Jump to content
SAU Community

Removing Broken Bolts

NICKS33

By NICKS33,
in Engines & Forced Induction

 Share

Recommended Posts

NICKS33 Collaborator

NICKS33

Posted
Posted

did a search but nothing usefull came up...

i heard there is someone you can call that comes round to ur house to get them out for you???

its a broken bolt in the back of the turbo...one of the ones that holds the dump pipe on...

dont trust myself with easyouts so i dont wanna try them just yet incase i break one...

cheers, nick

Link to comment
https://www.sau.com.au/forums/topic/127906-removing-broken-bolts/
Share on other sites
TurboX Mentor

TurboX

Posted
Posted

If you remove the turbo you will probably find it will be easier to remove the broken section after soaking in wd40 or similar and griping the extended part at the back of the flange? Maybe..? :laugh:

r33_racer Grand Master

r33_racer

Posted
Posted

easy out it...piece of piss mate. You wont get any skills unless you start giving things ago yourself. Watching someone else do it helps, but you gotta get that mechanical/engineering 'feel' inorder to be half good at these things. That means practice :wub: or forever be paying someone else to do stuff for you :laugh:

grim32 Community Regular

grim32

Posted
Posted
did a search but nothing usefull came up...

i heard there is someone you can call that comes round to ur house to get them out for you???

its a broken bolt in the back of the turbo...one of the ones that holds the dump pipe on...

dont trust myself with easyouts so i dont wanna try them just yet incase i break one...

cheers, nick

threadweld 0418246531 is the guy i used, it was a while ago but. On a positive note he works magic cause i left him with a mess and he done it no sweat

GTROB Collaborator

GTROB

Posted
Posted

Don't go any where near it with a easy out mate, if you have never used one. If you break a easy out off in there then you are screwed. The material that easy out's are made of is REAL hard and you will have a hell of a time trying to get it out. Trust me I know from experience.

fritter Contributor

fritter

Posted
Posted

Do it urself. sprey wd40 or penetrene. let it soak for an hour or two and then use the largest drill you can safely use without threat of hitting your threads. best to use a pin puch to mark your drill point so drill will stay in centre. use the biggest possible easy out and make sure you buy the good brand and not cheap shit from the local $2 shop. Make sure you tap the easy out hard on the head to seat the easy out and also to shock to metal thread around the bolt you are trynig to remove. It really is an easy job and at the end of the day if you cant do it or you wreck it, THEN call someone to do it. Dont be scared to try as you are already in a position where you are thinking of calling someone. At the end of the day if you stuff it all up, you will still be in the same position you were in to start with ( i.e. having to call someone). SO give it a go. Nothing like working with your hands n building shit to fully appreciate being a man with skills, not a boy with a wallet.

fritter Contributor

fritter

Posted
Posted

oh and if you do snap it off dont worry. and good mech will have super hardened drill bits to drill the easy-out out and if you stuff the threads there are helicoils ( thread inserts to bring slogged out holes/threads back to their original sizes. To many pussy boys in here to scared or stupid to get their hands dirty.......

GTROB Collaborator

GTROB

Posted
Posted
oh and if you do snap it off dont worry. and good mech will have super hardened drill bits to drill the easy-out out and if you stuff the threads there are helicoils ( thread inserts to bring slogged out holes/threads back to their original sizes. To many pussy boys in here to scared or stupid to get their hands dirty.......

Have you ever tried to drill a broken easy out??? You can't. Super hard drill bit ??? Diamond and tungsten tip drill bit dont even touch them.

dontfeelcold Experienced

dontfeelcold

Posted
Posted

its safer to drill it out and then knock out the threads. if the head of the bolt/stud has sheared off due to the bolt/stud being locked in there really tight then there is a chance the easy out could brake.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...