Jump to content
SAU Community

Recommended Posts

well dropped off my car to hypertune for some changes and here r some b4 and after shots!!!

they f*kd it up alright haha im rapped :D its finally done!!

from this

r32gtr_003.jpg

to this!

16102007178.jpg

another pic

16102007179.jpg

gonna see how much power i can make b4 fitting some gas :( should see some track time once my cage gets made and a few other little bits n pieces i have yet to finish on it.

Link to comment
https://www.sau.com.au/forums/topic/189514-hypertune-fkd-up-my-car/
Share on other sites

very nice 26. how much did it set you back? i think everyone wants to see a breakdown of your expenditure! i know i do!

its my goal in life to own a godzilla of similar stature. but id paint it yellow, and replace the wing with an a/m. the stock wing is awful!

hahah lets not go into cost, but a minor breakdown, the engine bay still needs a hand polish :D hasnt been done yet

2.7 jun stroker, t88 38gk turbo kit, 19" racing harts, 6" trust cooler thanks to CRD

5 spd ppg synchro box and heaps and heaps of little parts thanks to ian at hi octane

full custom suede interior with bride inserts etc thanks to custom trim works/doran

hypertune did the following for me,

tidy up all engine wiring

plenum, throttle body, intake, water breather setup, catch tank etc etc heaps of fabricating parts!!

i believe its one of the best in aus, may be biased, but thats wat i honestly think!

oh and my carbon bonnet and boot with n1 lip are coming, and n1 3 piece skirts with carbon pods. all on there way

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...