Jump to content
SAU Community

Recommended Posts

So i take it you arent going to DECA then?? you should do the box change over and see if it keeps staying engaged, then cancel deca. it may sort itself out with the chance over... glimmer of hope for ya.. Im free thursday too if ya go through with it

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Well, not sure at this stage...

Thanks for the offer Ryan. From what I've been told, if it doesn't fix the problem, the car will still drive fine, but I have a higher chance of smashing this box aswell, which I can't afford to do right now, not for the next 3 months or so that is, so I don't know if I want to risk it.

I also don't want all you guys to bust your balls for me on a whim if you know what I mean, I'd just feel bad about it...

If your clutch is a bit ???? and your rear main seal a bit ???? then i would be waiting and doign it all properly.

What exactly is wrong with the clutch that means its not disengaging? I dont know but that sounds to be an adjustment thing ????

But do it right, missing a DECA sux but you do have a back up car or two :P

Buy a new clutch. Rebuild the old clutch later and sell it off as a rebuilt clutch.

The extreme clutch supplier dude that me and Al have used will deliver next day.

Wack the new clutch and BOX in on thu night and bob's my dad.

Don't worry about the time taken to do it. As Ash said, it wont take all night.

Is it currently a twin plate?

I will also be available for Thursday night, so i will give Dave a call on Thursday to get an update.

On a another note, i may have to pull my car out of DECA :D.

Went for a drive on the weekend and was hearing a deep winding noise from the engine bay, at idle. Tracked it down to behind the cam covers. Will be taking the car to my mechanic tommorrow to have a listen, if he knows all is ok, then no problem, but if he suspects a fault then i will pull out :(. I was so pumped up for this event :ermm:

Either way i will still come up!

Anyone got a spare 33 i can borrow? ;)

heh, i may still have my old clutch layin round, but i doubt you would want to do that, especially at deca. the only good thing is your gearbox wont be hurt in the slightest as it will probably never fully engage with all the clutch dumping. as for putting everyone out i think we see it as something to do!!! would be a bit of fun;)

Daneeeee

Im more than happy to give ya a hand with all this, and even if its the clutch, we can look at it with the box off, its the best time for it.

its for free dude, you might as well give it a try and see if its worth it.

Cheers

Sean.

Troy: I'm not sure exactly what makes it not disengage fully, but it's something to do with a few stress fractures I have in the clutch plates. I've been strongly advised not to put another box in without fixing it. In their words the clutch is 'f**ked!'

Chris: Yeah, it's currently a twin plate OS. Just buying another clutch would be the easy option, I work right next to EXEDY, but I simply can't afford it at the moment. I just put a fair amount of money into it last week...

Ryan: Thanks man, appreciate the offer dude!

Sean: thanks man, why is it always you that ends up fixing my car?? :D haha

Realistically, I think the only way to get it to DECA is to put another clutch into it, whether that be a secondhand one I can borrow, or a new one, which is just not an option at this stage...

ahhhhhh well...

I've just pulled out of DECA...

Thanks for the offers guys, much appreciated, but I should just do it once and do it properley with a rebuilt clutch I think.

:)

no one else will say it, but im a kent so its ok....few more withdrawals and we can double our pan time!

oh yeh, bad luck with the car :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...