Jump to content
SAU Community

Gb: R33 Gts-t And Gtr And R34 Gtt Radiator Guides


Recommended Posts

you can get them anodised if you want to.

Any anodising place can do those colours in about three days go to whoa.

  • Replies 520
  • Created
  • Last Reply

Top Posters In This Topic

sry..can you do that for us Bass, I'll pay extra...I'm not really sure what anodising is...so if I sratch the pannel, will the silver bit show up, or the same colour as what I dyed..or anodised...

Hey Ppls.

Well, I checked out the guides on the R33 GTS T and GTR on the weekend and they are both perfect.

I will post details about payment and shipment and all that after I figure the shipping out and weights and all that.

For th anodising.... I'll get some quotes later this week and treat it seperatly.

BASS OUT

Hey ppls.

Well, the time has come to start collecting monies for these guides.

I have tested the guides on both the R33 GTS-T Series 1 and 2, and the R33 GTR and guess what, they are all good.

Sooooooooo........

I now need to know which suburb and state you all live in so that I can sort out freight to each of you.

Obviously the Melbournites can pick up the guides from the club meetings, but everyone else will need some freight.

So, can you all please confirm your locations and I will get freight numbers for each place and have you all pay the appropriate amount.

The guides are $80 each + freight.

Melbourne people, just put down that you will pick up, Easy.

Cheers Guys

Pete

im from melbourne, but when is the next meet? if its in march, ill probably be in QLD as im there from the 5th to the 19th....

if thats the case, ill be up for some freight as well i guess..

Pete, I am a bit strapped for cash this fortnight so can you please put one on hold for me and we can sort out cash in 2 weeks.

I am located on the Gold Coast QLD, 4212

Let me know what postage will be, these should be able to be sent through auspost btw :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Saw this video today from Adam LZ.    Long story short is he is claiming that the load from the engine fan once the fan clutch heats up(engaged) is increasing the getrag rattle(at idle) when you don't have a dual mass flywheel.  Before I go buying an electric fan setup .... Anyone heard of this ?    I must admit when my car is cold the getrag is pretty quiet and I do notice the rattle after it is all warmed up. I've always assumed this is due to the gearbox oil temp and tolerances of metal.       
    • Yep it sure does.   Tone wheel lines up in the same spot perfectly.    
    • Something I meant to say when we were chatting the other night about having an open trailer floor being great to work on a car, but you've never used the feature... It's a great place to park a car after doing suspension component changes, and do the tightening of all the bushes with the car sitting at full ride height. Especially when you don't have a 4 post hoist!
    • That is way more science than even I would use. I just eyeball it, not even accounting for the non-verticality of the tape measure when held on the lip and the centre at the same time. +/- 2mm is good enough for the girls I go out with.
    • So, before putting them in I need to understand the stock ride height. This is how I measured it: First, check the diameter of the wheel's centre cap, it was 52mm. Then put a piece of masking tape approximately across the centre and measure 27mm (half) from at least 3 sides to get a reasonable idea of the centre of the wheel cap. Mark that with a horizontal line as one measuring point. Then, directly above the wheel on the guard, put another piece of masking tape in approximately the centre. Use a string line to find out the point on the guard above the centre of the wheel cap and mark that. Then it is simple, just a tape measure to check the distance from centre of the wheel to the centre of the guard. Final results where  LF: 381mm RF: 379mm LR: 401mm RR: 400mm Pretty even considering they are 120,000klm old factory springs, lets call that 380 front and 400 rear.
×
×
  • Create New...