Jump to content
SAU Community

Recommended Posts


  1. fresh engine

  2. hid boost controlla

  3. gtss turbos

  4. tomei dump pipes [so fu*#%n expensive but worth it]

  5. n*power y pipe

  6. 200 cell cat then 3inch pipe into a 3inch cannon.

  7. nistune computer the computer makes a diffrence

  8. jc forge pistons but i dont think that that would make any power diffrence

  9. ajustable cam gears

  10. walbro 400lph fuel pump

  11. 1999 nissan stagea 260rs 271.4kw @ all 4s :bunny:
  12. how do i post a pic up???

Nissan R32 GTR 1993

Engine

High Octane Cam Baffles

NGK Spark Plugs

Yellow Jacket Coilpacks

HKS 264Degree 8.8mm lift Camshafts

Tomei Adjustable Cam Gears

Stock Head

720cc Sard Injectors

Stock Fuel Rail

Nitto Intake & Exhaust metal gaskets

Nitto Full Gasket Kit

ARP Head Studs

ARP Main Studs

ACL Race Big End Bearings

ACL Race Main Bearings

Cosworth 1.1mm Head Gasket

CP Pistons 86.5mm

Nitto H-Beam Rods

1.5mm oil restrictor

33 GTR Crankshaft.

JUN Oil Pump

N1 Water Pump

Gates Timing Belt

Ross Harmonic Balancer

Tomei Sump Baffle Kit

Standard Sump

Bolt ons

Standard Manifolds (Ceramic Coated)

Standard Plenum

Twin Turbo Pipe Air Splitter Mod

Apexi Power FC /w Hand Controller (Not D Jetro)

Garrett 2860-5's turbine housing both ceramic coated

Turbo Braided Oil and Water Lines

Tomei Extreme Dump Pipes

HKS Front Pipes

HKS Piping Kit

HKS Hi Power Cat Back Exhaust

Nismo Twin Plate Supercopper mix

HKS EVC 5 Boost Controller

Cooling Pro 42mm Aluminium Radiator

Z32 AFM's

Earl's Oil Filter Relocation Kit

Earl's Oil Cooler 18 Row /w Braided Lines

Custom Oil Catch Can

ARC Front Mount Intercooler

Aftermarket Fuel Pump

Tuned by Unigroup Engineering

370.5 RWKW @ 22psi

finaltune.jpg

  1. fresh engine
  2. hid boost controlla
  3. gtss turbos
  4. tomei dump pipes [so fu*#%n expensive but worth it]
  5. n*power y pipe
  6. 200 cell cat then 3inch pipe into a 3inch cannon.
  7. nistune computer the computer makes a diffrence
  8. jc forge pistons but i dont think that that would make any power diffrence
  9. ajustable cam gears
  10. walbro 400lph fuel pump

  11. apr stud kit
  12. nitto gaskit kit
    1999 nissan stagea 260rs 271.4kw @ all 4s :bunny:

dynoreadout.jpg

post-86035-0-77176700-1337847283_thumb.jpg

Finally got on the rolllers today, Didn't lean on it too hard! wanted to keep it safe!

Standard RB26 with GT3582R .82

precision 48mm wastegate

Platinum pro plug in

Made 359.3hp on 14psi

Planning a forged 26/30 in the near future!

1996 R33 GTR

N1 block, unknown internals

T88

Sucrogen E85

590awhp (hub dyno) @ 22psi

1000cc squirters maxed out & blowing spark out. New tune to come with ID2000's & HKS Twin Power or similar running 30psi

Edited by VSPECII33R
  • 2 weeks later...

1995 R33 GTR

120.000 km on clock

ARC front mount cooler with stainless steel piping

Upgraded fuel pump

Stock airbox

Nistune

oil cooler

ebay front pipes with 3 inch stainless steel exhuast de dat with verex tip

stock dump pipes

everything else stock

14psi on stock turbos made 335 rwhp.

R32 GTR 1993

HKS GTSS Twin Turbos

Nismo front pipe

HKS Dumps

Hks Exhaust

Nistune

Walbroo 400 lph Pump

650CC hks injectors

This engine has been rebuilt recently and has 9.1 comp.

Tuned by DVS Tuning

13.5psi 273rwkw. coilpacks failed at high boost im going back in a month to see what it makes with spitfires and cam gears.

post-86639-0-01532000-1340278836_thumb.jpg

Edited by Anz32GTR

Rb25 Block

CP Pistons

Eagle H beam Rods

Neo head with Solid Lifters

Tomei Cams

Rb25DET Oil Pump

ARP head & Bottom End Kit

Custom Winged Extra Sump 2L

60mm Waste Gate, HKS Air Pod

ApexiPower FC, Splitfire Coil Packs

2x Walbro 550HP Fuel Pumps

Rochester 1000cc Injectors

Custom TTR Fuel Rail

Malpassi Fuel Regulator

Borg Warner S400 Turbo with .9 Rear Housing

HKS Style GTR 100mm Tube Fin Intercooler

ACL Race Series Bearings

UAS Spilt Pulse Exhast Manifold, 3 Inch Exhaust

HP= 423

kW= 315

gallery_95212_5016_425400.jpg

Edited by PranK
Fix link

GTR r32 silver 93

79km

Le mans turbos

Tomei cam gears

HKS ehxaust

HKS dump pipes

Z32 afm

Nismo 555 injectors

Hi flow walhbro type petrol pump

Nistune ecu

Nismo main bearings

N1 water pump

Silicone hose kit

ACL race big end bearings

Greedy boost controller

Dyno run 27/04 316.1kwatw @ 20psi

Update:

Now with adjustable coilovers , straight trough pipe with hiflow cat and HKS cannon

Carbon pod filter cover

Alarm with keypad fitted

Future mods

Spitfire or OEM coilpacks

Larger injectors

Second highflow fuel pump

Catch can

  • 3 weeks later...

post-43227-0-88424500-1342226438_thumb.jpg

Standard RB26

2859-9 Turbos with HKS Actuators (GT-SS)

Racepace Cam Gears

HKS Front Pipe

Tomei Expreme Ti Catback

PowerFC D-jetro

PowerFC Boost Controller

Apexi Super Suction Kit

Splitfire Coil Packs

Sard Fuel Pump

Nismo Fuel Reg

Nismo Super Coppermix Twin Plate Clutch

309kW rear wheels @ 18psi :)

block machined , balanced , honed oversized 0.20

crank , remachined and re heat treated , oversized acl race bearings

rods , shotpeened and prepped rods with oversized acl race series big end bearings

pistons arias forged 0.20 oversized with acl race series rings ect

tomei oil restrictor

cossworth 1,5mm drag series metal head gasket

n1 water pump

nitto high flow oil pump

nismo low temp thermostat

trust oil filter relocation

tomei sump baffles/trap doors

brand new gasket set throughout

head reconditioned with

hks step 2 cams and valve springs quite lumpy

slight porting on exhaust side

greddy adjustable cam gears

turbos , brand new garrett -5 turbochargers

hks non turbulent dump pipes

twin 3inch up pipes with 3inch magic cats (100cfm)

single 3.5inch high flow system

5inch rear cannon

autogallery yokohohama/os giken 1-5 gearbox , custom double cone syncros , hd mainshaft , hd input shaft , one piece billet 5th gear built by terry at award in sydney,,,

brand new os giken twin plate clutch

vspec active rear lsd and axles ect

nismo 320kmph dash

apexi power fc commander with hand controller

blitz ebc

injector dynamics modified 1000cc injectors on standard rail

turbosmart adjustable fpr

bosch 044 pump

splitfire coilpacks

hks dli twin spark amplifier

tien adjustable suspension

412 - 418kw @ 25psi still on 98

Edited by vrkt33

block machined , balanced , honed oversized 0.20

crank , remachined and re heat treated , oversized acl race bearings

rods , shotpeened and prepped rods with oversized acl race series big end bearings

pistons arias forged 0.20 oversized with acl race series rings ect

tomei oil restrictor

cossworth 1,5mm drag series metal head gasket

n1 water pump

nitto high flow oil pump

nismo low temp thermostat

trust oil filter relocation

tomei sump baffles/trap doors

brand new gasket set throughout

head reconditioned with

hks step 2 cams and valve springs quite lumpy

slight porting on exhaust side

greddy adjustable cam gears

turbos , brand new garrett -5 turbochargers

hks non turbulent dump pipes

twin 3inch up pipes with 3inch magic cats (100cfm)

single 3.5inch high flow system

5inch rear cannon

autogallery yokohohama/os giken 1-5 gearbox , custom double cone syncros , hd mainshaft , hd input shaft , one piece billet 5th gear built by terry at award in sydney,,,

brand new os giken twin plate clutch

vspec active rear lsd and axles ect

nismo 320kmph dash

apexi power fc commander with hand controller

blitz ebc

injector dynamics modified 1000cc injectors on standard rail

turbosmart adjustable fpr

bosch 044 pump

splitfire coilpacks

hks dli twin spark amplifier

tien adjustable suspension

412 - 418kw @ 25psi still on 98

U can see the Graph here as i dont know how to put it up on here -_-

http://www.vicimportsclub.com/forums/thread-6114.html

R32 GTR with R33 GTR engine

new king bearings + sump baffle etc, standard pistons

trust t517z turbos

76mm HPI stainless dump pipes to 65mm front pipe and 3" cat back

ARC 70mm front mount

sard 700cc injectors

bosch 044 intank pump

power fc

blitz i-colour boost controller

apexi pods

OS Giken twin plate solid center clutch

331.6kw safe tune to match standard internal engine

post-24984-0-38562100-1342262158_thumb.jpg

bigger front pipes and cat back are next, plus tomei type B cams then retune.

retuned but added:

twin 3" to 3.5" front pipe

3.5" super high flow cat

3.5" cat back

Tomei cam gears

post-24984-0-67811300-1342261862_thumb.jpg

MUCH much better response and midrange

post-24984-0-93514900-1342261507_thumb.jpg

Edited by SiR_RB

Untitled-1.jpg

320kw @ 20.1psi

HKS GT-SS

Tomei Type B poncams with tomei cam gears

Haltech PLatinum pro running on MAP

Apexi pods

Hard intercooler piping with 100mm intercooler

KTS hard piping intake kit

Greddy Oil cooler

Stock dumps

3 1/2 inch front pipe

Apexi N1 catback

Nismo radiator

Nismo thermostat

Jun lightened flywheel cushioned button clutch

Greddy Air/water seperator

blitz boost controller

Nismo fuel pump

750cc injectors

Edited by sinistaGTR

Engine Mods

block machined , balanced , honed oversized 0.20

crank , remachined and re heat treated , oversized acl race bearings

rods , shotpeened and prepped rods with oversized acl race series big end bearings

pistons arias forged 0.20 oversized with acl race series rings ect

tomei oil restrictor

cossworth 1,5mm drag series metal head gasket

n1 water pump

nitto high flow oil pump

nismo low temp thermostat

trust oil filter relocation

tomei sump baffles/trap doors

brand new gasket set throughout

head reconditioned with

hks step 2 cams and valve springs quite lumpy

slight porting on exhaust side

greddy adjustable cam gears

turbos , brand new garrett -5 turbochargers

hks non turbulent dump pipes

twin 3inch up pipes with 3inch magic cats (100cfm)

single 3.5inch high flow system

5inch rear cannon

autogallery yokohohama/os giken 1-5 gearbox , custom double cone syncros , hd mainshaft , hd input shaft , one piece billet 5th gear built by terry at award in sydney,,,

brand new os giken twin plate clutch

vspec active rear lsd and axles ect

nismo 320kmph dash

apexi power fc commander with hand controller

blitz ebc

injector dynamics modified 1000cc injectors on standard rail

turbosmart adjustable fpr

bosch 044 pump

splitfire coilpacks

hks dli twin spark amplifier

tien adjustable suspension

412 - 418kw @ 25psi still on BP 98 Octane28s7nsz.jpg

Stock RB26 including stock cams

Precision 6262 .8 twin scroll

6boost twin scroll with twin tial 38mm gates

Custom dump and plumb back pipes

LINK ecu

ID2000 cc injectors in stock rail

Walbro 400lph

Running semi slicks on the dyno too

Gate pressure

E70

8fca5bae.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...