Jump to content
SAU Community

Recommended Posts

Well it appears I have accumulated a bit of money in my bank Account again, so before the Mrs finds out I figure its best to spend it on the GTR :bunny:

Looking to replace my Standard suspension next.

Car has 400rwHP, Runs Semi RComp Tyres, Brembo F50 brakes, and Button clutch but everything else is standard.

Car is a toy, is used only for Track days, cruizes and maybe the odd show, so dont need / want anything to flash.

I've pretty much narrowed my choices to whats shown below, which is budget adjustable ride height Coilovers.

They all seem fairly similar in price and features so which do you guys reckon is the pick of the bunch, any that should be avoided, or are they all much of a muchness and should I just buy the ones with the brand name I prefer?

Apexi N1 Evolution Damper Curcuit

nengun-1230-02-apexi-n1_evolution_damper_-_circuit.jpg

Key Features

- Upper mounts for all models and adjustable upper mount where appropriate

- Largest diameter available, 52/46 diamemer and single tube type cylinder

- Upright type adjustable in 25 steps, inverted type adjustable in 13 steps

- Advanced new damper oil which controls oil deterioration developed from GT racing

- Quick adjustment for attenuation power adjustment

- Dust boots in all models

- New design height pitch wrench attachment

- Can be rebuilt

$2700 Delivered

Buddy Club - Club Racing Damper

nengun-1096-00-buddyclub-club_racing_spec_damper.jpg

- Height adjustablity w/ high quality aluminum perches

- 15 way adjustable dampening

- Pillowball upper mount and camber plate

- Buddy Club springs

$1905 Delivered

Cusco - Zero 2 Suspension

nengun-0756-00-cusco-zero_2_suspension.jpg

$1790 Delivered

Endless Zeal function Xs

nengun-0384-00-endless-zeal-function-xs_suspension.jpg

Linear Spring Motion with no Friction Loss is superior and the shock can be adjusted precisely (Function-Xs includes 6-Way Damping Adjustability). Lightweight aluminum upper mounts, spring seat preload and spring seat lock, height-adjustable lower brackets and lock seats (for non-strut type applications) include a durable, Alumite finish for rust proof characteristics. Steel shell casing includes a special chromate plating for rust proof characteristics also.Adjustable brackets are newly designed and slender

$1908 Delivered

HKS - Hipermax II

nengun-0681-00-hks-hipermax_ii_full_kit.jpg

The Hipermax II coilover suspension kits have been engineered to be track ready suspension that is still "streetable". Dampening and rebound can be adjusted simultaneously in 30 different increments to deliver the desired shock compression and rebound stiffness. Ride height is adjusted by simply rotating the 60mm spring retainer perches around the chromed steel shock body. The dual interlocking spring retainer perches prevent spring movement and unwanted ride height changes

$1813 Delivered

Tein - Mono Flex

nengun-0977-00-tein-new_for_2006_mono_flex.jpg

- Full-length adjustment and height adjustment for separate setting of the height and spring preload.

- 16 levels of damping force adjustment (compression and rebound together).

- Teflon coating for rust prevention.

- Newly designed spring seat and spring seat lock for easy height adjusting.

- Pillow ball upper mounts are included.

- Compatible with EDFC.

$1945 Delivered

Trust Greddy - Type S

nengun-1442-02-trust-greddy-performance_damper_-_type_s.jpg

- Advanced Monotube design

- Screw type adjustment for increased accuracy

- Strengthened rubber upper mounts for improved rigidity

- Adjustable upper mounts where model permits

- Lightweight aluminium brackets to reduce weight over standard components

- Lightweight specially designed manufactured high tensile steel springs

- Produced by Takeshi Tsuchiya

$1621 Delivered

Tein - Superstreet

nengun-0034-00-tein-super_street.jpg

High performance and cost effective.

- 16 levels of damping force adjustment (compression and rebound together).

- Ride height adjustable.

- New paint coating for rust prevention.

- Pillow ball mounts are optional (on certain applications).

$1421 Delivered

Cheers

Lindsay

Edited by PSI_GTSII
Link to comment
https://www.sau.com.au/forums/topic/164677-which-coilovers-would-you-choose/
Share on other sites

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

It all depends what you want to do with the car.But for all round you cant go past the tein stuff.

$1421 is a bloody good price for the super street.I havent seen them that cheap.

Care to PM me on where you get them for that price.

Stay away from the G4 and HSD.Those adjustments arnt entirely acurate,and its more like 7-10 points of adjustment rather than 36.

Also the spring rates are all over the place.

benm: Thx mate i've seen the whiteline groupbuy, for right or wrong its not really what i'm after

nytsky: just nengun mate ;)

Edited by PSI_GTSII

I quite like the HKS Hypermaxx II. Thye best car i have ever driven at teh track had them and Nismo adjustable arms. The car was brilliant to drive. Much better then my car.

On the street though it was a bit harsh...but on the track i quite liked it. And combined with that it seemed very quick and grippy as well

benm: Thx mate i've seen the whiteline groupbuy, for right or wrong its not really what i'm after

nytsky: just nengun mate :P

Why?

Is it infinite height adjustment you want?

I can arrange Eibach coils and Bilstein coil over conversion kits (add $900 to the Group Buy kit price)

If you want NON rattly spherical bearing tops I can arrange Noltec ones.

Or is a brand name thing?

:nyaanyaa: cheers :domokun:

benm: Thx mate i've seen the whiteline groupbuy, for right or wrong its not really what i'm after

nytsky: just nengun mate :P

your really after suspension,why wouldn't you look at top quality german engineered suspension with springs bushes designed for aussie conditions & at the right price, up to you mate of course, but i'm not the only one who is more than happy with sk's group buy....whatever way you go good luck & good driving

Why?

Is it infinite height adjustment you want?

I can arrange Eibach coils and Bilstein coil over conversion kits (add $900 to the Group Buy kit price)

If you want NON rattly spherical bearing tops I can arrange Noltec ones.

Or is a brand name thing?

:P cheers :banana:

Speaking for myself, infinite height and a brand name is a major thing for me.. Out of interest, what does your group buy have on the likes of custom order Buddy clubs, or the likes?

Why?

Is it infinite height adjustment you want?

Or is a brand name thing?

:banana: cheers :banana:

I knew I would have to explain myself regarding this decision :banana:

Basically all it boils down to is I want a change, I know for a fact SK's Whiteline group buy will be a well sorted package, better infact than a set of Jap Coilovers.....because.....I have ran Whiteline springs, Swaybars, strutbraces etc with Koni Shocks in my last two Performance cars (SR20DET Bluebird & RB30ET R31 SVD GTSII Skyline).

Coming from a background of Engine swaps into Predominantly Aussie sold Jap cars I was always envious of the Jap import boys seemingly endless availabilty of Bolt in over the counter stuff, now I am one of those people I want to do the same :P

Personally, I think jap coilovers are fantastic, but only on the track and japanese roads. All the roads there are silky smooth. Even the suburbs. No potholes, nothing..Just nice smooth and flat roads.

No they are not. They are no better than Australian roads.

I can vouch for the SK Bilstein + Whiteline kit. Have it installed in mine and really improved handling over my std struts + king springs.

Ive heard the HKS are possibly the hardest setup you can get and (common) Superstreet's being the cheapest. I like the look of the upside down Monoflex though..

No they are not. They are no better than Australian roads.

lol, I was thinking the same thing. Having spent a fair bit of time driving in japan now it's definately not all billard table smooth. yeah in tokyo the main roads are nice, and even out of the city in satelite citys like chiba the roads are awesome, but spread out a bit, or get on the back roads and it's a different story, plenty of potholes etc, but they do seem to be quick to fix them around tokyo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...