Jump to content
SAU Community

Recommended Posts

im sure theres ways around it? as other cars comming out of japan have full size tyres, but I guess at the time of manufacting Skylines they wouldnt imagine ppl would be using them for other purposes???

Otherwise they could have easily took off weight else where or add more KWs to compensate for the extra weight.

Whole boot is small anyway extra size in diameter where the spare goes won't make a difference

Weather its because of money or other reasons, theres no win win out of it as ppl cant put 18s or 17s in there boot i guess?

have u got a skyline? and have you ever tryed fitting a 17 or 18 siezed rim and tyre in you boot? only way to do it ( and its a hard, frustrating, pos way ), is to tilt it sideways n squeeze the bitch in till it fits... snuggly mind you....you could carry your spare around like that, just dont intend on puttin anythin else in the boot with it lol

Space savers are freakin heay for the size they are... How often do you get a punture in normal driving conditions? Like once every 3 years. Pfft. Not worth the weight in my opinion. Just get one of your mates to drop a spare off for you.

And they are called space savers for a reason.. :D

Mark actually its the location of the weight that can make the diff. I'm sure it was the case of space for the skyline but that 2 or so kilos after the rear axle in the rear driver could make it harder to control in an oversteer situation. Keep in mind that the skyline was soley developed to go racing so they weren't worried how small the boot was.

Anyway as I said in most modern road cars (take bmw's for example) the engineers do't have the room to put in a full spare....people wan't bigger boots/larger interiors etc.

The reason for the space saver is that you had to have a spare wheel to get the design certified for road compliance - hence they went for the smallest one they could find.

It took years for Mercedes to get the 'no spare wheel; thing through as they have on their SLK - which comes with one of those 'repair in a can' things I believe.

Just another example of regulations not keeping up with technology.

yeah heaps of the expensive luxery cars do not have spares anymore, if u can afford a 200 grand car i dont think your be changing your tyres urself.

plus theres always road side assist, just tell them u got a flat and u havent got a spare, they will either bring u a full size spare or tow your car to nearest servo to get a new tyre.

yeh i ditched my space saver for a number of reasons,

the stereo in the boot

i have road side assitance anyway so if its that bad i can get a tow

and with 19x10s all round with a 15x125 push bike wheel i wouldnt feel too safe

ben...

i wouldnt want to be driving on spacesavers anyway. they'll probably puncture by the time i get home not to mention driving in the rain. just call road side assist or a friend to drop you off a tyre. id rather cause a little racket then cause a huge racket when my car wraps itself around a pole

in my case its not really driver attitude, ie. like its not like i always fang the car, ive driven once with the car with a space saver on the rear, and for me it was pretty damn scary, the car felt so unstable and with 350+rwkw its not my idea of fun,

ben...

space saver are there to save money. what bout some of the newer medium size and family cars that are coming with spacesavers? i also remember an article in the royal auto (racv mag for members) that they were not happy with the inclusion of a spacesaver in a smaller car, could have been a focus? and there was room for a full size spare, yet they put a spacesaver in.

The lotus elise dont have a spare as there is bugger all room, not even for a spacesaver. so they have one of those tyre foam thingys.

WTF?

If you want a proper tyre go get another chromey and put it in your boot. Otherwise I'll stick to my spacesaver for getting me to the servo if I get a flat. I mean really you shouldn't go fast or have it on the back.

If you puncture a rear tyre and you have a mech diff remember to take off a front wheel, put it on the rear and then put the spacesaver on the front so as not to kill your diff.

Also for the guy who said he has 350rwkw and didn't like the space saver... well.. That's to be expected but you don't have to use it, you can just leave it at home and get a mate.. I'm assuming it got you where you wanted to go.. what's the problem? They're not meant to be driven on for normal use.

Decepticon - is this thread to whinge that you have to take out the space saver if you don't want to use it?

had to use my space saver on the weekend, didnt go over 60 the whole time, from castle hill to windsor to get my tyre fixed, I dont think the ppl behind me were to happy, but im sure they could see the space saver was on there. For what it was intended for its fine..

not like I was taking corners hard, or even hitting boost with the thing on there.

I remember that story kruger and I think it was a focus. The spare was situated under the boot floor and was wide enough and deep enough for a normal spare but they chose a space saver.

They also did a braking test with it on which was obviously a longer distance. There was also mention that in some small cars the spare tyre well was part of the crumple zone or something?

someonestolecc: Can you tell me why the space saver on the rear of a mech diff would cause damage? I would never had thought twice about it untill you have mentioned it and now I am curious.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...