Jump to content
SAU Community

Recommended Posts

crank the climate control to like 28 or so... no fog. winnah.

I actually turn the temperature down to get rid of the fog.

Which works better to clear a foggy windscreen, aircon heating up or cooling down?

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

I actually turn the temperature down to get rid of the fog.

Which works better to clear a foggy windscreen, aircon heating up or cooling down?

Cold air.

Think of a milk bottle when you take it out of the fridge. It forms condensation on the OUTSIDE, because the room temperature is much warmer than the cold milk.

Same thing. You get fog on the inside of the windows because it's much warmer inside the car than the cold air outside. Turn on the air conditioning as cold as you can get it to quickly normalise the outside and inside temperature of the glass to get rid of the fog.

Voila :D

both work.

But Cold air works x10 faster than warm air, especially if you have just started the car so the air will be warm at best if you use the heater.

in summary, use cold air :D

exactly !!!

so why is this even a topic of debate?

I've been using cold air to clear up the windscreen since the 80's. lol.

everyone knows it's the best way.

Yep, just what I was going to say. I spit in my dive mask, rub it all over inside of the lens, then rinse in seawater before putting it on.

Note: This may prove impractical for in car use. :D

spit?

I just set the fan to high speed, heater to high, and air source to fresh (not re-circulate). If you have re-cric set, you're just reusing the moisture laden air inside the car (from breath, having just come out of the gym or whatever), fresh brings in the moisture free (as it's cold) air from outside. This clears car within seconds.

Warm air can contain more moisture than cold air, so when the warm air inside the car hits the cold windscreen, it cools down, and can't contain all the moisture it has, so dumps it on the inside of the screen. Blowing hot (fresh) air over the inside warms up the windscreen, and as it's got a low relative humidity (moisture free cool air heated up, can then contain more moisture, so the RH goes down), it also takes up the moisture that is on the screen already. As a bonus, it's warm air so won't freeze your nuts off.

depends on whether the fog is on the inside or the outside. if it is on the outside then it is frost forming and you need hot air to get rid of it. you can spray your wipers but it comes back, except where the water actually hit the windscreen.

if it is on the inside then cold air for a short amount of time. if you leave it on too long you end up getting mist on the outside and have to go hot.

and fog-x is ok, but leaves a film which annoys me. i hate and haze on the windscreen. i don't know how some people drive with a dirty windscreen.

Edited by mad082

When I put my e-tag on the windshield it comes with an isopropyl alcohol wipe to clean the glass before you apply the holder.

I wiped the area around where I mounted it liberally, and it didn't really leave a film or anything on the glass (that I could see).

A few days later when it was pissing down raining, the area I cleaned was the only place where it didn't fog up.

I need to find some place that sells that stuff in bulk for cheap.

Fog-X didn't work for me (I found it fogs up worse) but I might have overapplied it.

charlier34 = from your name im guessin u have r34 or ur description says rb20det, wat car u got ???

i dont think on r32 u can have the air blowing on the windscreen without havin the ac on. but all i do is have the ac on and up the temperature to medium/warm. jus cauz u got the ac on duznt mean u cant set temp to warm so u dont freeeeeze.

u get isoprophyl alcohol from chemists :thumbsup: hope that helps

i didnt know until like 2 weeks ago that demister was onli on the back, lol

that was news to me then i realised my air con was on cold since i bought my car LOL i pay little attention to detail. cold air works a charm ;) just wear lots

of clothes if ur planning to go far

hey guys thx for the responses... i forgot and it is stupid of me for not stating that somehow my air-con doesn't work(maybe it needs a air-con regas, but let assume that air-con doesn't work at all ^_^) :/ haha i guess that explains how this debate popped up... and im pretty sure theres a few cars out there that has this problem to(i think) :thumbsup:

jvs007; i do have an r34... but i haven't edited my details hehe to lazy

A/C de-humidifys the air, thats the main point. If its cold, i chuck the climate control on about 24deg with A/C ON with the vents going to the windscreen, that works pretty quick. Cold A/C works a touch quicker.

  • 2 years later...

while warming up the car, hose the outside of the windows

set air con to OFF but allow it to flow the hot engine air through the feet vents and windscreen vent.

roll with windows slightly down(doesn't bother me as im a smoker)

rug up!

That's all i ever use the air con for.

I hate that No-Fog/Fog-X/Never Fog stuff, because it leaves an oily film on the windscreen that makes it look dirty and hazey in the sunlight... and if you wipe all of the oily stuff off, then you've just wiped off the product and it does sh1t-all!

I find just keeping the inside of the windscreen PERFECTLY clean and spotless is the best option. Then 10 seconds with a blast of hot air demists it quick as a flash! When your windscreen is dirty though, it takes AGES to demist the glass.

Absolutely agree with everything Merli said

Keep it very clean, and you are less likely to have the problem.

Also the RainEx AntiFog stuff is crap as mentioned, I put it on, then took it all off again, just became smeared everywhere.

It is also about keeping the inside of the car dry where possible. So leave umbrellas etc in the boot and anything else that is wet. I occasionally put a tub of those moisture absorbing things in the car overnight over a few days. It sucks up all the moisture in the air and converts it to water in a tub. You can buy it from the supermarket. It helps, especially when the air is very humid in the car, and moisture is attached to your carpet, seats etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...