Jump to content
SAU Community

Recommended Posts

there are ones that move across the windscreen from side to side, they usually do the trick :)

nah, doesn't really matter IMO, theres all this fancy testing done on windscreen wipers, but it comes down to preference

ive seen the silicon ones work as well as kmart/supercheap/auto1 ones

Just bought some dual blade replacements from supercheap the other week... awesome... The last ones I used were genuine Nissan from my brother and the dualies are heaps better. They aren't massive things either so they don't look ugly.

Why have one when two is twice the fun!?!

Dude have you tried them?

What I was trying to say is Ive used the BigW ones, only to find that 2 weeks later they get noisey and dont wipe as nice. I made this mistake a few times trying different blade types.

The Nissan ones I have now have wiped the same way when I bought them 6 months ago.

I buy the cheap ones and complain loudly every ime i use them and realise i forgot to change them 3/6/9/12 months ago!

lol my friend got gyped by the pakaging of this $20 wiper "high silicon content" it's clear look like those silicon glue....he put it on, squeaked like mad...laughing my arse off

I think it's really a dried up moulded silicon glue

the best are still bosch spineless oems. The ones that european cars like merc, bmw, volvo, etc, use these days. You know... the flexi kind that has no backbone. Those are wonderful.. but expensive. And you need to modify your assembly to get it to fit. And i love Rain X. I haven't stopped using it since i started years ago.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
    • Alright I understand. The most likely case is probably gonna be that I just keep the OEM unit in the car as long as it works.
×
×
  • Create New...