Jump to content
SAU Community

Recommended Posts

im sure theres ways around it? as other cars comming out of japan have full size tyres, but I guess at the time of manufacting Skylines they wouldnt imagine ppl would be using them for other purposes???

Otherwise they could have easily took off weight else where or add more KWs to compensate for the extra weight.

Whole boot is small anyway extra size in diameter where the spare goes won't make a difference

Weather its because of money or other reasons, theres no win win out of it as ppl cant put 18s or 17s in there boot i guess?

have u got a skyline? and have you ever tryed fitting a 17 or 18 siezed rim and tyre in you boot? only way to do it ( and its a hard, frustrating, pos way ), is to tilt it sideways n squeeze the bitch in till it fits... snuggly mind you....you could carry your spare around like that, just dont intend on puttin anythin else in the boot with it lol

Space savers are freakin heay for the size they are... How often do you get a punture in normal driving conditions? Like once every 3 years. Pfft. Not worth the weight in my opinion. Just get one of your mates to drop a spare off for you.

And they are called space savers for a reason.. :D

Mark actually its the location of the weight that can make the diff. I'm sure it was the case of space for the skyline but that 2 or so kilos after the rear axle in the rear driver could make it harder to control in an oversteer situation. Keep in mind that the skyline was soley developed to go racing so they weren't worried how small the boot was.

Anyway as I said in most modern road cars (take bmw's for example) the engineers do't have the room to put in a full spare....people wan't bigger boots/larger interiors etc.

The reason for the space saver is that you had to have a spare wheel to get the design certified for road compliance - hence they went for the smallest one they could find.

It took years for Mercedes to get the 'no spare wheel; thing through as they have on their SLK - which comes with one of those 'repair in a can' things I believe.

Just another example of regulations not keeping up with technology.

yeah heaps of the expensive luxery cars do not have spares anymore, if u can afford a 200 grand car i dont think your be changing your tyres urself.

plus theres always road side assist, just tell them u got a flat and u havent got a spare, they will either bring u a full size spare or tow your car to nearest servo to get a new tyre.

yeh i ditched my space saver for a number of reasons,

the stereo in the boot

i have road side assitance anyway so if its that bad i can get a tow

and with 19x10s all round with a 15x125 push bike wheel i wouldnt feel too safe

ben...

i wouldnt want to be driving on spacesavers anyway. they'll probably puncture by the time i get home not to mention driving in the rain. just call road side assist or a friend to drop you off a tyre. id rather cause a little racket then cause a huge racket when my car wraps itself around a pole

in my case its not really driver attitude, ie. like its not like i always fang the car, ive driven once with the car with a space saver on the rear, and for me it was pretty damn scary, the car felt so unstable and with 350+rwkw its not my idea of fun,

ben...

space saver are there to save money. what bout some of the newer medium size and family cars that are coming with spacesavers? i also remember an article in the royal auto (racv mag for members) that they were not happy with the inclusion of a spacesaver in a smaller car, could have been a focus? and there was room for a full size spare, yet they put a spacesaver in.

The lotus elise dont have a spare as there is bugger all room, not even for a spacesaver. so they have one of those tyre foam thingys.

WTF?

If you want a proper tyre go get another chromey and put it in your boot. Otherwise I'll stick to my spacesaver for getting me to the servo if I get a flat. I mean really you shouldn't go fast or have it on the back.

If you puncture a rear tyre and you have a mech diff remember to take off a front wheel, put it on the rear and then put the spacesaver on the front so as not to kill your diff.

Also for the guy who said he has 350rwkw and didn't like the space saver... well.. That's to be expected but you don't have to use it, you can just leave it at home and get a mate.. I'm assuming it got you where you wanted to go.. what's the problem? They're not meant to be driven on for normal use.

Decepticon - is this thread to whinge that you have to take out the space saver if you don't want to use it?

had to use my space saver on the weekend, didnt go over 60 the whole time, from castle hill to windsor to get my tyre fixed, I dont think the ppl behind me were to happy, but im sure they could see the space saver was on there. For what it was intended for its fine..

not like I was taking corners hard, or even hitting boost with the thing on there.

I remember that story kruger and I think it was a focus. The spare was situated under the boot floor and was wide enough and deep enough for a normal spare but they chose a space saver.

They also did a braking test with it on which was obviously a longer distance. There was also mention that in some small cars the spare tyre well was part of the crumple zone or something?

someonestolecc: Can you tell me why the space saver on the rear of a mech diff would cause damage? I would never had thought twice about it untill you have mentioned it and now I am curious.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...