Jump to content
SAU Community

Recommended Posts

Yeh but the trick is actually being able to safely push the stock car to the limit and be able to hold it there all the time, rather then always pushing it over the limit and losing time. A modded car is alot easy to drive and hold near the limit so to say as its been built to do that.

Did you read my post?? I said nothing about being over the limit. Modding the car will do nothing to help you drive it near it's limits. It will...if done correctly..just raise the level of those limits.

My point was you don't actually have to do anything to an R32 or 33 GT except upgrade the brakepads in order to enjoy a track day.

The GTR of course is another story alltogether. :(

Yes i know what you said.

"If you can drive a stock GTST to it's limmit you will be quicker than a lot of modded cars and a few GTRs.....Have fun with YOUR car"

And i was saying that it will be harder to push a std gtst then a modded one, with good driver ability or without it. You are all for the just drive for fun thing, not being competitive or anything like that then thats fine, but most people have modified cars and like to modify them so they can go faster and be more competitive whilst still having fun if not more fun then when the car was std.

I wasnt attacking your post, i was just saying that a modified car will be easier to do say a flat 60 around the sprint track with only driving at say 70% of your ability, with room for a quicker time as the ability and effort goes up. Where say a std gtst you would be hanging on the edge of that ability, the cars and your own to make that flat 60. Because you would be near that limit so often, mistakes are bound to happen.

I apologise if you took my post the wrong way, i was actually pissed this morning when i wrote that haha. But everyone is different, you like to just go out for fun and have fun just in the fact your actually racing around the track with basic car mods which is kewl, or people like me who like to go out and be competitive and have fun. Eitherway were all still having fun right?

Hopefully next qld 500 i will see you out there mate. Hope you accept my apology, i dont want any shitfights with fellow nissan drivers/racers :(

Hi guys, great thread about track day. I want to answer the question about overtaking.

The number one prioirty on the day is everyone's safety. So when someone is doing an overtake I would like to see the following:

1. Leading driver is aware of following car. i.e. Uses mirrors.

2. Following driver flashes head lights to indicate desire to overtake.

3. Leading driver indicates what side to overtake to following car.

4. Following car proceeds to overtake.

5. Leading car holds line and backs off to ensure overtake is finished before the next corner.

One thing to be aware of is occasionally someone in front will be faster in the straight and slower through all the corners. The temptation is to shoot off down the straight and hold up the following car for another lap of corners. The better thing to do is to acknowledge the following car is quicker in corners and let it pass on the next straight.

Generally everyone does the right thing and the days runs great. If someone doesn't do the right thing, it is usually because of enthusiasm and is not intentional. Don't get mad, have a polite word or get me to have a chat.

With the grouping on the day, I have lap data on most drivers, so the sessions are organised by performance. Doing this reduces the difference between the cars and there is less overtaking. Our smaller numbers also makes for clearer track.

Paul

cool, thanks for the clearing that up mountain runner. I think from a noobies perspective like mine there's alot to think about but when your on the track driving it'll pretty much all be common sense anyway.

Paul two questions...

First question:

3. Leading driver indicates what side to overtake to following car.

So if Im going down the strait and Im keeping left so i want them to overtake on the right that means I indicate RIGHT while stay left? (just to clarify)

(almost witnessed a crash on the road once because of such a confusion)

Second Question:

What do I have to do if I want to come to a track day?

Edited by ZENNON

ah! back in Bris again

r33 racer....nothing to apologise about, if we all had the same point of view there,d be nothing

to talk about.

I'm not anti engine mods,in fact mine are all planned out. I'm just seeing how far we can go with

lightening the car and setting up suspension and brakes.

Track days are not in fact race days...if you want to race you need to go Sundays :laugh:

Having a faster and better handling car will usually get you round the track quickerbut doesn,t

mean you'r a better driver...but enough of this.

The point I was trying to make was, people post all the time saying they are dieing to get out

to a track day but there car is "only" a stocky or they'r waiting until they get this done or that done

They could be out there driving the car they've got and seeing their times go down as they get practice in

and add mods to their car.

Anyway when we're out there come and say hello.....I'm the grumpy old geezer with a white R33 "Mum's Car"

thats why i have not been to any of those track days.

i am dying to go, but i have never been on one, and i might hold everyone up. is there any chance ppl can go on with instructors??

You should came out Frank!! even if it is just for a look!

i will do that mate. I know and agree with what your saying people shouldnt wait till all the mods they can do are done before they go out and have some fun. I took the point about the stock car being quicker then a lightly modded car as the main point there and focused on that. Anyway i know its not a race, only a time race.

thats why i have not been to any of those track days.

i am dying to go, but i have never been on one, and i might hold everyone up. is there any chance ppl can go on with instructors??

No to the instructor question. Perhaps you could book one of Paul's passenger ride sessions and take someone who knows around the track. Best thing would be to pay for an advanced driver course.

There is a first time for everyone, you may not be as slow as you think :) just let faster cars past on the straights. you will probably be on track with people doing similar times to you.

The main thing is to get out there and enjoy driving your car and the company of like minded people

thats why i have not been to any of those track days.

i am dying to go, but i have never been on one, and i might hold everyone up. is there any chance ppl can go on with instructors??

Don't worry about holding people up. The days are organsied so that people of similar times are on the track together. You may start off in a group that is slightly faster or slower than you. This is generally corrected by shifting you into a more suitable group after your first run. There is overtaking, but in reality is is not overly common. If the groups are set right, everyone - irrespective of what they are driving, will be doing fairly similar times. Once you start getting used to it, chasing and being chased are the best parts - tends to make you drive a little harder.

I know a few people who also say "I'll look like an idiot if my times are too slow".

It's definitely not the case. Everyone who goes out has to start somewhere. It is understood and encouraged.

Go and have a run. You'll love it.

thats why i have not been to any of those track days.

i am dying to go, but i have never been on one, and i might hold everyone up.

Dont worry about it!! :kiss: Ive never been out there (driving) and Im keen as a bean!

And im bound to hold people up - since i dont know the track (know the layout but have never raced on it) and dont know my car very well (have only had it for a couple of weeks now)

Theyll put all us slow people together and itll be fine! :)

Hey Guys. As maccattack said, I group everyone based on their lap times. If you are new and want to be in a slower group just let me know and its all good.

All the guys who come out are really friendly and easy to talk too. No one gets embarressed or made fun of because of lap times. Encouragement and good advice is on offer.

I personally have run heaps of track days but have only driven 4 laps on the Sprint and 4 on the clubman in TOTAL at QR. I have been hampered by endless car troubles. These are now almost sorted and I'll be checking myself into the newbie group and looking for advice from the likes of our Group 1 guys.

Paul

You should come along to the nov track day so you can see whats going on...

Once you see us flying round and burning rubber you will be keen as mustard to be in the next event...

Plus we need SAU members to come and take photos for us who are driving and we need support...

GTRs can never have enough cooling, even with a TRUST 16row oil cooler and 57mm PWR radiator my old car used to see quite high oil temps and its was quite stock power wise.

Hopefully the new GTST should be seing similiar times to the old GTR next year. Can't wait for the cooler months next year!

  • 10 months later...

The first time I went I was in the 2nd or 3rd group - I was watching the first group do their laps and I was terrified at how fast they were going.

Once I got out there I had an absolute ball - sure I was over taken, but it was the best fun I've ever had driving (including the drags and the hill climb at Mount Cotton).

I can't wait for the next day on 23 Aug 07.

My tips:

- take a folding chair and a hat, and if it's hot you'll want shorts and a t-shirt to get into in between sessions (long pants/long sleeves are required for the circuit)

- as per a previous post, take lunch and water. The Skyline club had a bar-b-que last time which was great, but I get hungry early.

- take a tyre pressure gauge, and measure your pressures before and after each run - I found 36 cold/39 hot to be the best for my car (R33 GTST) - and don't trust the gauge on the air hose behind the pits- it reads too low

- try not to change gears near the rev limiter all day, changing gears at 6000 rpm puts a lot less stress on your engine that 7000 rpm - you want to drive home.

- take fuel if you can, but I nearly went through 2 tanks for morning and afternoon sessions, so I ducked down the road about 5 minutes for a full tank at lunch time

- have fun

- take it easy driving home -it feels very slow

cheers,

Mike

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Block bump. $400. As above cyl 6 needs bore or sleeve.
    • I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...