Jump to content
SAU Community

Recommended Posts

R31 Nismoid, you're misunderstanding my question. I KNOW you can only have one intake mod (pods or FMIC).

My question was to Dogknight who said:

"Air pod - only okay if you dont have a front mount added on (GTR excepted)"

Why would the GTR be any different from any other car in terms of only having one intake mod?

Edited by Phatboy

StolenS15, I think that the exhaust is legal as apparently it was taken to Vicroads for an inspection and got passed a month ago.

To me, it sounds relatively quiet even when revving for some reason. Definitely quieter than a lot of the WRXs around. If it drove past, the noise wouldn't immediately make you think it's illegal. I guess time will tell.

R31 Nismoid, you're misunderstanding my question. I KNOW you can only have one intake mod (pods or FMIC).

My question was to Dogknight who said:

"Air pod - only okay if you dont have a front mount added on (GTR excepted)"

Why would the GTR be any different from any other car in terms of only having one intake mod?

*sigh* im not. Your misunderstanding what the letters on the screen are saying :)

He means the FMIC is OK on a GTR (the factory one) as thats how it comes from the factory.

SO PODS ARE OK if you have the STOCK INTERCOOLER

If your running the standard boost and the standard ECU no boost controler why should the gt35 turbo effect the epa test aslong as the emssions are ok the turbo should pass right ??

Seriously mate, can you ring the EPA and argue with them?

This is a help thread for users, not a thread to debate the rules.

If you wanna argue/debate the rules then take it up with the Gov't body concerned (in this case, EPA)

i heard a cat will decrease the db reading by 5 db but how much difference does it make on the emission reading? Dunno why EPA is so agro for aslong as it passes there emissions test shuldnt it be sweet?

I think you should read up on what exactly it is a catalytic converter does :)

for a quick fix chicken wire is ur best friend, fill the f*kn exzorst with it make sur its in tight as well, lol the look on the epa guys face when u blow out 3meters of chicken wire on the db machine will be funny..

ash can i have a front mount intercooler, an air box but also a top mounted 3540 on my gtr???

i think having 3 cats and 3 resonaters and 1 oval muffler will fix the problem on the old 3 inch... Also what i understand from the thread is that we can have wastegates aslong as they are internal and standard right?

Edited by larri
R31 Nismoid, you're misunderstanding my question. I KNOW you can only have one intake mod (pods or FMIC).

My question was to Dogknight who said:

"Air pod - only okay if you dont have a front mount added on (GTR excepted)"

Why would the GTR be any different from any other car in terms of only having one intake mod?

As Ash mentioned. You can only have one additional air intake modification.

A GTR comes with a FMIC from the factory, so its legal to add pods and have the FMIC.

With a GTST it comes with a SMIC from the factory, so if you add a FMIC and Pods, you have two additional air intake mods.

But as always, read EPA guidelines and clarify with them. Lots of people drive cars that do not follow the guidelines. Do so at your own risk.

You cant change a GTR cooler from the factory one.

Just because the GTR comes with a FMIC stock, doesnt mean you can put another one in there.

Same as upgrading a R33 sidemount to a R34 sidemount. Its a change to the factory option

You cant change a GTR cooler from the factory one.

Just because the GTR comes with a FMIC stock, doesnt mean you can put another one in there.

Same as upgrading a R33 sidemount to a R34 sidemount. Its a change to the factory option

Thank you for the clarification. Word of mouth information always has to be taken with a grain of salt. Ill rectify my post.

Pretty sure I've read that you can change it...I don't have the exact wording handy, but it read something like:

An intercooler can be changed as long as the general position and dimensions are maintained...

having said that, you'd be quite stiff if you were done for a 34SMIC on a 33, or an aftermarket core on a GTR...

Read the EPA doco :(

"Intercoolers tha are larget than standard... are permitted only if no other changes to the intake system have been made. In other words, you may have a pod filter or modified/added intercooler, but not both"

I dont think it could be any more clear in all honesty :P

Well you change it aslong as it is a upgrade which is factory standard. e.g if u got a gtr intercooler you can change it to a v-spec intercooler as long as it retains the factory fittings to it i.e sensors etc

Dezz ur right dude, i got a large FMIC but got the standard airbox and meter as soon as they saw the air box he just closed the bonnet back :P

Edited by larri
As Ash mentioned. You can only have one additional air intake modification.

A GTR comes with a FMIC from the factory, so its legal to add pods and have the FMIC.

With a GTST it comes with a SMIC from the factory, so if you add a FMIC and Pods, you have two additional air intake mods.

But as always, read EPA guidelines and clarify with them. Lots of people drive cars that do not follow the guidelines. Do so at your own risk.

Well you dont need to have a pod on a GTS_T all you need is to modify the box and retain the meter thats what they what after all the meter as in original functioning way

Edited by larri

This thread has shown an amazing inability by people to perform even the most basic reading comprehension. Bravo!

Oh and Larri you have alot of work ahead of you to get close to passing epa. It would prob be cheaper for you to buy a stock R33 in the same colour, order another rego sticker and change the plates over for a day.

Well actually im just going to sell my engine in bits and pieces and just put back in the good old rb25 :P BUT i just been reading the epa article no where does it say you cannt put in a rb26 as long as it meets the same or more stringent requirements.

s_15 LOL who said that it would cost you that much... Do`nt know who charges you that much for a quick engine swap and a reswap later on. Hopefully you been saving alot if they are charging you this much.

i got 89.7 db backing off in the big rb26/30 woohooo thanks for your experience and information guys much appreciated. well i just put 2 cats in and 2 resonators and a big oval at DA back :D was sweetly done

Edited by larri

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...