Jump to content
SAU Community

Recommended Posts

coils are coils, but you would need to stuff around mounting them, they would not have bolt in direct fire ones like jjr/splitfire/owm

coils are denfinately not all the same. the aftermarket stuff has really come a long way. the nissan std coils r quite good, but imo there is a whole range on very powerful coils out there that would b better than std (and prob cost around the same sort of $$). example, i changed to MSD coils from stock ones in my V6 commodore and dropped from 14.5 to 14.02 with just the coils and a small adjustment to the tune in the last 1000rpm (merely to correct a/f ratio). making brackets isnt that envoled either.

Edited by Raysboostin
  • 3 weeks later...
Well i have some issues with Splitfires, the first set died 6 montch after purchase 4 coils startred to die, and it looks like that migh be the case again, either way my Central 20 ECU and splitfires don't like a gap above .8 mm at 15 psi

The issue is clearly with the ecu/tuner combination.

Have your tuner pull his finger out of his bottom and check the coils dwell vs rpm has been setup correctly.

If its not it will either provide a weak spark or overheat and kill the coils quickly.

My bets are on the later.

  • 2 weeks later...
The issue is clearly with the ecu/tuner combination.

Have your tuner pull his finger out of his bottom and check the coils dwell vs rpm has been setup correctly.

If its not it will either provide a weak spark or overheat and kill the coils quickly.

My bets are on the later.

does that mean if i put aftermarket coilpacks in i will have to get a re tune. you cant just put these in?

my splitfires died after only 8 months :ermm: . i just hope the workshop that installed them will replace them under warranty, guess i'll find out tomorrow when i speak to them

Edited by into oblivion
Well i have some issues with Splitfires, the first set died 6 montch after purchase 4 coils startred to die, and it looks like that migh be the case again, either way my Central 20 ECU and splitfires don't like a gap above .8 mm at 15 psi

are you sure your central 20 ecu supports sequential ingition and is not operating in batch mode or something ?

out of the 50-60 or so splitfires we have supplied in the last 12 months or so we have NEVER had a single one fail

out of interest OEM coils are 180 each trade price and the coil pack loom (engine sub harness) is about 200$

standard ecu

mods - zorst, FMIC, pod

only mod i added since splitfires was manual boost controller set to 10psi, 200rwkw

and i don't thrash my car, only done 5000km since coils changed to the splitfires

Edited by into oblivion
standard ecu

mods - zorst, FMIC, pod

only mod i added since splitfires was manual boost controller set to 10psi, 200rwkw

and i don't thrash my car, only done 5000km since coils changed to the splitfires

ok as you didn't fit the splitfires your self I'm assuming your guessing that the coil packs have died.

In other words you haven't pulled the coil packs out yourself, inspected them did the usual trouble shooting one does before they come to the conclusion that something has died. :ermm:

What brought you to that conclusion?

If its started popping it can be maaaaaaaaaany things. :D

The AFR's are too rich.

Plugs need regapping.

Plugs need replacing.

Ignition has crapped its self (if its a s1).

So fingers crossed its something silly. :D

yes i am guessing so probably shouldn't assume :D

but the car makes excatly the same noise as when my OEM coils had died.

last week it started stuttering/shaking at idle. now at 4000rpm onwards it pops to the bs

took it to my other local mechanic and he had a quick check of the plugs/sensors/af meter couldn't find anything obviously wrong

plugs were replaced same time as splitfires installed

don't have an a/f ratio gauge

series 1

Edited by into oblivion

yes, hope hope it's something basic. otherwise hope hope it's still covered under warranty. i've still got the receipt from the mechanic.

anyone know what the warranty is on splitfires, someone please say 12 months?

  • 3 weeks later...

found these coil packs on ebay. they are called super spark coils and they say that they give you 10% more spark and they are to suit RB20, RB25 and RB26. at $499 what do you reckon? has anyone else heard or know of anyone using these.

they look to me to be similar looking to the JJR packs

http://cgi.ebay.com.au/SUPER-SPARK-Coil-Pa...1QQcmdZViewItem

found these coil packs on ebay. they are called super spark coils and they say that they give you 10% more spark and they are to suit RB20, RB25 and RB26. at $499 what do you reckon? has anyone else heard or know of anyone using these.

they look to me to be similar looking to the JJR packs

http://cgi.ebay.com.au/SUPER-SPARK-Coil-Pa...1QQcmdZViewItem

They are exactly the same as JJR, only $100 dearer per set.

found these coil packs on ebay. they are called super spark coils and they say that they give you 10% more spark and they are to suit RB20, RB25 and RB26. at $499 what do you reckon? has anyone else heard or know of anyone using these.

they look to me to be similar looking to the JJR packs

http://cgi.ebay.com.au/SUPER-SPARK-Coil-Pa...1QQcmdZViewItem

They are exactly the same as JJR, only $100 dearer per set.

Kudos sell SUPER SPARK doesn't he???

Im about to buy new coils myself but haven't decided if i will go JJR's or Splitfires :bunny:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...