Jump to content
SAU Community

Recommended Posts

Thanks for that. Not sure what to do with the rear seat whether I shoudl cover it in marine carpet or just leave it bare. Same goes for the roof too. Any more shots guys?

Cheers!

Here's a shot of my hks cage with the rear seats in place before painting it, was thinking the same as you should I put carpet or seat back in.

p1020565.jpg

A friend of mine like they head lights you have...

GTS-T light but you painted the surroundings of the lens?

Yeah painted with clear lenses

Get in touch with Risking in the fabrication settion. he is away at the moment. He does about the best half cage you can get. I had a Brown Davis, looked at Bond etc and his cage fits the pillars far tighter and are better made. Not to say the other companies cant do a similar job, but for the money Risking does give you more cage and better quality for what others generally charge a little more. But more then that they are just well made and engineered cages. He is in Sydney but his bolt in cages are all by jig so doesnt need your car to build it if you want to install yourself

Thanks mate, I actually have a half cage installed by Brad, was actually more interested in what people dowith the interior after the cagfe has gone in. My car is completely stripped inside with just a bare metal half cage and seats, so just need some ideas about to what do with all the open space :P

got any shots the back seat area?

not at the moment. not really shot worthy. I have just stripped everything out and taken out the sound deadening

When I am a bit more motivated I will get in there with a heat gun and remove a couple of little bits of stray sound deadening and just tidy some wires that go into the boot and spray the whole area black

I remember in an old SPEED mag, there was an R32 with the number plate "R32" which was basically the inspiration behind what I'm doing with my car. Does anyone know the car or have pics from that mag?

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...