Jump to content
SAU Community

Recommended Posts

One of my mates that lives in altona was at home watchin tv when he heard some guy burning up & down his street in a VS SS he is just watchin flying up the street prob goin 120km plus and kinda goes back to watchin tv then all of a sudden hears a massive screech for about 5 sec then a massive crash he looks out his window to see the the VS has ran up the back off a parked car and is doin a runner he goes outside but not quick enough to get the plates all the neighbours go out but noone got the plates then they start looking at the smashed car 2 see the guy has left his front bumper complete with number plate they all couldnt stop laughin it was only someones company car so wasnt too bad but the guy was gonna be in a bit of strife the cops were at the scene for abput 4hrs taking pics measuring things etc so there goes another hoon of our streets and yeeeh it wasnt a skyline jez there is some geese out there :laugh::P

Link to comment
https://www.sau.com.au/forums/topic/154582-funny-story/
Share on other sites

Thats how my laser was destroyed.

Only the chick got out of the car and ran away on foot... Leaving the car behind... i think thats the height of absolute stupidity.

Would have been a long run home back to Rowville for her (where the car was registered) :laugh:

The officers werent too worried about going that night as she probably wouldnt be there for a day or so :sorcerer:

I never did find out if she was charged, one assumes so as insurance wouldnt pay out so she either was convicted or admited doing it!

Link to comment
https://www.sau.com.au/forums/topic/154582-funny-story/#findComment-2875366
Share on other sites

hahahaha

i had similar thing happen out the front of my house about 10 or so years ago neighbor had their car out the front guy pushed a parked car about 50m or so maybe a lil more then tried to crank it over with all of his coolant on the ground let alone the oil and god knows what he hit so hard...

Amazing how ppl just want to run away instead of facing their problems...

Link to comment
https://www.sau.com.au/forums/topic/154582-funny-story/#findComment-2875422
Share on other sites

lolz

these people are stupid

something similar has happened in my area ... only the front bar was on, but the person sorta left a transmission oil track back to their house, which was only a few blocks away ... the driver was also unlicenced ... would suck to be him ...

Link to comment
https://www.sau.com.au/forums/topic/154582-funny-story/#findComment-2875573
Share on other sites

LMFAO! :laugh:

was she blonde?

No idea, it was 4am in the morning when it happened.

The guy in Unit #1 heard it, by the time he got out the front she was high-tailing and about 400mtrs up Dandy Rd.

We all couldnt believe it, not could the Police, she hit 2 cars before mine too. BMW & Commo, so it was a 10k+ bill from thier insurance companies.

Link to comment
https://www.sau.com.au/forums/topic/154582-funny-story/#findComment-2875628
Share on other sites

the things people do ey!..ha

on a similar note i was at cpl today getting a new HD for more porn and a girl on Ps did a 3 point U turn and reversed into a parked saab. gave her a good look to make sure someone saw so she would think twice on doing a runner. she parked the car so i continued into the store thinking she'd do the right thing and leave a note...i dont think she did though as she stood outside a bit scratching her head with her friend then came in the store and joined the line. would be a strange feeling being in the same room as the person whos car you'd just hit.

Link to comment
https://www.sau.com.au/forums/topic/154582-funny-story/#findComment-2877528
Share on other sites

lol where abouts in altona was this?

btw, the same thing happened in my st in altona when i lived there.

one guy hit an old ke70 'rolla and a pole.

he was f**ked up badly, covered in blood n shit and ran off.....

ill ask my mate at work 2moz im not 100% sure of the street i dont really know the area

Link to comment
https://www.sau.com.au/forums/topic/154582-funny-story/#findComment-2880405
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...