Jump to content
SAU Community

Recommended Posts

I wouldn't breathe too easy just yet either. Customs have 5 YEARS to back date records and request payment for goods imported. Which means that anytime in the next 5 years you may recieve a notice for payment which you will not be able to avoid or contest.

And rest assured Customs HAVE been known to chase duties owing years down the track.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1872958
Share on other sites

  • Replies 343
  • Created
  • Last Reply

Top Posters In This Topic

Yes,

There is laws and info for this.

http://www.customs.gov.au/

AT THIS STAGE I WOULD LIKE TO POINT OUT THAT THIS IS NOT DIRECTLY CONCERNED WITH NENGUN PERFORMANCE ONLY. THESE POSTS ARE INTENDED TO INFORM YOU CONSUMERS OF THE LAWS AND ALSO INTERNET SUPPLIERS OBLIGATIONS TO YOU. BY INTERNET SUPPLIER I MEAN ANY BUSINESS WHO TAKES ORDERS AND PAYMENT OVER THE INTERNET AND SHIPS THE GOODS DIRECTLY TO YOU FROM OVERSEAS.

I hope this clears up a lot of grey areas for people buying parts of internet suppliers.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873063
Share on other sites

Well anyway, Ive ordered a couple of times from nengun.. took about 3 weeks to get some apexi pods etc. This time I ordered a *huge* quantity of air filters... ie one.. which is out of stock apparently, paid for 3 Dec and still waiting til the 25th Jan or thereabouts to receive it.

Apart from this delay, had no issues thus far, was very happy with the last order.

I have heard that Greenline are a bit cheaper though... but nengun is much easier to impulse buy :)

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873140
Share on other sites

Well anyway, Ive ordered a couple of times from nengun.. took about 3 weeks to get some apexi pods etc. This time I ordered a *huge* quantity of air filters... ie one..  which is out of stock apparently, paid for 3 Dec and still waiting til the 25th Jan or thereabouts to receive it.

Apart from this delay, had no issues thus far, was very happy with the last order.

I have heard that Greenline are a bit cheaper though... but nengun is much easier to impulse buy :)

It is quite easy to compare prices for gear between Nengun & Greenline. Obviously then you go to whomever is cheapest as both have a good reputation. Not rocket science, really. For the stuff I ordered Nengun happenned to be cheaper. :)

I recently ordered a few grands worth of gear through Nengun & it all arrived - the only slow stuff was because there was no stock with the suppliers. It arrived without customs duty - possibly something to do with the way it was marked up on the packaging...

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873227
Share on other sites

i ordered a power fc and a short shift kit and i didnt pay any tax.

it took a few weeks and i didnt get a short shift, i got a replacement shifter. was no shorter than the stock one, we compared it to mine and my mates gtr as well. Nengun pretty much told me to get stuffed so i haven't bought any more stuff from them.

The power fc was good tho and only like $900. so with the money i wasted on the shifter i could have bought the pfc in a shop here and had it right away.

Edited by RRR32_GoDzIlLa
Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873336
Share on other sites

Which Short Shift kit did you buy?? Because the length of the shifter isnt any different, it's the throw and the distance between gears that changes when you fit it. The Nismo ones even look like standard Nissan ones.

Either way, it should have come in a Nismo or C's Box (Depending on which one you bought) so if it was out of the box I'd be questioning if it's even a new shifter.

I suggest you fit it and see if there is any difference in the throw. If it's still the same length throw then you've been supplied a 2nd hand std shifter and I'd be going to the ACCC to find out if there is any recourse for you. Don't let this go mate. You payed for the product and he has an obligatino to supply it to you.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873535
Share on other sites

I've always found Nengun to be the cheapest on average, followed very closely by Greenline. But anything I've ordered from Greenline has come within 2 weeks after payment has been confirmed, Nengun takes a little longer.

I've ordered a few bits and pieces from Greenline and also Perfect Run and have never been hit with customs duty on things under $1000 or had to fill anything out for something that I ordered >$1000. None of these items were marked as a gift. So did I get lucky or can I expect a letter within the next 5 years?

"The internet? Is that thing still around?"

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873568
Share on other sites

Which Short Shift kit did you buy?? Because the length of the shifter isnt any different, it's the throw and the distance between gears that changes when you fit it. The Nismo ones even look like standard Nissan ones.

Either way, it should have come in a Nismo or C's Box (Depending on which one you bought) so if it was out of the box I'd be questioning if it's even a new shifter.

I suggest you fit it and see if there is any difference in the throw. If it's still the same length throw then you've been supplied a 2nd hand std shifter and I'd be going to the ACCC to find out if there is any recourse for you. Don't let this go mate. You payed for the product and he has an obligatino to supply it to you.

yes that is what i meant. there is no difference in the length between gears. it is a nismo, apparently. i did fit it and take it back off again

Edited by RRR32_GoDzIlLa
Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873663
Share on other sites

I have used both Greenline and nengun.

Both were fine to deal with. No problems, no hassles. Once payment was confirmed, parts arrived within the month (usually earlier).

I guess it depends if they have the parts in stock as to how quickly it gets to Aust.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873671
Share on other sites

I like Greenline better than Nengun as they are quicker etc... but whoever you order from make sure to ask if they have it in stock before you part with the cash as it is not usually Greenline/Nenguns fault when things are held up... they are simply waiting for their suppliers to send the parts

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873796
Share on other sites

if they screwed you over with the short shifter and refused to fix the problem up for you, tell them that you're a member of SAU, a site they sponsor, and im sure they'd understand that in their line of business word of mouth is the majority of their advertising, and bad feedback from you for example on SAU wont help their cause :D

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1874440
Share on other sites

if they screwed you over with the short shifter and refused to fix the problem up for you, tell them that you're a member of SAU, a site they sponsor, and im sure they'd understand that in their line of business word of mouth is the majority of their advertising, and bad feedback from you for example on SAU wont help their cause :D

i had a go at em and sent em plenty of e mails and they said -

Apologies for the delayed response. The unit shipped to you is the Nismo

product number 32839-RN595. This is as provided by Nismo sold on the

domestic market here in Japan. The product information reports a 30%

shorter throw than the standard shifter.

As agreed to on the website when placing your order, we encourage you to

confirm all product details with your mechanic/tuner before purchase.

Thanks,

Alan

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1874465
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...