Jump to content
SAU Community

Recommended Posts

  • Replies 812
  • Created
  • Last Reply

Top Posters In This Topic

f**k this thing is loud on the inside.

don't know how happy stu was with it....but I was lucky enough to do some laps in the passenger seat and:

a. it goes like stink

b. handles pretty good and

c. stu seems to handle a steering wheel pretty good.

the dino-line is a unusual setup but its working damn well.

thanks mate, made a small error with uncle Duncan in the car like missing turn 1 but other than that the car was much better behaved. was much more confident under braking.

have some light throttle tuning to sort out and a gearbox selector issue but other than that very happy.

car held its own in a staight line against a few cars boasting 70kwatw more, but the weight factor would have a lot to do with it. wet weather sessions were interesting.....but car was solid once it dried out.

f**k this thing is loud on the inside.

don't know how happy stu was with it....but I was lucky enough to do some laps in the passenger seat and:

a. it goes like stink

b. handles pretty good and

c. stu seems to handle a steering wheel pretty good.

the dino-line is a unusual setup but its working damn well.

  • 2 weeks later...

Some good Superlap type cars in the new issue of Zoom Magazine, boys and girls. Tilton Interiors Evo, a psycho red Supra (SUPRAT) and some great photography from the event.

There's also a full feature on the Roger Clark Motorsport (RCM) Gobstopper WRX and Stu's awesome LS1 R32.

Enjoy :-)

29cwc28.jpg

I knew there was a build thread around here somewhere and i've only just found it now.

Seeing this animal in the metal idling at a standing still and running on the track is a sight to behold. It's something that you just can't visualise mentally because it has to be seen in person.

Some shots I snapped of it running at Oran Park at the SAUNSW track day. :)

_F4U8528.jpg

_F4U7492.jpg

_F4U8084.jpg

_F4U8257.jpg

cant run any forced induction over 3000cc engine capacity in sports sedan and maximum of 6000cc aspirated.

ill stroke this engine when i freshen it up which hopefully wont be in the near future. car is a handful now with 300kw, cant imagine another 100kw.

currently in the process of getting car log-booked, just finishing off a few little odds and ends like remote battery isolator cable and sealing rear parcel tray. Getting inspected this week-end.

Thanks for the great words and pictures Xmetal. love the shot at the back of the track....

ls1 is an import. 5.0L V8 was holdens last V8 motor castine block.

if u knew something about those motors u can strap a snail on and get easy 400rwkw with stock internals..no shit motor!

Car all log-booked and have sent away for my L2S liscence.

Looking forward to show-n-shine in december, as i dont think ill get it out for a meeting before the end of the year. Discovered the tach-recall button and got a shock to see highest recorded rpm, probably shouldnt do that too often.

post-20078-1257797007_thumb.jpg

  • 2 months later...

reverse gear repaired and gearbox back in the car, looking forward to next track day which will probably be at wakie and then powercruise.

weighed car and it went 1193kg which is a little heavier than i thought but still lite enough.

reverse gear repaired and gearbox back in the car, looking forward to next track day which will probably be at wakie and then powercruise.

weighed car and it went 1193kg which is a little heavier than i thought but still lite enough.

Good on you man you should be proud of yourself for trying this . i have a porsche carrera 2 with an LS1 in it, with great help from others , the LS1 motor is lighter than the stock 6 with turbos and generates more power . Good luck
Good on you man you should be proud of yourself for trying this . i have a porsche carrera 2 with an LS1 in it, with great help from others , the LS1 motor is lighter than the stock 6 with turbos and generates more power . Good luck

Do show, where is your build thread?

  • 2 months later...

hey guys, long time since any updates. Running the car on Anzac day to finish tune on the track to tidy up some light throttle issues. Also trying some new wheel alignment specs. Hope to see some of you there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The front prop shaft from my GTR had very notchy unis, which obviously needed replacement but unfortunately uses the (usually) non-replaceable (staked) type.     A new shaft is something like $2K plus shipping from Japan.   I wouldn't even bother asking the local Nissan spares dept.     Rang Hardy Spicer but no go, which surprised me a little.     There's a place over Dandenong way that would make me a 'performance' shaft but un-necessary in my situation.   They claimed to be getting the equipment in to replace staked unis but couldn't give me a timeframe.   Anyway, long story short, found a place to do the work just 5 mins from me: https://knoxdriveshafts.com.au $420 (cash) and about a week later I have my driveshaft back.   Price includes balancing. Owner is a one man band working out of a shed in his backyard but from what I could see he's very well setup with some expensive equipment.  
    • Thanks. That's what I was after. One of the kits, the o-ring side is too big diameter. The other kit is a plate with a o-ring to seal and the hose connection offset.
    • oops that seems much easier lol. 
    • Are you using the factory rail?  Is there any reason you don't want to use one of the two you already have, they don't have to attach to the fuel rail directly.  If you 100% must have a FPR that directly bolts to the fuel rail, you could get a Radium setup. I use a radium fuel rail and the direct mount regulator, it is quite a sexy setup. 
    • https://www.google.com/search?q=adjustable+fuel+pressure+regulator+nissan+fuel+rail+adapter&sca_esv=6710113de42d5150&source=hp&ei=GhPbaNHfNZeinesPyPqEiQc&iflsig=AOw8s4IAAAAAaNshKnLkjQGMWYT5EyclmXEJm8ZXSWDb&ved=0ahUKEwjR1JOCjf-PAxUXUWcHHUg9IXEQ4dUDCCE&uact=5&oq=adjustable+fuel+pressure+regulator+nissan+fuel+rail+adapter&gs_lp=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_EFhqEHecdnjv2SBwYyLjU1LjGgB7XnArIHBjAuNTUuMbgH4UXCBwgwLjUuNTEuMsgHiQI&sclient=gws-wiz
×
×
  • Create New...