Jump to content
SAU Community

Recommended Posts

Make it as big as you can fit on your land and as high as possible , even if you dont want a hoist in there, its cooler and you can use the height for storage . Minimum 7 mtrs long if you want a bench at the rear .

415 volt comes handy for the hoist , welder and tyre machine .

If you can aford it make it double brick , much cooler than steel ( a lot more expensive though ) and use a sectional door not a roller .

If you need a heavy duty floor 150 mm thick with 2 rows of f82 mesh will do the trick , otherwise 125 mm thick with a row of f82 close to the top .

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

If you use the Merlin motor you wont have a problem.If your opening height is 2400mm,you will fit in a 4WD with a roof rack.

I recommend you use the CSI door,very strong door at a good price,B&D is good but dear,stay away from Steeline,Gliderol and Centurion.Dominator make a good door but expensive.

My garage doors aren't wide enough. It takes precision driving to drive the car in forwards let alone backwards. Misses the mirrors by about 3cm on each side. No way you'd get a wide 4x4 in there.

But I think my garage was designed for one door but instead has brick support down the middle. So it has double doors. It sounds so obvious but give yourself plenty of room either side of the car.

Thats the only thing that shits me about my garage. Oh and also its full of shit now so I can't put my car in there anyway. Don't let your missus use the garage for storage, she'll take it over.

everythings great so far

tho if you cant stretch the budget to 3 phase and a hoist, think about a simple pit. just a hole in the ground that you can comfortably fit into with a suitable lid. gf's old man did that and it works reasonably well

felt a bit hairy fixing a leak in my fuel tank from it tho.. as you have to get somebody to drive the car over you... pretty much sealing you in... with leaking fuel :\ ive seen others with steps leading down tho

Yeah, if I was building a garage I'd want a hoist.

Alternatively, I did see this on New Inventors recently:

Cartar 125 mobile automotive hoist

Apparently its not safe enough to spend a lot of time under the car (its more a panel beater's tool) but you could always use it as a full-body jack to put all four corners on wheel stands simultaneously.

this is my garage me and my dad built. the pics shows it with the frame up. its long finished now.

We bought the steel tubing all from scrap wreckers. The blue tubes are those real thick ones are used to build playground houses etc and go about a meter under the ground, in solid concrete.

The yellow poles are old stop and give way sign poles we bought. the are fully rust proof inside out.

The colorbond sheet i got from auction for real cheap.

we compacted the ground with a heavey duty compacter and i used a truck load or so of yellow sand.

the roladoor i got from the tip, a bit scracthed but a quick paint job made it look like new.

the most expensive stuff was the concrete. i needed two truck loads.

the f**king thing is hell solid and on a doesnt move or leak.

it fits the gtr in and has plenty of space all round. plus a ton of space for my work bench etc.

steve

post-11604-1130896136.jpg

duncan, definately make it as big as possible, spend some time thinking about airflow and light (both natural, and lighting). also definately get someone to come and lay the concrete for the floor as the laying down those pre made slabs sucks and they probably wont stay perfectly flat (plus all the joins are a pain).

like wrxhoon suggested brick would be ideal, but obviously more costly.

3 phase is a great idea too. also i would build a little brick enclosure behind it to put the air compressor in (with some sound proofing) and have it plumbed to two points in the garage (one each side) to save getting tangled up in air line all the time.

also a big strong beam down the length of it is a good idea for attaching a block and tackle to.

running water is handy also.

fridge is very nice but may lead to a poor standard of work during the summer as you may find yourself constantly pissed.

forgot to mension we laid electrical pipiing, and water pipiing for a tap and sink on the side of the garage (out of sight) and the pipiing allows me to have power sockets all around the garage. i had the fridge sorted way before i had even built the damb thing.

the air compressor housing is good idea, mine is in the shed and is loud.

might make a sound proof cabinet for it or something.

was thinking about a engine hoist but i bought a crane instead.

steve

steve

Always liked the idea of the old garage "pit" which allows you to work under the car - If you are building - cheaper than a hoist. Have it set up so that you can cover the hole with heavy duty timbers if you need to.

Pits have long lost their appeal because they are very dangerous , i wouldn't even think of having one in mine . If you want a hoist and you have plenty $ to spare the japs have fully recessed in the ground so you can drive over them as if they wern't there . A normal 2 post hoist acn be had for less than $2000 second hand and they are very handy to have , dont bother with with a 4 post or drive ons , minimum height 3.6 meters . You can install the hoist anytime as long as you have the power there .

i also think pits are horrible. it's like working in a dungeon. so it's not much fun if you get a little claustraphobic. also unless you put side access to it can't easily get in and out (means you always need someone there helping you). plus I much prefer a nice flat, clean floor. makes it easy to clean spills and easy to find sh1t when you drop something.

do i need to post up that report on jack related deaths again??? lol.

2 post hoist is definately the go, but for a home garage a big beam with a block and tackle will do the job too if you prefer more flexibility and more floor space. hoist and block and tackle is better though :P

This may sound stupid but if you fully work on your car I'd suggest putting in a gutter around the whole outside. I'm not sure if that's what you call it. Make sure it doesn't run straight into the drain though (a catchment or something?) so you can degrease and clean the floor.

The cement should be the shiny stuff so you can clean it.

Pretty obvious :\

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...