Jump to content
SAU Community

Recommended Posts

  • 2 months later...

hey everyone,

will be getting a nistune set up for aftermarket computer tuning for my r33 gts-t, rb25. it is getting done on the gold coast so if anyone wants info on location and who to call let me know. and if anyone has a z32 computer for me that would be muchly appreciated too.... :P

smidy

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/6/#findComment-4484789
Share on other sites

  • 3 weeks later...
Do you have a nistune for the R34 gtt auto Neo 6 Rb25det?

please say you do???

Nistune sure do....

We have done 3 neo 34 auto's now. Doing more mod's on "sammy34" atm, hi-flow turbo, 550cc inject, Z32 AFM.

Getting to the dyno today. let you all know how it went.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/6/#findComment-4515552
Share on other sites

Nistune sure do....

We have done 3 neo 34 auto's now. Doing more mod's on "sammy34" atm, hi-flow turbo, 550cc inject, Z32 AFM.

Getting to the dyno today. let you all know how it went.

How much the nistune roughtly cost?

I got the same mods except, hybird t04e. with stock AFM

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/6/#findComment-4515833
Share on other sites

How much the nistune roughtly cost?

I got the same mods except, hybird t04e. with stock AFM

I think i payed just under the 1g mark for mine including dyno time. Great computer, guys putting them together down at EFI know what there doing as well. Dont think id go anything besides nistune enles you were chasing rediculous number for a street car.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/6/#findComment-4516264
Share on other sites

interesting piece of kit

how do these compare to PFC beside the fact they dont have a hand controller?

similar league?

Nistune setup is tuned from the diagnostic port in driver side cabin fuse box, advantage of it is having the stock ecu diagnostics, whereas (i dont speak from experience) with the PFC setup it's harder to diagnose problems. Also my preferred workshop in SA (Boostworx), Nistune is cheaper to tune than PFC.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/6/#findComment-4516945
Share on other sites

They also retain all of the factory features like cold start etc.

only disadvanteges I know of as to date or as far as I understand are on the RB25 Neo. U cant use Nistune if your putting on an aftermarket plenum, nistune cant compinsate for loosing the traction control system attached near the throttlebody and it locks the car into third. So really I guess the main reason im using the Nistune is because it retains the standard auto computer. Change the plenum = change the computer, change the computer you need to rebuild the gearbox and install a shift kit. :devil:

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/6/#findComment-4518161
Share on other sites

I am tuning a NISTUNE board for a friend. Though its CA18DET engine.. It is really awsome, and to that price tag i has! Great!

Only trouble is the feed from LM-1 acts up when logging in the software.

Mark or Matt or whats his name, is working on a software update. But otherwise its really nice! And easy to mount.

We changed injectors to some big 660CC, did some correction, and car startet up first time. Took 5 min to get the car to idle perfekt.

If I had know about it when i had my CA18DET engine, i would have used it. But went on to Apexi FC with the RB25DET, and now moved on to a ViPEC

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/6/#findComment-4518347
Share on other sites

at the moment i'm running only nistune on a complete stock set up in my r33 gtst and even just having the engine tuned with no extra mods you can notice the difference in the car with its power.

I recommend EFI PERFORMANCE for anyone located on the Gold Coast or even Brisbane these guys not what they're doing and will give you the best possible result without ruining your engine.

EFI PERFORMANCE - unit 3/15 Emeri st stapylton (Yatala Drive-in) (07) 3801 8075

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/6/#findComment-4525540
Share on other sites

at the moment i'm running only nistune on a complete stock set up in my r33 gtst and even just having the engine tuned with no extra mods you can notice the difference in the car with its power.

I recommend EFI PERFORMANCE for anyone located on the Gold Coast or even Brisbane these guys not what they're doing and will give you the best possible result without ruining your engine.

EFI PERFORMANCE - unit 3/15 Emeri st stapylton (Yatala Drive-in) (07) 3801 8075

What ECU are they using for that?

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/6/#findComment-4525622
Share on other sites

How are peoples results using nistune for RB26s? If you are using it on your RB26 please post engine mods and results (dyno), can't see many if any in the RB26 turbo upgrade thread.

Are there any limitations when compared to other standalone ECUs (e.g. ViPEC, PFC)?

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/6/#findComment-4527160
Share on other sites

Hi there from London ..

I have the same question ->

"What ECU are you using??"

I was told there is no Nistune for the R33GTST ..

Cheers,

Andrew

some fo the boards are interchangeable, for example on my r34gtt I believe they used the VG30 board.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/6/#findComment-4527884
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...