Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 4 weeks later...

Thanks guys!! Yeh, Grill is Dolphin, and front bar is genuine aero with the black inserts. The rest of the bodykit is from "Stage 21" Japan - sourced through IM. I think it is just referred to as "Stage 21 Bodykit". I really wanted the rest of the genuine aero kit at the time but couldn't find them anywhere, so opted for this. These are actually add-ons to the standard bars & sideskirts with a few modifications to make them sit right, but one the whole it turned out pretty good :) The rims are 19" Speedy Calibre's and exhaust is the 3" Varex muffler with Scott's piping :D

not bad for a phone pic

20130828_173117_RichtoneHDR_zpsb12679dc.

also sorted some gktech spacers (picking them up saturday)

and bought a pair of 17x9 kakimoto n-gt's (+37 unfortunately, hence the spacers)

not bad for a phone pic

20130828_173117_RichtoneHDR_zpsb12679dc.

also sorted some gktech spacers (picking them up saturday)

and bought a pair of 17x9 kakimoto n-gt's (+37 unfortunately, hence the spacers)

Go Team Banana !!!

stoogea.jpg

  • 2 weeks later...

what size wheels and tyres have you got set up there? looks about the same as I want to get on mine just having trouble finding style of wheel to match the green paint nicely

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...