Jump to content
SAU Community

Recommended Posts


  1. fresh engine

  2. hid boost controlla

  3. gtss turbos

  4. tomei dump pipes [so fu*#%n expensive but worth it]

  5. n*power y pipe

  6. 200 cell cat then 3inch pipe into a 3inch cannon.

  7. nistune computer the computer makes a diffrence

  8. jc forge pistons but i dont think that that would make any power diffrence

  9. ajustable cam gears

  10. walbro 400lph fuel pump

  11. 1999 nissan stagea 260rs 271.4kw @ all 4s :bunny:
  12. how do i post a pic up???

Nissan R32 GTR 1993

Engine

High Octane Cam Baffles

NGK Spark Plugs

Yellow Jacket Coilpacks

HKS 264Degree 8.8mm lift Camshafts

Tomei Adjustable Cam Gears

Stock Head

720cc Sard Injectors

Stock Fuel Rail

Nitto Intake & Exhaust metal gaskets

Nitto Full Gasket Kit

ARP Head Studs

ARP Main Studs

ACL Race Big End Bearings

ACL Race Main Bearings

Cosworth 1.1mm Head Gasket

CP Pistons 86.5mm

Nitto H-Beam Rods

1.5mm oil restrictor

33 GTR Crankshaft.

JUN Oil Pump

N1 Water Pump

Gates Timing Belt

Ross Harmonic Balancer

Tomei Sump Baffle Kit

Standard Sump

Bolt ons

Standard Manifolds (Ceramic Coated)

Standard Plenum

Twin Turbo Pipe Air Splitter Mod

Apexi Power FC /w Hand Controller (Not D Jetro)

Garrett 2860-5's turbine housing both ceramic coated

Turbo Braided Oil and Water Lines

Tomei Extreme Dump Pipes

HKS Front Pipes

HKS Piping Kit

HKS Hi Power Cat Back Exhaust

Nismo Twin Plate Supercopper mix

HKS EVC 5 Boost Controller

Cooling Pro 42mm Aluminium Radiator

Z32 AFM's

Earl's Oil Filter Relocation Kit

Earl's Oil Cooler 18 Row /w Braided Lines

Custom Oil Catch Can

ARC Front Mount Intercooler

Aftermarket Fuel Pump

Tuned by Unigroup Engineering

370.5 RWKW @ 22psi

finaltune.jpg

  1. fresh engine
  2. hid boost controlla
  3. gtss turbos
  4. tomei dump pipes [so fu*#%n expensive but worth it]
  5. n*power y pipe
  6. 200 cell cat then 3inch pipe into a 3inch cannon.
  7. nistune computer the computer makes a diffrence
  8. jc forge pistons but i dont think that that would make any power diffrence
  9. ajustable cam gears
  10. walbro 400lph fuel pump

  11. apr stud kit
  12. nitto gaskit kit
    1999 nissan stagea 260rs 271.4kw @ all 4s :bunny:

dynoreadout.jpg

post-86035-0-77176700-1337847283_thumb.jpg

Finally got on the rolllers today, Didn't lean on it too hard! wanted to keep it safe!

Standard RB26 with GT3582R .82

precision 48mm wastegate

Platinum pro plug in

Made 359.3hp on 14psi

Planning a forged 26/30 in the near future!

1996 R33 GTR

N1 block, unknown internals

T88

Sucrogen E85

590awhp (hub dyno) @ 22psi

1000cc squirters maxed out & blowing spark out. New tune to come with ID2000's & HKS Twin Power or similar running 30psi

Edited by VSPECII33R
  • 2 weeks later...

1995 R33 GTR

120.000 km on clock

ARC front mount cooler with stainless steel piping

Upgraded fuel pump

Stock airbox

Nistune

oil cooler

ebay front pipes with 3 inch stainless steel exhuast de dat with verex tip

stock dump pipes

everything else stock

14psi on stock turbos made 335 rwhp.

R32 GTR 1993

HKS GTSS Twin Turbos

Nismo front pipe

HKS Dumps

Hks Exhaust

Nistune

Walbroo 400 lph Pump

650CC hks injectors

This engine has been rebuilt recently and has 9.1 comp.

Tuned by DVS Tuning

13.5psi 273rwkw. coilpacks failed at high boost im going back in a month to see what it makes with spitfires and cam gears.

post-86639-0-01532000-1340278836_thumb.jpg

Edited by Anz32GTR

Rb25 Block

CP Pistons

Eagle H beam Rods

Neo head with Solid Lifters

Tomei Cams

Rb25DET Oil Pump

ARP head & Bottom End Kit

Custom Winged Extra Sump 2L

60mm Waste Gate, HKS Air Pod

ApexiPower FC, Splitfire Coil Packs

2x Walbro 550HP Fuel Pumps

Rochester 1000cc Injectors

Custom TTR Fuel Rail

Malpassi Fuel Regulator

Borg Warner S400 Turbo with .9 Rear Housing

HKS Style GTR 100mm Tube Fin Intercooler

ACL Race Series Bearings

UAS Spilt Pulse Exhast Manifold, 3 Inch Exhaust

HP= 423

kW= 315

gallery_95212_5016_425400.jpg

Edited by PranK
Fix link

GTR r32 silver 93

79km

Le mans turbos

Tomei cam gears

HKS ehxaust

HKS dump pipes

Z32 afm

Nismo 555 injectors

Hi flow walhbro type petrol pump

Nistune ecu

Nismo main bearings

N1 water pump

Silicone hose kit

ACL race big end bearings

Greedy boost controller

Dyno run 27/04 316.1kwatw @ 20psi

Update:

Now with adjustable coilovers , straight trough pipe with hiflow cat and HKS cannon

Carbon pod filter cover

Alarm with keypad fitted

Future mods

Spitfire or OEM coilpacks

Larger injectors

Second highflow fuel pump

Catch can

  • 3 weeks later...

post-43227-0-88424500-1342226438_thumb.jpg

Standard RB26

2859-9 Turbos with HKS Actuators (GT-SS)

Racepace Cam Gears

HKS Front Pipe

Tomei Expreme Ti Catback

PowerFC D-jetro

PowerFC Boost Controller

Apexi Super Suction Kit

Splitfire Coil Packs

Sard Fuel Pump

Nismo Fuel Reg

Nismo Super Coppermix Twin Plate Clutch

309kW rear wheels @ 18psi :)

block machined , balanced , honed oversized 0.20

crank , remachined and re heat treated , oversized acl race bearings

rods , shotpeened and prepped rods with oversized acl race series big end bearings

pistons arias forged 0.20 oversized with acl race series rings ect

tomei oil restrictor

cossworth 1,5mm drag series metal head gasket

n1 water pump

nitto high flow oil pump

nismo low temp thermostat

trust oil filter relocation

tomei sump baffles/trap doors

brand new gasket set throughout

head reconditioned with

hks step 2 cams and valve springs quite lumpy

slight porting on exhaust side

greddy adjustable cam gears

turbos , brand new garrett -5 turbochargers

hks non turbulent dump pipes

twin 3inch up pipes with 3inch magic cats (100cfm)

single 3.5inch high flow system

5inch rear cannon

autogallery yokohohama/os giken 1-5 gearbox , custom double cone syncros , hd mainshaft , hd input shaft , one piece billet 5th gear built by terry at award in sydney,,,

brand new os giken twin plate clutch

vspec active rear lsd and axles ect

nismo 320kmph dash

apexi power fc commander with hand controller

blitz ebc

injector dynamics modified 1000cc injectors on standard rail

turbosmart adjustable fpr

bosch 044 pump

splitfire coilpacks

hks dli twin spark amplifier

tien adjustable suspension

412 - 418kw @ 25psi still on 98

Edited by vrkt33

block machined , balanced , honed oversized 0.20

crank , remachined and re heat treated , oversized acl race bearings

rods , shotpeened and prepped rods with oversized acl race series big end bearings

pistons arias forged 0.20 oversized with acl race series rings ect

tomei oil restrictor

cossworth 1,5mm drag series metal head gasket

n1 water pump

nitto high flow oil pump

nismo low temp thermostat

trust oil filter relocation

tomei sump baffles/trap doors

brand new gasket set throughout

head reconditioned with

hks step 2 cams and valve springs quite lumpy

slight porting on exhaust side

greddy adjustable cam gears

turbos , brand new garrett -5 turbochargers

hks non turbulent dump pipes

twin 3inch up pipes with 3inch magic cats (100cfm)

single 3.5inch high flow system

5inch rear cannon

autogallery yokohohama/os giken 1-5 gearbox , custom double cone syncros , hd mainshaft , hd input shaft , one piece billet 5th gear built by terry at award in sydney,,,

brand new os giken twin plate clutch

vspec active rear lsd and axles ect

nismo 320kmph dash

apexi power fc commander with hand controller

blitz ebc

injector dynamics modified 1000cc injectors on standard rail

turbosmart adjustable fpr

bosch 044 pump

splitfire coilpacks

hks dli twin spark amplifier

tien adjustable suspension

412 - 418kw @ 25psi still on 98

U can see the Graph here as i dont know how to put it up on here -_-

http://www.vicimportsclub.com/forums/thread-6114.html

R32 GTR with R33 GTR engine

new king bearings + sump baffle etc, standard pistons

trust t517z turbos

76mm HPI stainless dump pipes to 65mm front pipe and 3" cat back

ARC 70mm front mount

sard 700cc injectors

bosch 044 intank pump

power fc

blitz i-colour boost controller

apexi pods

OS Giken twin plate solid center clutch

331.6kw safe tune to match standard internal engine

post-24984-0-38562100-1342262158_thumb.jpg

bigger front pipes and cat back are next, plus tomei type B cams then retune.

retuned but added:

twin 3" to 3.5" front pipe

3.5" super high flow cat

3.5" cat back

Tomei cam gears

post-24984-0-67811300-1342261862_thumb.jpg

MUCH much better response and midrange

post-24984-0-93514900-1342261507_thumb.jpg

Edited by SiR_RB

Untitled-1.jpg

320kw @ 20.1psi

HKS GT-SS

Tomei Type B poncams with tomei cam gears

Haltech PLatinum pro running on MAP

Apexi pods

Hard intercooler piping with 100mm intercooler

KTS hard piping intake kit

Greddy Oil cooler

Stock dumps

3 1/2 inch front pipe

Apexi N1 catback

Nismo radiator

Nismo thermostat

Jun lightened flywheel cushioned button clutch

Greddy Air/water seperator

blitz boost controller

Nismo fuel pump

750cc injectors

Edited by sinistaGTR

Engine Mods

block machined , balanced , honed oversized 0.20

crank , remachined and re heat treated , oversized acl race bearings

rods , shotpeened and prepped rods with oversized acl race series big end bearings

pistons arias forged 0.20 oversized with acl race series rings ect

tomei oil restrictor

cossworth 1,5mm drag series metal head gasket

n1 water pump

nitto high flow oil pump

nismo low temp thermostat

trust oil filter relocation

tomei sump baffles/trap doors

brand new gasket set throughout

head reconditioned with

hks step 2 cams and valve springs quite lumpy

slight porting on exhaust side

greddy adjustable cam gears

turbos , brand new garrett -5 turbochargers

hks non turbulent dump pipes

twin 3inch up pipes with 3inch magic cats (100cfm)

single 3.5inch high flow system

5inch rear cannon

autogallery yokohohama/os giken 1-5 gearbox , custom double cone syncros , hd mainshaft , hd input shaft , one piece billet 5th gear built by terry at award in sydney,,,

brand new os giken twin plate clutch

vspec active rear lsd and axles ect

nismo 320kmph dash

apexi power fc commander with hand controller

blitz ebc

injector dynamics modified 1000cc injectors on standard rail

turbosmart adjustable fpr

bosch 044 pump

splitfire coilpacks

hks dli twin spark amplifier

tien adjustable suspension

412 - 418kw @ 25psi still on BP 98 Octane28s7nsz.jpg

Stock RB26 including stock cams

Precision 6262 .8 twin scroll

6boost twin scroll with twin tial 38mm gates

Custom dump and plumb back pipes

LINK ecu

ID2000 cc injectors in stock rail

Walbro 400lph

Running semi slicks on the dyno too

Gate pressure

E70

8fca5bae.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...