Jump to content
SAU Community

Whats The Biggest Low Mounted Twin Turbo Setup For A Gtr

danoz

By danoz,
in Engines & Forced Induction

 Share

Recommended Posts

danoz Collaborator

danoz

Posted
Posted

hi guys thinking of building my rb26 with a step 3 hks 2.8 kit and want around 700awhp and would like to stick with the standard low mount twin system i current had twin garrett 2860 with 540awhp and my oil pump went bang and narded the motor so is the biggest turbos that are still standard low mounts the trust 618z and does any 1 no how much power this will make as i want the most response with minumal lag

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Most response with minimal lag does not work with ~520rwkw im afraid.

It never has, and never will.

I don't even think you'd be able to make 500rwkw with the 618s. Or any other low mount for that matter on PULP :)

As 2860's and 400rwkw is a little bit over what everyone else comes close to making. So i think your reading there which was high is confusing the possibilities of it all.

Your probably looking at a large 900-1000hp single, or highmounted larger twins if you want ~520rwkw.

Gav Mentor

Gav

Posted
Posted
what do twin GT-RS make?

I'm at 580 awhp with my GT-RS terbs and 100% injector duty with 26 odd psi. This is also fairly conservative ignition timing.

I'd say that with ample fueling and more aggressive timing, you should be able to get in the order of 620 to 630 awhp with these terbs on 98 octane pump fuel. This assumes head porting, long duration/high lift cams etc.

BOOSTD Mentor

BOOSTD

Posted
Posted
hi guys thinking of building my rb26 with a step 3 hks 2.8 kit and want around 700awhp and would like to stick with the standard low mount twin system i current had twin garrett 2860 with 540awhp and my oil pump went bang and narded the motor so is the biggest turbos that are still standard low mounts the trust 618z and does any 1 no how much power this will make as i want the most response with minumal lag

I gather the 2860's are the -10's?

danoz Collaborator

danoz

Posted
  • Author
Posted (edited)
I gather the 2860's are the -10's?

not to sure on sizes will double check with serial numbers just running twin 400hp garret turbos at 1.6 bar 540awhp very responsive. so i think some people mite be not seeing the possibiltys of this setup. alot of guys a running hks 25/30 to 540 rwhp including myself in a cefiro so this isnt even pushing it to the max 1.8 bar that i could in my gtr

Edited by danoz
700HP-GTR33 Mentor

700HP-GTR33

Posted
Posted
I gather the 2860's are the -10's?

-10's correct...

they are rated to support 400hp each...800hp in total.

This is at the motor, and not possible obviously if you have stock everything..

Your set up was probably with -10's already.

The HKS 2.8 stroker kit + the cams would have been very responsive...shame the whole thing went bang due to the oil pump.

Which type of turbo are you running?

As for the biggest low mounts for a gtr..I was sure the -10's were...I will look it up and get back to you.

Cheers

STATUS Grand Master

STATUS

Posted
Posted (edited)
Most response with minimal lag does not work with ~520rwkw im afraid.

It never has, and never will.

I don't even think you'd be able to make 500rwkw with the 618s. Or any other low mount for that matter on PULP :)

As 2860's and 400rwkw is a little bit over what everyone else comes close to making. So i think your reading there which was high is confusing the possibilities of it all.

Your probably looking at a large 900-1000hp single, or highmounted larger twins if you want ~520rwkw.

I have seen custom low mount td06's/T67's and twin GT3037s....but the T618z are close to being the largest kit, tomei do one also but i cant remmeber the specs. I have seen just shy of 500rwkw with T618z's but require lots of head work.. a single is cheaper and easier...

Edited by URAS
danoz Collaborator

danoz

Posted
  • Author
Posted
Does this help?

thanks mate this was great... just to stat my setup was a built rb26 with twin low mount 2871rs - 10 with all the usually head a other upgrades was running 1.6 bar with 540awhp.

now im goin to build a 2.8l hks stoker so i want 650-700 awhp i loved the last setup was great all in originals posistion and hade very minimal lag.

so i want another 100 awhp but dont think my current setup with turbos will do this but if i go a big single like a hks to4z im affraid of getting to much lag. so that is why i would like to stay with the twin low setup so any idea people would be great it is a street track car so i dont want lag so any info would be sewwt people and thanks for the help so far

  • 2 weeks later...
Brockas Proficient

Brockas

Posted
Posted

As far as I was aware, my current setup is as big as you can low-mount.

I've got twin HKS 2835's with internal gates.

Compressor housing is apparently exactly the same as the GT-RS but exhaust housing is somewhat bigger.

Beer Baron Grand Master

Beer Baron

Posted
Posted

to the best of my memory the biggest off the shelf low mount kit for GTR is either one of the tomei kits, or the apexi kits. I thinking the apexi ones. have a look into those if big low mount power is what you crave. but it has to be said HKS GT-RS on a 2.8 will be a pretty nice set-up and easily breeze past 400awkw with all the right bits in place to get it there.

  • 9 years later...
sultanaz Proficient

sultanaz

Posted
Posted
On 10/06/2007 at 0:56 AM, R31Nismoid said:

Most response with minimal lag does not work with ~520rwkw im afraid.

It never has, and never will.

I don't even think you'd be able to make 500rwkw with the 618s. Or any other low mount for that matter on PULP :)

As 2860's and 400rwkw is a little bit over what everyone else comes close to making. So i think your reading there which was high is confusing the possibilities of it all.

Your probably looking at a large 900-1000hp single, or highmounted larger twins if you want ~520rwkw.

Super Dig out 
But my RB26/30 runs 716whp on E85 with bumped up comp.
gets boost at 1700rpm and runs 10.3 on street tyres, stock box & without a burnout.
Excited to get on the MT this year with a burnout.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...