Jump to content
SAU Community

Recommended Posts

  • Replies 392
  • Created
  • Last Reply

Top Posters In This Topic

Hi,

Recently purchased a 200SX, with some mods done, and wanted to get a dyno run in before i did any more mods to the car. I know it has a SR20DET and not a RB series engine so its cool if I'm not welcome to attend.

Also - just to be extra difficult - I start work at 230pm on the Gold Coast that day... So if its possible to be slotted in before 1pm'ish that would be awesome.

So can I come along?

Side question - cos im a noob and never had a dyno run - do you guys worry about ambient air temps for dyno runs? Like if its a really hot day, you'll only run 14psi instead of 17psi etc.

Edited by Grrr
also ... how do I upgrade the motor where my avatar should be from an RB20E to an SR20DET? :)

hah, i only found this last night after 2 years..haha

go to: my control, then, Edit Profile Information then enter the sr20det in custom member title :)

Hi,

Recently purchased a 200SX, with some mods done, and wanted to get a dyno run in before i did any more mods to the car. I know it has a SR20DET and not a RB series engine so its cool if I'm not welcome to attend.

Also - just to be extra difficult - I start work at 230pm on the Gold Coast that day... So if its possible to be slotted in before 1pm'ish that would be awesome.

So can I come along?

Side question - cos im a noob and never had a dyno run - do you guys worry about ambient air temps for dyno runs? Like if its a really hot day, you'll only run 14psi instead of 17psi etc.

Yes by all means, this is an open dyno day. All makes and models... More than 90% of the cars on the rollers will be skylines, but your more than welcome to come along. Just read the first post and when your happy give us the nod and your in...

As for running early in the day thats not an issue, we will fit you in before 11am so you have plenty of time to take off when needed...

As for the boost setting, you said your car is slightlly modified. At 17psi I hope you have aftermarket fuel management, injectors, z32 afm and an aftermarket turbo... Cause if your running 17psi on any stock components your gonna blow your engine up within 4000-5000km's...

I always say run the boost your management is setup to handle... I wont be turning mine down thats for sure... :)

also ... how do I upgrade the motor where my avatar should be from an RB20E to an SR20DET? :)

Please in future post these sorta questions in the help area of the forum, not in the middle of a dyno day thread... Thanks

hah, i only found this last night after 2 years..haha

go to: my control, then, Edit Profile Information then enter the sr20det in custom member title :(

Thanks Series II...

Awsome! Thanks Col and SAU. :yes:

<--- Thanks SeriesII

As for the boost setting, you said your car is slightlly modified. At 17psi I hope you have aftermarket fuel management, injectors, z32 afm and an aftermarket turbo... Cause if your running 17psi on any stock components your gonna blow your engine up within 4000-5000km's...

Most ill run is 15psi... I was kinda refering to you big boys with your big toys :) Actually 1/2 the reason for wanting the dyno run is before i do something about the engine management.

Please in future post these sorta questions in the help area ...
:happy: sorry.

So yes put me down and ill internet transfer the money on the 1st or 2nd of the month after I get paid.

Edited by Grrr
So yes put me down and ill internet transfer the money on the 1st or 2nd of the month after I get paid.

No worries your in...

Ill note an early run for your car so you can rest assured that your in and out in no time...

Josh has lead a sheltered life...

Geebung/Virginia are no worse for crime that Noosa or the gold coast... The people who live in the area are generally working in the industries based in virginia.

So they are hard working families and yes I would feel comfortable walking through there at night... Its probablly safer than hastings street or cav ave...

No mase required... Just Josh is scared of everything out side Noosa...

You know i'm just playing :happy: I'll give you a hug at the dyno day to make up for my naughty talk of Geebung :)

P.s, speaking of crime, someone broke into my little red swift.... Took the head unit and amp :yes: Damn Noosa and our high crime rate!

Edited by Nismo_Boy
Awsome! Thanks Col and SAU. :(

<--- Thanks SeriesII

haha, thats all good.. i was happy when i found were that change was to.. hated the rb25de, with no T, is there a point..hehehe .. thanx for the shout out in your avatar.. crazy..

hey grrr, are you from the gold coast?, your going right/?, i just need to follow someone, as im to lazy..heheh

Edited by seriesII
hey grrr, are you from the gold coast?, your going right/?, i just need to follow someone, as im to lazy..heheh
Following me is not a problem. I just need to get myself a UHF radio by then...

sweeet thanx..ill pm when we get closer to the date, so i can make sure to get the day off work :(..

uhf radio?, still have the jap am/fm tuner in your car?, i have one if you want it, its just sitting there behind my deck..

uhf radio?, still have the jap am/fm tuner in your car?, i have one if you want it, its just sitting there behind my deck..

dont think you quite understood... he meant a hand held UHF - for talking to other people - sorta like a CB truckies use

ps ill transfer money when a get paid at the end of the month

OK

Time to ramp up the payments people...

2 weeks till the payments close... I have re-done the list on the first page of the thread, remember your spot is not secured until payment is verified by SMR33... First 40 payments are locked in as a 100% run...

dont think you quite understood... he meant a hand held UHF - for talking to other people - sorta like a CB truckies use

ahhh, haha, thanx for clearing that up.. hehe, walkie talkie or 2-ways.. lol... i think i can steal a good pair of my parants, as my dads friend is a cop (shhhhh) and i take thing all the time to use..hehehe. ill try and get a whole bunch of uhf 2 ways.. only for the gold coat ppl.. heheh

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...