Guest Posted August 9, 2008 Share Posted August 9, 2008 I have a 1993 r32 GTS-T Got: FMIC K&N Pod Cold Air Intake (diy job) Sard High Impedence 550cc Injectors R33 S2 turbo (off an auto with about 40,xxxk's, never seen more than 5psi), got it highflowed by a joint in dandenong (forgot name now), but $1200 later with garrett internals its rated at 350hp Split dumps High Flow cat (shit condition, getting replaced next sat) 3" catback 4.5" tip (also being replaced next sat) Dr Drift ECU Remap Dr Drift Boost controller running 16.5psi Bosch 040 Pump Was originally running 210rwkw, then the cat started collapsing in on itself, so dr drift (sam) backed it off to 200kw for now, but with the zorst fixed should easily be back at 210. I use it for work mostly, and i drive to the northern suburbs a bit, its great for a daily drive, and completely hauls arse when i put my foot down. Spent about 6-7k on the engine so far, well maybe 8, but its so worth it, rb20's can go with a few sensible mods Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4067722 Share on other sites More sharing options...
thatjonokid Posted August 13, 2008 Share Posted August 13, 2008 1992 R32 gts-t -RB20DET w/ 205k kms -Stock Internals -Stock Turbo -Stock boost -Stock ECU -Stock fuel system -3" Cat back Exhaust -No Cat -BLITZ LM Suspower pod -600x300x75 FMIC w/ 3"piping 142.2rwKw @ MRC Performance Castle Hill This was recorded with a dodgy AFM as well running so rich that at times it was off the scale!!! Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4072319 Share on other sites More sharing options...
mark_sudakov Posted August 13, 2008 Share Posted August 13, 2008 (edited) 1993 R32 gts-t - RB20DET w/ 100000 kms - Stock Internals - Stock Turbo - Turbotech Manual Boost Controller - 12psi, dropping to 11psi - SAFC2 - Walbro pump - 3" Turboback Exhaust - Apexi pod - Just Jap FMIC First tuned run was 168.5kW Last run 162.5rwKw @ Unigroup Engineering Edited August 13, 2008 by mark_sudakov Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4072397 Share on other sites More sharing options...
KyussR32 Posted August 15, 2008 Share Posted August 15, 2008 (edited) After 4 months off the road I just got it back, goes really well. Internally stock RB20 K&N Pod and shield Full 3" exhaust and dump pipe Intercooler GTR Injectors and uprated fuel pump Hi Flo R33 Turbo, steel wheels etc Turbosmart fuel pressure regulator Bang on 200rwkw @ 16psi, full boost at 4500-4600 rpm After 4 months off the road I just got it back, goes really well.Internally stock RB20 K&N Pod and shield Full 3" exhaust and dump pipe Intercooler GTR Injectors and uprated fuel pump Hi Flo R33 Turbo, steel wheels etc Turbosmart fuel pressure regulator Bang on 200rwkw @ 16psi, full boost at 4500-4600 rpm Opps forgot to mention a couple of important bits to my list above - Z32 Air Flow Meter - Chipped by Robin at Torque Performance Edited September 5, 2008 by R31Nismoid Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4075980 Share on other sites More sharing options...
RB ONEVIA Posted August 16, 2008 Share Posted August 16, 2008 (edited) RB20 Onevia dynoed last year with: JJR fmic + custom piping Drift pod 3 or 3.5" cat back everything else stock made 151.1rwkw at 10.6psi now has a 3" metal cat and JJR 19 row oil cooler and 12psi so should have a little more. Edited August 16, 2008 by RB ONEVIA Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4078542 Share on other sites More sharing options...
R32_GODZILLA Posted September 4, 2008 Share Posted September 4, 2008 92' R32 GTS-t Type-M Mods: - Internally standard rb20 - Hybrid FMIC - Apexi Power Intake POD - GK-Tech split dump/front pipe 3" - high-flowed cat - Blitz Nur Spec-V Cat-Back - Bosch 040 fuel pump - RB25 turbo w/rb20 actuator - Turbotech Boost Controller set @ 13psi - CEF11E remap 186.8kw atw Graph: Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4112452 Share on other sites More sharing options...
DC_GTST Posted September 20, 2008 Share Posted September 20, 2008 1993 R32 gts-t - RB20DET w/ 100000 kms - Stock Internals - Stock Turbo - Turbotech Manual Boost Controller - 12psi, dropping to 11psi - SAFC2 - Walbro pump - 3" Turboback Exhaust - Apexi pod - Just Jap FMIC First tuned run was 168.5kW Last run 162.5rwKw @ Unigroup Engineering Have you stolen my car mark? haha RB20DET Bosch 044 Intercooler 3" Exhaust Turbotech Bost controller on 13psi Stock Internals Exactly same power = 162.5rwkw -> Boost Worx. Will post dyno shoot soon Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4144798 Share on other sites More sharing options...
45LDE Posted September 26, 2008 Share Posted September 26, 2008 1992 R32 GTS-T RB20DET (Stock internals) 165 000km HKS GT2530 on 14psi Bosch 023 Sard Fuel Reg Stock Injectors Stock ECU FMIC Pod Oil Cooler 3" turbo back exhaust 272hp Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4158811 Share on other sites More sharing options...
Gus- Posted October 4, 2008 Share Posted October 4, 2008 my R32 as of last week. o2 sensor was faulty so it got replaced...two lines are before (blue) and after (green) pretty happy with the power...i think my tuner said it was running 10PSI (no boost gauge) even though there is no bleed valve...other mods are 3", pod, intercooler. madness Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4175340 Share on other sites More sharing options...
Jum Posted October 17, 2008 Share Posted October 17, 2008 RB20DET (Stock internals) HiFlow RB25 turbo @ 12-13psi Fuel Pump Chipped ECU FMIC Pod 3" turbo back exhaust (with 2¾ piping restriction at the cat) 181.3kw (243.1hp) Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4201984 Share on other sites More sharing options...
hybridracer Posted October 17, 2008 Share Posted October 17, 2008 129000km RB20DET Stock internals Cheap Chinese T3/T4 turbo (.50 front, .63 rear) Front mount GTR injectors 3inch Exhaust 38mm External wastegate 80mm throttle body Front facing plenum Adjustable cam gears Big fuel pump Plug in LINK GTS computer Pod filter Tuned By NZEFI in Christchurch, New Zealand 351hp/262kw @18psi Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4202250 Share on other sites More sharing options...
vinnie32GTS4 Posted October 20, 2008 Share Posted October 20, 2008 1993 R32 GTS4 RB20DET Stock Turbo Stock ECU 3" turbo back exhaust with hiflow cat FMIC HKS green Pod CAI Turbotech Boost Controller set at 12psi made 181 RWKW at fisher performance Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4207832 Share on other sites More sharing options...
Wogan Posted November 10, 2008 Share Posted November 10, 2008 1990 32 gts-t series 1 rb25 turbo @ 14psi apexi pod filter greddy FMIC r33 GTR fuel pump just jap split dump pipe high flow cat greddy pe2 cat-back nistune ecu 241.2hp (179.9kw) @ 6300 rpm on dyno dynamics Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4252801 Share on other sites More sharing options...
Rekin Posted November 13, 2008 Share Posted November 13, 2008 1993 R32 GTS-t Standard RB20 ARC 105mm SideMount intercooler (50% larger than r34 gtt) SplitFire Coilpacks Apexi Catback Batmbl Split Front/Dump 3inch stainless steel Xforce hiflow cat GTR Fuel pump 3A Raciing Airpod HKS GT2530 with rb20 actuator Standard Ecu - No Tune Standard Injectors - maxing out A lot of thanks to ReCustoms - www.recustoms.com.au Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4259748 Share on other sites More sharing options...
45LDE Posted November 14, 2008 Share Posted November 14, 2008 (edited) 1992 R32 GTS-T RB20DET (Stock internals) 165 000km HKS GT2530 on 14psi Bosch 023 Sard Fuel Reg Stock Injectors Stock ECU FMIC Pod Oil Cooler 3" turbo back exhaust 272hp Now with tune!!! RB20DET (Stock internals) 170 XXXkm Splitfire Coilpacks HKS GT2530 on 18psi Bosch 023 Sard Fuel Reg Sard 550cc Injectors Apexi Power FC Z32 AFM FMIC Pod Oil Cooler 3" turbo back exhaust 301hp/224kw @ 18psi Green Line - is my first dyno 272hp @ 14 psi Purple Line - 301hp @ 18psi Big 60-70 hp jump in the mid range Edited November 14, 2008 by 45LDE Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4260570 Share on other sites More sharing options...
soft32 Posted November 18, 2008 Share Posted November 18, 2008 1993 r32 gts-t rb 20 (stock internals) 130, xxx k's Garrett 28-71 turbo on 17psi Walbro pump HKS cooler splitfire coils Sard 550cc inj POD Power FC Z32 AFM Full 3" custom made exhaust Made 228rwkw's (306 hp approx) on boost work dyno Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4268106 Share on other sites More sharing options...
nissanmagic Posted November 18, 2008 Share Posted November 18, 2008 1989 cefiro rb20det 125k's stock turbo pod filter front mount cooler walbro intank pump 3in exhaust from turbo remap ecu by speed lab makes 169.2kw atw on 14psi with regular unleaded Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4268565 Share on other sites More sharing options...
Benji Posted November 20, 2008 Share Posted November 20, 2008 Rb20 powered s13.5 - Un-Opened 9X,XXXkms RB20DET motor, - Hypergear TR34 440hp ext gated. - Tuned Length High Mount Manifold - SARD INJECTORS.... - a fair bit more..... go to my link in signature for all mods..cbf em' typing all haha! made 227rwkw on 17psi, with ext gate problem...and coilpacks shitting themselves...so should make more than that with new gate setup and my new packs ive got in on same psi.. but since then has been re-tuned to 14psi, while I get a new gate so I can run some more boost etc... and made 210rwkw on 14psi.. will keep SAU updated on what happens... Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4274118 Share on other sites More sharing options...
KURAUN Posted November 24, 2008 Share Posted November 24, 2008 update on mine had apexi cam gears installed and gizmo ebc Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4279547 Share on other sites More sharing options...
hugwase Posted November 30, 2008 Share Posted November 30, 2008 (edited) Delete Edited November 30, 2008 by hugwase Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/11/#findComment-4292395 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now