Jump to content
SAU Community

Recommended Posts

Hi pressure dosent work your paint ! Its usualy the FOAMING BRUSH CONTAMINATED...

just take a bucket and new spounge to substitute at the coin OP ...

i never use the brush..?

my car comes up clean..

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

those foaming brushes cane the f**k out of your car i used one and 3 months later still had swirl marks

high preasure soap and high presure rinse is the way to go.

pitty it doesnt get out dints, a f**ked roof and winscreen =)

i never use the brush..?

my car comes up clean..

That brush leaves marks and scratches. Imagine some dirty 4wd being washed, leaving pebbles and mud inside the bristles, then you drive up and run that same brush on your car... Ive washed my brother's commodore there for ages and the paint now sucks... Also when you swing that brush around it can leave dents in your paint...

I think im gonna get those karcher things and use that... I heard they go for 90 bucks...

Edited by Sir-D

here's a simple trick. wash the brush out before you use it. just get the high pressure spray and give the brush a quick spray before you use it. and if you do get any tiny scratches, a cut and polish will get rid of most of them.

and gympie (home of qld's proposed mega dam) FTW. our dam is at 82%. we had water restrictions a few years ago (while noosa kept using our water without restrictions)

TIP: if your going to wash it at a car wash go there and put $1 in and rinse the car and fill up a bucket then grab sponge and wash ur car by hand (as you are allowed to do this only mon-frid) then put in another dollar and rinse of all the soap then give it a chamois..

those brushes leave scratch marks all over the paint, and within months you will notice your paint looks like rubbish.

lol - i did the whole bucket and chamoise thing during the day, then got to talking to another customer who said that he was told off when the guy saw him use the bucket and sponge....

its a stupid rule i reckon that we have to use that stupid brush - wonder if there are any other car washes that allow the use of sponge and bucket

I dont like those auto washes cos they scratch your car

As stated several times, this is a myth.

Common sense (and the notices around the car wash) tell you to rinse the brush prior to use... you have to assume that the person who used it before you filled it up with dirt and small stones.

If you're still not happy with that, use a laser wash.

$7~ and NOTHING touches the car.

Apparently you can use some "gerney" machine to wash your car at home... any details?

Info and reviews here:

http://www.skylinesaustralia.com/forums/in...showtopic=52668

Worth a read, I would not recommend most of the "popular" brands, because they have plastic components in their motors, and need to be repaired so often that it's just not funny.

"Alto" FTW. :(

Won't stop me washing my car, smack in my driveway, in full public view with the hose....

I have a water tank that basically, we struggle to keep room in!

When the rest of Australia runs out of water, we'll all come stay at your place.

Unfortunately water tanks aren't an option for a lot of people.

As odd as it sounds, local laws prohibit the use of water tanks in the city I live in.

You aren't allowed to take water from the sky, even if it falls on your property.

(Probably something to do with the council not being able to charge maximum $$ for sewerage disposal if they can't measure exactly how much water has passed through your property)

....and for the people who live in places which do permit water tanks, the tank water can only be used for washing vehicles if the tank is a stand alone system.

People who say they are just going to ignore the restrictions need a kick in the throat. Their there for a reason so that we can live. The next step should mass production of water recycling plants around Australia. As for the vote not to build a water recycling plant in Toowoomba or where ever it was, those towns people who voted no also need there heads kicked in, saying no just becuase you dont want to be the first to do it is the most rediculous excuse ever.

The restrictions are there for a reason so abide by them. If it means your car wont be washed every week then who cares no one needs there car washed every weekand a couple of buckets worth of water is plenty to do a good job. The question some people need to ask themselves is do you want a clean car or do you want water?

End Rant :(

there really needs to be desalination plants built all around australia, as we cant keep relying on water restictions and the hope of rain to fix our water problem, desalination plants would be a good investment as our population grows we cant forever live on water restrictions, damn it, i want to be able to buy a pool and fill it. :(

washed my skyline the yesterday at the car wash, about $4 gets the job done, and how does high pressure water scratch your car??

Waterless car wash FTW!!

I can get this really good stuff for $12 a bottle.. and it works a treat!

I didn't think the stuff was any good, but after washing my whole car with it... i was extremely happy with the results!! It was as good as a polish!

Waterless car wash FTW!!

I can get this really good stuff for $12 a bottle.. and it works a treat!

I didn't think the stuff was any good, but after washing my whole car with it... i was extremely happy with the results!! It was as good as a polish!

I was going to say the same thing...

There is this stuff that porsche owners use and basically all you need is a chamois and a bucket of water

Stuff wont ruin paint as it is organic (the guy who was selling it actually licked it to prove that it was non-toxic/organic)

its called MAGIC WASH 4

let me know if anyone wants any and I will hit him up.

It is a local cairns company, but the stuff does work.... I use it on my car (and it is black) and it comes up just awesome...

usually though it takes 2 buckets of water to finish ot properly.....

prices are $10 for a litre and $33 for 5 litres....

the guy who owns the company has a 2004 porsche turbo and he only ever uses this to wash his car.. and it always looks great.

PM if anyone is inerested and I will pass on the details :(

Some people are such whingers. IMHO people should be allowed to wash their cars more than once every 2-3 months. Any more than that is just greedy.

This country is pretty much stuffed in terms of water.. Desalinisation might have to be part of the solution but it isnt a good one.

The desal plants use heaps of electricity, more electricity, more pollution, more greenhouse gasses, less rain, less water....

people just need to use less, queensland needs to stop farming rice and cotton, irrigated agriculture needs to be heavily reduced.

Apparently it takes 600 litres of water to make 1kg of rice in QLD.

Here in Vic 20% of our whole states water usage is farmers irrigating grass to grow cows on!! melbourne only uses 20% itself.

lol - i did the whole bucket and chamoise thing during the day, then got to talking to another customer who said that he was told off when the guy saw him use the bucket and sponge....

its a stupid rule i reckon that we have to use that stupid brush - wonder if there are any other car washes that allow the use of sponge and bucket

They make you pay 15 bucks for hand wash at my local car wash... f**k that.

Ill use mr crusts tips... haha! Im gonna sneak in and wash my car after 11 pm when there is no one there but Mr kebab man!

taken from: http://www.melbourne.vic.gov.au/info.cfm?top=120&pg=997

Summary of Melbourne's Water Restrictions

The water restrictions as of 1 September 2006 includes:

- wash vehicles with a bucket - pre-rinse and rinse only with hand-held hose fitted with a trigger nozzle

Is everyone saying that this is going to change from November onwards? I cannot seem to find any information if it is changing.

Otherwise the above is fine for washing your car.

Is everyone saying that this is going to change from November onwards? I cannot seem to find any information if it is changing.

Here you go.

New Stage 2 water restrictions

Hoses cannot be used to wash cars at any time. Cars can only be washed using a bucket which is filled directly from a tap, high-pressure cleaning device or commercial car wash.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
    • Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...