Jump to content
SAU Community

Recommended Posts

can someone get me the mailing address of EPA, so I can send in my letter, or if it would be better to call them, the number to call them at. Now, I won't be able to read their reply, and I doubt they're willing to send the reply to my address in Singapore, so how do i know i have an extension?

Here you go.

Environmental Performance Unit

200 Victoria St, Carlton Vic

GPO Box 4395 Melbourne Vic 3001

Tel 03 9695 2675

Fax 03 9695 2520

vehicle.enforcement@epa.vic.gov.au

make sure to send it in as a registered letter. You wont hear back for a couple of weeks. Provide proof that you are overseas at this time etc

won't the singapore stamp be sufficient?

i could photocopy my passport though.

  • 4 weeks later...

Currently selling my car and need to provide a roadworthy will any of this get past

Cracked muffler

This according to racv inspection

Oil wetness evident rear of engine

Gearbox oil leak weapage evident

Centre bearing rubber saged

Windscreen glass scratched

Noisy wheels possibly wheel bearing

How much do u think this will cost to fix?

Or would it get passed the roadworthy?

Currently selling my car and need to provide a roadworthy will any of this get past

Cracked muffler

This according to racv inspection

Oil wetness evident rear of engine

Gearbox oil leak weapage evident

Centre bearing rubber saged

Windscreen glass scratched

Noisy wheels possibly wheel bearing

How much do u think this will cost to fix?

Or would it get passed the roadworthy?

Dunno how much but that won't pass

Currently selling my car and need to provide a roadworthy will any of this get past

Cracked muffler

This according to racv inspection

Oil wetness evident rear of engine

Gearbox oil leak weapage evident

Centre bearing rubber saged

Windscreen glass scratched

Noisy wheels possibly wheel bearing

How much do u think this will cost to fix?

Or would it get passed the roadworthy?

depends who does it, i'm not referring to a dodgy either but some look harder than others some of those things wont get picked up but some will for sure. I'd say RACV buyer checks are harsher than RWC checks.

cost will depend if you fix it, or you pay someone else to do it all.

depends who does it, i'm not referring to a dodgy either but some look harder than others some of those things wont get picked up but some will for sure. I'd say RACV buyer checks are harsher than RWC checks.

cost will depend if you fix it, or you pay someone else to do it all.

Not necessarily. RWC loose their license if they miss something, which is very hard to get back. RACV will do the checks but wont have to fix it, so they just raise everything which may not be a problem.

It wont get passed the RWC.

I reckon you might be up for around $400 to $1000 including parts and labour.

A windscreen is about $250 to $500 including labour these days. Gearbox out is a pain so there's a bit of labor there.

Windscreen's are cheaper than $250, im sure of it.

I'll find out how much my HR31 was recently, and the GTR. I dont rememeber em being too much.

Either way, that list, workshop doing it $600 at least

Ok well just back from mechanics and he said his going to try keep it under 1k. His changing the windscreen also fixing exhaust which has cracked, also found a leak on lh shocker, pretty much the list was a page long :O ...also light on spoiler is out and he said there needs to bea break light at eye level, seems strange that as long as I have had it has never worked....

Looks like I'll be lucky to get out under a grand, which really sucks

Well it sucks yes, but these are the hidden costs/maintenance that people don't think exists.

ALL cars cost money to run and its not just petrol and general servicing. Plus they are 15yrs old. I'm not at all surprised that stuff is on the list. The RWC for the GTR i recently purchased was 4 figures as well without a worry.

  • 3 weeks later...

So I got screwed by the Po-Po, can't really blame em, I was in the wrong. Gotta take the car into Macleod EPA vehicle inspection station once I've taken out the safc, ebc and 3inch exhaust. Anyone know how much the Macleod test costs?

Also, this is the second time the car will have gone in for a full inspection, the first time being a year or two ago at the Hoppers Crossing inspection centre.

I told the EPA guy who checked over the car last night that I had only ever gone in for a noise check only, he told me that in addition to going to Macleod, I'd get a formal warning in the post from EPA. When they look at their records and see that this is the second time I will have gone in for a full emission test, do you reckon they would send me a fine instead of a warning?

I'm just a little nervous about it, given that I'm saving up for an overseas trip in July and I've heard the fine is about $600ish.

  • 3 weeks later...

Does anyone know when all the rule changes occured (years)? i.e. the rules changed in 1989, and there are different rules for pre-1949 cars. I've read already on this thread that 1983 is another year. What are the rest?

Also, what are the restrictions? What can you do to a 240Z that you can't do to a 300ZX (just an example)?

Edited by Turboterrorist

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...