Jump to content
SAU Community

Recommended Posts

Hi Guys,

I'm interested to have mine fasted, because it appears to be series 2 (air bags, kit, lights, etc), but is listed as a 1994 on the compliance plate and id like to know if something dodgy happened with the import/compliance.

VIN : ER33-013878

Thanks

Hi Guys,

I'm looking at a car for sale and i would like to know the original details, i.e. colour, options and what model it is. I also have the engine number, can you check that in the fast program too?

BNR32301203

ENG RB26033674A

Thanks in advance guys :(

** Also, can anyone tell me what the K or 2K means in the bottom left window? :)

Edited by MaTBoY
can someone please look up 6T91MPV97PZWYW001

Thats the aussie compliance number. You need to provide the Japanese VIN code, eg HCR32..., ECR33... etc

BNR32301203

Here you go

post-24887-1183509662_thumb.jpg

Model Series: R32

Build Date: 9303 (which is March 1993)

Colour = 326 (which is Crystal White)

2K = 2 door coupe

Engine = RB26DETT

Series = GT-R.17

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
×
×
  • Create New...