Jump to content
SAU Community

Recommended Posts

Hi there i am trying to remove the oil filter from my RB25DET, i have a Greddy plenum so its a bit harder to get to than before. I broke a oil filter remover, twisted and warped the handle completely. Tried the ol screwdriver through the filter, doesn't turn the filter just rips up the metal.

Now it is stuffed beyond anthing, the front half of the filter is mangled. Im thinking i might have to hacksaw it off, just wondered of anyone had any ideas before i do that, cause its really hard to get to.

Theres a oil filter remover that I use on mine that suits it no problems. It looks like a pair of multigrips and the jaws are curved to go around the oil filter. This one works best on the r33s as Ive got about 5 different oil filter removers.

this is my trick, call it gay if you want lol.,. get one of those dentist rubber gloves. jus put it over the oilfilter try taking it off again by hand. you got way more grip.

Haha, I use the same trick, works well.

he said he used (and broke) an oil filter remover in teh first post. Why was it on so damn tight?

LOL, i got one of those seatbelt strap removers, the filter doesn't move it just crushes. Tried smacking a screwdriver on the rim of the filter, just cuts a biger hole, doesn't budge the filter.

NEXT STEP, i removed all the paper shit from the inside of the filter and tore the whole thing apart, now i can see the front face of the filter, taking a dremel to it tonight, i have no idea WTF they did with the filter, i have replaced the filter at least 5 times before, never this much trouble.

I don't think you can undo it by hand anymore. When you punch a screw driver through the filter, it leaves sharp metal hanging out. I think your only option now is to hack the thing out or something.

I think your filter's gonna turn out like the pics above ^^^

I have never ever had this problem with an oil filter. I never destroy it by putting the sccrewdriver through it, because it just makes it hard to work with.

I've had some mega tight ones. the best tool is your hands. What I do, is I clean the filter off really well with brake cleaner, so ti's not slippery. I then use one of those sticky matts - the ones from the supermarket that you use when a jar is hard to open for weak mums. I use two hands on the filter. Never fails.

^^^^^^^^^^^^^^ im with you!

Rubber gloves normally do it

if not ive got a filter strap thing but its hard to get in there

if not get a mat thing

then if all else fails call my Hungarian mate... for a bit of WOG POWAH

seems to do the trick!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...