Jump to content
SAU Community

R32 Gtst Wide Body

Adz
 Share

Recommended Posts

  • Replies 89
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Roy Grand Master

Roy

Posted
Posted
You know its a 25 yeah. Its making 8psi at 2000 and full boost at 3500. Said to be one of the most responsive cars race pace has tuned. Everything seems to be working really well together.

So it has a 25 bottom end with 26 head and plenum? It looks to be a 3071R or 3076R based on the comp cover?!?!?! Sounds very nice and responsive. Very keen to see it at the track. LOL. i would so give you my new suspension (Tein RAs) and brakes (Brembo f50 on 340mm rotors) so we can see an R32 GTSt with all the good gear mixing it with the GTRs :domokun: (if only i could afford to )

I do have my now spare Bilsteins that i was going to get re-valved and new platforms on to suit Eibach springs

Al Grand Master

Al

Posted
Posted

I said it before and i'll say it again: Looks awesome!!!

Top work Adz.

Bris: it's a rb25 head and bottom, soon to be stroked to rb28. Only using plenum and throttle bodies.

Is the Garrett 3037 bigger or smaller than the Garrett GT30R (GT3076R, 500hp)?

Adz Experienced

Adz

Posted
  • Author
Posted
So it has a 25 bottom end with 26 head and plenum? It looks to be a 3071R or 3076R based on the comp cover?!?!?! Sounds very nice and responsive. Very keen to see it at the track. LOL. i would so give you my new suspension (Tein RAs) and brakes (Brembo f50 on 340mm rotors) so we can see an R32 GTSt with all the good gear mixing it with the GTRs :thumbsup: (if only i could afford to )

I do have my now spare Bilsteins that i was going to get re-valved and new platforms on to suit Eibach springs

So yeah as Al said its a RB25 head and bottom end with RB26 plenum and throttle bodies. It requires a Blitz adapter plate which is very hard to find in aus these days. I believe I have one of two in Aus supplied by Autobarn. You then need to re fabricate the thermostat housing to clear the VCT and relocate the idling gear as well as fit a RB26 oil filter adapter. Im sure there would be some other little tricks involved that only Race Pace know.

The turbo is a 3037 garret equivalent which is a 3076R. I really wanted to put big brembo's on but will see how the current set up goes and might have to wait for the bank to gain confidence in me again lol. Should give a few GTR's a run for their money.

Dont want to drift it atm as its too pretty and I dont want to muck it up in a hurry. Im sure drift will get the better of me sooner or later. Pretty sure it will be drifting by Christmas.

Roy Grand Master

Roy

Posted
Posted

I wonder if the variable timing of the 25 head and PFc combined with the inlet plenum is the reason why the thing is so responsive. So what is th efinal mumber the car makes with the 3076R?

Does sound nice...please tell me it has open gate...the invasion of the loud GTSts :thumbsup:

Adz Experienced

Adz

Posted
  • Author
Posted
I wonder if the variable timing of the 25 head and PFc combined with the inlet plenum is the reason why the thing is so responsive. So what is th efinal mumber the car makes with the 3076R?

Does sound nice...please tell me it has open gate...the invasion of the loud GTSts :thumbsup:

Dude!!! Open gate all the way.

Yeah thats what I was going for. The setup is garenteed 40hp at the wheels straight up with heaps of response. In fact its all working a little to well. Due to the low back presure exhaust system and an efficent intake set up the exhaust gasses prefure to go throught the turbo than out the wate gate so shes over boosting. So final power figures and dyno sheets are not available. A new manifold and a 48mm wastegate are on their way to fix it all up. Then its time to finish the tune and shes done. Looking to make 300kw on good fuel day in day out on stock internals.

Roy Grand Master

Roy

Posted
Posted

CHAMPION :thumbsup: Stock internals GTSt all the way BABY!!!!!!!!!!!! :O

I have an adaptor for the inlet drawn up and ready to do a mock fit up with for the RB25 inlet side using the RB26 inlet. Also the exhaust side as i dont think i can turn 100% homo and go low mount twins on the 26 head. I think i need to make up my adaptor plate so that i can run my RB20/25 HKS exhaust manifold with Brother Gate providing the tunes, all with the reliability of low mount cast manifold. All the plans depend on what i can source at a decent dollar figure...as beign atight ass R32 owner, i wont dare spend more more then 60% of what i spend per week on grog and Indan :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...