Jump to content
SAU Community

Recommended Posts

Thanks guys... Especially for putting up with this on a Skyline site!

As for the specs...

The 1968 chassis is radically customised, 200mm widened so it has the same footprint as a Porsche 944/968. I've used parts from a 1994 968 Porsche to do the rack and pinion steering conversion, a-arm/mcpherson strut front end, and the IRS rear end. Brakes are 986 Porsche/brembo 4 spots all round. Wheels are from a 996 and are 18x8 and 18x10's. Bridgestone RE55 rubber. Coilovers are Tein super streets... yet to sort out the spring rates and valving. The gearbox is from a 911 turbo, axels and CV's are 968. Clutch is a custom twin plate that will support around 500hp.

The core body is a 1966 shell and is mostly stock except for the single piece glass and power windows. All the rear windows are plastic for weight reduction. Door linings, dash and the floor of the car are all made from carbon fibre sheet material. Guards are custom made fiberglass. The firewall is a 2 piece bolt in aluminium job, and is extended forward to allow a lot more driveline/engine to fit in the back end. The entire back end of the car is removable and unbolts to allow full access to the rear suspension and engine. Air intakes for the turbo's are ducted from the rear quater windows.

The engine is entirely custom and is based on a VW water cooled die cast aluminium block, but is converted to air cooled. It is bored and stroked to 2.5lt. Induction side there is a pair of 8cm trust T517z's and PWR 600hp water to air intercooler. Oil system uses an external RPM 4 stage dry pump. The oil tank, coolers and battery are mounted at the front of the car for better weight distribution. The engine runs a distributorless 4 coil MSD igniton with a AEM CDI. Fuel injection with a Wolf V500. Air cooling is based on a 911 turbo setup with a carbon fibre cooling shroud.

And a video of the engine running. If you have good speakers crank them up!

http://www.youtube.com/watch?v=W_P2mtkncNM

And 2 more pics.

DSCF0132.JPG

DSCF0136.JPG

Cheers,

Ian

We have been playing with bump steer adj over the last little while. Typical me, "can't be that hard to make". MkI was pretty basic and worked well...... until there was a big excursion at speed hitting the back of a ripple strip at an odd angle. Result below.

Picture094.jpg

So then the thinking was we would try a commercially available option. Just Jap sent these ones that were cool but way to short. My brain did its usual trick and put me infront of the lathe again, And this is what came out after 2 0r 3 nights of toil and frustration. 9Mine left, JJ right)

Picture093-1.jpg

And fitted in the pig. I'm slightly ashamed to admit, Its a Toyota. With all Nissan underpinnings!!!!

Picture091.jpg

3538480432_4442aa60b9_o.jpg

That is a nice bit of engineering Noddy. Have you made similar roll centre changes to the Yellow R33?

got mine back on the track this weekend, the guys at UAS did a great job. 150+ laps flat out without any temp problems. Basically the only time we stopped was to refuel it.

wp-100717.jpg

next up is a 1 hour race at wakefield in 5 weeks

great news dundan! good luck for the 1hr mate. :ermm:

  • 2 weeks later...

Here's the shed on Christmas Morning.

I hung a shed key on the Christmas Tree and when all the presents were gone I pointed it out to my 8 year old son and played "hotter colder" with him til he found it.

I've now upgraded to an Arrow AX9 too.

post-41741-1282090587_thumb.jpg

Here's the boy at Monarto Go Kart Track

post-41741-1282091321_thumb.jpg

Here me at Mallala I've now added some cusco goodness to keep it a bit flatter.

post-41741-1282090662_thumb.jpgpost-41741-1282090718_thumb.jpg

post-41741-1282090387_thumb.jpg

Very cool mate. I'd love to have received a go kart under the Christmas tree!

So would have I, now I have to live all my motorsport dreams through him.

I suppose it could have been worse for him, I could have been into Stamp Collecting.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...