Jump to content
SAU Community

R34 Gt To Gtt Engine Swap


Chids34
 Share

Recommended Posts

Ive recently bought a R34 Gt non turbo coupe and decided that it could do with a turbo, however after a little research I've found that turbo'ing a Rb25De motor is a pain in the ass and has quite a few problems. From my knowledge the primary reason that a Neo De motor cant be turbo'ed efficiently is due to its high compression pistons (correct if wrong) therefore is it possible to buy a complete De motor and put low compression pistons in? Basically can I build a GTT motor from a Non turbo block or is there something else that I'm missing or other things involved.

Thanks heaps.

Link to comment
Share on other sites

Yep. You are missing brakes, gear box, diff, legally registered etc.

It's been said time and time again, including by people that have done it, it is not worth it. Buy a gtt.

Also a De neo has smaller head ports and tiny cams, and long with different inlet manifold and plenum. Not just the pistons are different. Buy a gtt.

Link to comment
Share on other sites

Ive recently bought a R34 Gt non turbo coupe and decided that it could do with a turbo, however after a little research I've found that turbo'ing a Rb25De motor is a pain in the ass and has quite a few problems. From my knowledge the primary reason that a Neo De motor cant be turbo'ed efficiently is due to its high compression pistons (correct if wrong) therefore is it possible to buy a complete De motor and put low compression pistons in? Basically can I build a GTT motor from a Non turbo block or is there something else that I'm missing or other things involved.

Thanks heaps.

It will be cheaper and quicker for you to buy a GTT; than to do an engine transplant, plus all the extra needed upgrades as mentioned above. Plus the wiring looms are different. Save your money and buy one already turbo'd.

Link to comment
Share on other sites

you can keep asking untill someone sais its a good idea, but its not.
sell the na, take your 2k maby save a bit more (less that its about to cost you) and buy a gtt.

buy a gtt

BUY A GTT

BUY A GTT

Link to comment
Share on other sites

And if I bought a GTT engine with loom and ecu would it work, because I can drop one in for under 2k and that'll save me spending 10k+ on a Gtt

What about brakes gearbox diff and legalities? That will blow your budget to bits.

Link to comment
Share on other sites

I dont care about the brakes, its a auto and as it'll be racing primarily in a straight line its staying an auto, and whether its legal or not I could care less I just want to know if I can put a GTT motor in a GT, not whether I should buy a GTT, rephrase 'Can a GTT engine and loom be connected to the existing R34 GT and run, not including support mods or legalities, can it bolt up and run as a turbo motor'. Its just as a project car its mainly sitting around I can worry about the diff and brakes later when its ready to be driven, Its whether it will bolt up to the existing structure have all the turbo piping connected and running so I can turn the key start the car and move it around my property?

Link to comment
Share on other sites

Yes It will bolt in. It's the same engine essentially. You can even bolt in ls engines. Heaps of engines would fit

An na trans is totally shit.

These threads rule.

Link to comment
Share on other sites

you can keep asking untill someone sais its a good idea, but its not.

sell the na, take your 2k maby save a bit more (less that its about to cost you) and buy a gtt.

buy a gtt

BUY A GTT

BUY A GTT

Do this

I'm glad I did ;)

Link to comment
Share on other sites

I dont care about the brakes, its a auto and as it'll be racing primarily in a straight line its staying an auto, and whether its legal or not I could care less I just want to know if I can put a GTT motor in a GT, not whether I should buy a GTT, rephrase 'Can a GTT engine and loom be connected to the existing R34 GT and run, not including support mods or legalities, can it bolt up and run as a turbo motor'. Its just as a project car its mainly sitting around I can worry about the diff and brakes later when its ready to be driven, Its whether it will bolt up to the existing structure have all the turbo piping connected and running so I can turn the key start the car and move it around my property?

I had a na (not my choice) that I turned into a fully built auto everything

in short, buy gtt

Simply looking at the stuff on a GT, vs whats REALLY on the GTT you will buy a GTT. There's differences in little things all over the place.

Sell NA to a P plater.

Buy GTT.

It is the smartest thing you will ever do.

  • Like 2
Link to comment
Share on other sites

thats not what you asked,

you stated you have a gt which you want to put a gtt engine into.

your intentions are to drag race it and hope to do this to save money instead of selling up and buying a gtt.
this will not work, it will not be cheaper and you will still not have a gtt.

if you want to do it just do it. however you can't ask for opinions just to get a unanimous answer backed up by experience, then get annoyed that no one is in agreance with your plans validity.

Edited by GH05T
  • Like 1
Link to comment
Share on other sites

Pretty much anything with 'swap' or 'conversion' in the title is not worth it if you're looking to save a) money, b) effort and/or c) headache.

Sell the GT, buy a GTT.

Sorry to rain on the parade.

Link to comment
Share on other sites

It isn't just that though

Gearbox IS different (inside, had an auto guy literally laugh at the GT gearbox (after being built up by MV autos) whereas the GTT one he said "this is a muuuch better design and is quite nice"

Driveshaft, diff is different.

Bracing for everything is different. Have to ask why Nissan beefed it all up.

So you could do what I did, which is

a) replace GT engine with GTT engine

b) replace GT transmission with GTT transmission

c) replace GT brakes with GTST/356mm BBK

d) replace entire suspension setup

e) replace exhaust (the GTT one aint great but lol better than the GT surely)

f) replace fuel pump/entire fuel pump wiring (its terrible in GT)

g) replace diff

Its not just the engine, if you want to put a GTT engine into a GT, and want it to work just like a GTT, you will end up replacing every major component with GTT spec (or better).

Which means you end up replacing the entire car anyway.

If you're going to do that, there's a simple, easy way to swap it all at once, which is buy a GTT.

  • Like 3
Link to comment
Share on other sites

It isn't just that though

Gearbox IS different (inside, had an auto guy literally laugh at the GT gearbox (after being built up by MV autos) whereas the GTT one he said "this is a muuuch better design and is quite nice"

Driveshaft, diff is different.

Bracing for everything is different. Have to ask why Nissan beefed it all up.

So you could do what I did, which is

a) replace GT engine with GTT engine

b) replace GT transmission with GTT transmission

c) replace GT brakes with GTST/356mm BBK

d) replace entire suspension setup

e) replace exhaust (the GTT one aint great but lol better than the GT surely)

f) replace fuel pump/entire fuel pump wiring (its terrible in GT)

g) replace diff

Its not just the engine, if you want to put a GTT engine into a GT, and want it to work just like a GTT, you will end up replacing every major component with GTT spec (or better).

Which means you end up replacing the entire car anyway.

If you're going to do that, there's a simple, easy way to swap it all at once, which is buy a GTT.

I have heard that the wiring is different, and you would need to rewire the GT interior into GTT ECU.

Link to comment
Share on other sites

  • 6 years later...

Chids34,

Its not always worth buying a GTT instead of modifying a GT

if you want it build it, do it how you want.

i too have a GT which i have built into a GT/GTT/GTR what ever you want to call it, its a R34 skyline that i built to suit my wants and needs.

in many cases using a GT car as the start up build platform may be better for what you are building, as i too did not want to buy a GTT just to get a turbo engine then to have to eliminate many other parts and functions that makes it a GTT, example i didn't want like 4 wheel steering, traction control, etc. and if you come across a good deal, or a rare gt factory color like i did , dont pass on it hoping to find the same but in a GTT. well worth it to buy or stay with the GT and modify.

if you want to do that, do it.

there are situations where it is worth it to do it the way you originally described.

as far as this list:

a) replace GT engine with GTT engine/ would be a nice upgrade and way easier then putting turbo on a RB25DE

b) replace GT transmission with GTT transmission/ not a must as the stock GT trans are fine

c) replace GT brakes with GTST/356mm BBK/ not necessary for your application, yet, easy if want to do it upgrade brakes

d) replace entire suspension setup/ certainly not necessary get coil overs and add rear sway bar, then functionality same as GTT

e) replace exhaust (the GTT one aint great but lol better than the GT surely) /you probably going to mod the exhaust anyway

f) replace fuel pump/entire fuel pump wiring (its terrible in GT)/ this i would due not cause GT are terrible but because of the age

g) replace diff/ even if it was a GTT, these have vis diffs, which your gonna want to change to a mec. LSD and way, which are available for a GT rear diff

 

main recap build it how you want , and dont let any one tell you its not worth it, factor in what you want to spend on time and money. then do it the way you see fit.as long as you dont do anything illegal or try to sell it as something its not. who cares, build it the way you want. 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I have been looking at some setting on the alarms for the Q60 and what buttons do and so and also been looking for details on the alarm in my V37 which is a standard issue with the car. settings like window roll up and a few others seem to not work at all. i cant seem to find exact info on V37 alarms so Q60 is all i can really go off i have not tried 400Z alarm settings or info yet so that will be next. any one got like a sheet of info on the alarm system in the V37 as all my documents are in japanese but i thought the system would basically be like standard through similar models? 
    • I had a fuel smell coming from the drivers rear and pulled the tank out to inspect where it was coming from, turns out the breather hose from the tank to the filler neck was perished. I’m going to Japan next week and I’ll grab it while I’m there  pulled the oil tank apart and started cleaning this crap out of it, some brake cleaner and rags got it looking new again 
    • Hmm. Was quite a few years ago now. I think I bought from a crowd in the US called CDT Audio. The speaker is the HD-6. The HD-6CF would have been the better option (based on T-S parameters), but they were discontinued in 4 ohm at that point in time. The HD-6 is a better driver in almost every other way (than the CF) - just not as good in IB. They still do the HD-6. They might even have a more suitable (for IB) option here.https://www.cdtaudio.com/cdtnew22/products/components/woofers/midwoofers/midwoofers.htm But, here's the rub. I was working in the US a lot back then, so I got them delivered to my US office and then just brought them back to OZ myself. I don't know if they will ship to OZ, and it probably wouldn't be great cost-wise anyway. As to results. They're driven direct off the rear channels of my headunit, because the headunit can be setup to run the rears as subs. So, not a lot of power being fed there. Nevertheless, there's no shortage of volume - the sub levels don't need or want to be boosted at all. The bass is definitely not what you would call "tight". It is definitely a bit delayed compared to a proper sub. But, with the great front soundstage and really good 6.5" woofers in the front doors, I'm getting most of the bass detail from the front and the rear is really only to extend the bottom end a bit. Works for what I'm doing. I mean - until recently you couldn't really hold a conversation in my car due to the fuel pump, and for many years I had tyres so noisy (Kumho KU36 at <50 tread depth) that I had to drive with earplugs anyway!
    • curious to know what drivers you chose and the results? quik mafs, says two 6.5s should roughly equate somewhere between a single 8" or 10" driver. i agree that IB is definitely the way to go in most cars imo.
    • S13 and R32 rear suspension geometry is horrible once you lower it (which everyone does). The camber & toe out ramp is very aggressive, hence it's common for the S13 boys/girls to use a S14 or S15 subframe as the geometry is light years ahead. I'm sure the same can be done on R32s, but I don't know anyone that has done that.
×
×
  • Create New...