Jump to content
SAU Community

Recommended Posts

Hello,

Ive had my gtt for around three months now and most of the members of my household cannot drive turbo cars. So here i am sitting here thinking why the F*** did i buy a turbo!!

Without selling the entire car, is there any way the turbo can be blocked or taken off so that it runs as a six NA?

If i cannot do this than is anyone interested in trading a Gt-t R34 for the NA four door :)

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/142130-de-turboing-an-r34-gt-t/
Share on other sites

no it is still classified as a turbocharged car, even if you pull the turbocharger off. the compliance plate, rego and papers all will say gtt turbocharged so it wont matter. why cant they drive it? over power the weight rule for their age?

well did u buy the car for them or for you? why do u worry about everyone else in your house so much?

I worry, because there is four of them who cannot drive it...

The four of them are on their P's and in sydney cannot drive her

Im pretty deadset on doing it, but you've just answered my question in one.. thanks

Edited by omgitzandrew

Hey Mate,

Isn't it legal to drive a turbo if it's your "only" family car? Just sign off your other cars to trusted family members (even though they still yours, no one will know) and that way your kids can drive it.

I'm not 100% sure if the family car exemption is still available double check...

Edited by MR R34
dude its your car..... did u pay for it ?

I can totally understand what your saying, but the plus's far outway the minus's .

Yes i paid for it, all $28, 000

Im also not the father of the family, im only ninteen, im refering to my 3 brothers and 1 sister. Yes, its insured

Edited by omgitzandrew

de turboing a skyline is like puttin a gtr engine in a mustang, should never be done yet alone thought of. but i do however understand your predicament, i would do as nizmoid suggested and keep the skyline for yourself :)

Tell them to buy there own f*kkin cars lol. Asif make your car crapper (which you cant do anyways) for them to drive it! You must be a really nice guy to consider that... but no lol

just buy a shitbox for 2k

$500per person

problem solved

Very good idea!

i think i have the solution for you

ill trade u my 1996 hyundai lantra for it - its definately non-turbo - fun for your whole family! i know its not an equal trade so... throw in a few hundred for me too.

I can totally understand what your saying, but the plus's far outway the minus's .

Yes i paid for it, all $28, 000

Im also not the father of the family, im only ninteen, im refering to my 3 brothers and 1 sister. Yes, its insured

if you deturboed the car, would they neccesarily wish to drive it? Aside from diggin into your personal business like everyone else, to de-turbo the car, you would need to transplant in a non-turbo engine, or the essential non-turbo parts from a non-turbo r34 - these are very rare and therefore expensive. You'd probably be best off selling the car, even if you did 'modify' the engine, it may still be registered as turboed, and if not, the car will be 'modified' and possibly therefore illegal anyways.

Edited by SuAvE-1

ok, well the problem with de-turboing a turbo motor is that the internals aren't like a non-turbo motor. they are designed to have less compression (the boost makes up the difference). this means that if you de-turbo it it will have less power than a non-turbo motor.

it would be easier to sell the car and get a non turbo car. to remove the turbo you would have to get a new manifold, block all the turbo water and oil lines lines, get a new exhaust (if it has a 3", since a 3" on a n/a car would be extremely noisey, and actually reduce the power output), and probably retune the computer to alter the timing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...