was looking for larger set of wheels to fill those massive arches and stick out a bit more - if not the wheel in line with the guard then as close as possible.

Bumped into these Speedy Chitah 19x8.5 +35 in Adelaide:

http://www.skylinesaustralia.com/forums/topic/354186-for-sale-thread/page__st__8300

So the question is do you think these will fit ARX and more importantly will they look good? How deep inside the arch they will seat?

Thanks in advance for your help.

+35 is too large, especially for an ARX. What you should look for are lower offset wheels, so they sit further out of the guards.

Disagree, I have 19x9 +45 with 10mm spacers (effectively making them a +35 offset) on my RX. I reckon that 9" wide with a +30-35 is about perfect (but I am not into the stretched look) for an RS/RX. Maybe another 5-10mm for the ARX/Axis?

BC-19x945-10mmspacer1.jpg

BC-19x945-10mmspacer2.jpg

I have a problem I thought you could fit 18x10-7 under standard guards

IMG_7962edit-682x1024.jpg

Will be putting in a s14 Rear Cradle which will bring the track in 20mm making them fit

That will help -then get the right size tyres and push the guards out a little and you will be looking good!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...