jhjones
Members-
Posts
424 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by jhjones
-
they are out on their website!
-
Still not on their website
-
Would be keen for a set.
-
nvm
-
Condenser: 92110-AA401- Receiver-Driers: 92131-5L312-
-
No. My fast only goes to 2000
-
92131-5L312- 9900-9908 92131-5L360- 9908+
-
Yours is a 9902 so it must be 92110-AA400-
-
theres two different part numbers for the GTR. Whats you chassis number? 92110-AA400- (9901-9904) 92110-AA401- (9904+)
-
Different part numbers according to nissan fast
-
Not getting full boost in first gear
jhjones replied to jhjones's topic in Forced Induction Performance
alrgiht guess its normal. wastegate is 1 year old btw -
Not getting full boost in first gear
jhjones replied to jhjones's topic in Forced Induction Performance
Boost control is done by the link using a mac valve. If there was a leaky diaphragm wouldn't i hear it leaking out the port on the mac valve when i pressurized the intercooler pipping. Same with a leak in the vacuum/pressure hose except i would hear it leaking from the hose. In the high gears boost shoots up the 15psi then slowly creeps to 18psi. Normal? -
Hey, got this problem, I'm not getting full boost (18psi) in first gear, only getting 15psi. When I switch it to low boost (15psi) I only get around 12psi in first gear. I can hear the screamer pipe from around 9 psi on the high boost setting. The wastegate spring is 1 Bar, Ive pressurized the intercooler piping up to 24psi and there are no leaks. I can't remember if it was like this when I got the car tuned as I don't really drive the car. Mods: RB25DET Neo GTX3071R Link G4 50mm Turbosmart wastegate 6Boost low mount twinscroll Manifold
-
R32 N1 Rear Window Part Number
jhjones replied to LTSJayce's topic in RB Series - R31, R32, R33, R34 (1986-2002)
Seems to be two different part numbers depending on the colour for the rear window. The seal/trim kit is 79750-04U10- -
R32 N1 Rear Window Part Number
jhjones replied to LTSJayce's topic in RB Series - R31, R32, R33, R34 (1986-2002)
can we have your chassis number? -
Swapping pinion and crown for GTR diff
jhjones replied to Yonz's topic in Drivetrain and transmission
Does the s15 diff have a speed sensor on the pinion? if so you need to put the gtr center an stub axles into the s15 diff -
R33 N/a 4 To 5 Stud
jhjones replied to NoticeMeXavier's topic in RB Series - R31, R32, R33, R34 (1986-2002)
Unless its hicas -
I think ill give motul rbf 600 a go next track day. What i did was bleed the calipers till the new fluid came through. Should I take the lines off the calipers to drain them before i bleed it?
-
Why does it only happen on the cool down laps? When Im hammering the car the pedal is good.
-
So the fix would better fluid? Motul RBF660? If that doesn't work do I need bigger brakes?
-
So I did a track day on Sunday and on the 3rd session on the cool down lap my brake pedal went to the floor. I bleed the front calipers and pedal became good. Went back out and on the cool down lap the pedal went to the floor again. This happened 3 times. Car is R32 GTST, R33 GTS25T brake calipers, Nulon Xtreme Super Dot 4 Brake fluid, Endless MX72 Brake Pads.
-
z32