Jump to content
SAU Community

Recommended Posts

 I never use car like this before . How can i make sure everything is ok. There is a rattle noise coming middle of the car i think old owner scract the exhaust pipe . and is there any mechanic for this cars in perth, Also when i change the gear up after push the clutch revs does not going down im not sure it is problem ( im so sorry about my English)

@colin.ssc

Edited by SELSv36
tag
Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7910168
Share on other sites

On 07/07/2019 at 1:32 AM, SELSv36 said:

 I never use car like this before . How can i make sure everything is ok. There is a rattle noise coming middle of the car i think old owner scract the exhaust pipe . and is there any mechanic for this cars in perth, Also when i change the gear up after push the clutch revs does not going down im not sure it is problem ( im so sorry about my English)

@colin.ssc

Try KYP in Welshpool. 

Rattle from middle of car could either be cats or exhaust pipes, heat shields or like mine, something in my car is making the rattle. Should be something under the passenger seat. I have not taken the seat out yet to have a look.

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7910392
Share on other sites

  • 5 months later...

I just bought a 2007 370GT S from a mate here in Adelaide. I'm retired so I reckon I will lift the average age of members but you're never too old to learn they say and that's what I'm here to do. This forum has already yielded a mine of information which enabled me to make an educated buying decision. Even though it is 40c+ I can't stop myself going out to the carport to admire the Skyline's curves. Phwoar!

79325630_530015214216795_1823661208578818048_n1.jpg

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7921496
Share on other sites

Hey guys. 

Long time member, occasionally paid when I was in Qld with my R33. I have just bought a fairly decent condition '03 350gt. Looking forward to getting back in to the Skyline world and once again owning something that is fun to drive and I don't just hand over to my local mechanic every 10,000km. I pick it up tomorrow. 

 

Screenshot_20191222-205439_Carsales.jpg

Screenshot_20191222-205429_Carsales.jpg

Screenshot_20191222-205423_Carsales.jpg

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7921737
Share on other sites

  • 3 weeks later...

Hi, newbie here, purchased this v36 a couple of weeks ago, happy so far, fully loaded with sunroof and leather and cruise control. Had English conversion stereo fitted last week which really makes the car, big brakes and 20" wheels. Edit coilovers as well 

 

IMG_20200109_051821.jpg

IMG_20191231_170625.jpg

Edited by Jamest5r
Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7922701
Share on other sites

  • 1 year later...
  • 6 months later...

Hi all. I recently bought a 2008 nissan skyline 370gt S. I need a couple of things done. Can anyone help. 
-new steering wheel with cruise control

-GTR style halo tail lights 

- Skyline emblem

- Demon style day time headlights; preferably red

- Language translation to English

I am based in Geelong, Victoria. 
Any help is highly appreciated. 
Thanks

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7956686
Share on other sites

Google or ebay for your items.

There are is lots of info about the language conversion in this forum. But some Audio shop or import shop in Victoria should be able to help.

Some forum members would have all the info you need but they might not come online for weeks or months or ever :( 

 

  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7956718
Share on other sites

  • 3 months later...

Hi Everyone,

 

I have a newly acquired 2004 V35 as a daily driver which I acquired from my son as he is now on the path of home ownership. I must say I really enjoy driving this car. I have upgraded the brakes and replaced front suspension bushes and ball joints which have improved the driving. The BOSE radio has failed but I was able to turn it off so the A/C controls are working. If anyone has some advice to offer on the merits of Aepro and Metra double din facia replacements and a good head unit that gives me handsfree phone SIRI and and Apple Car play I would be pleased to benefit from their experience.

Other than that I will be interested in hearing other peoples experiences and learning from them on how to maintain my V35 in tip top order

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7960608
Share on other sites

Welcome.  I think the general consensuses of the metra/aeopro double din fascia is to avoid !!.. they are cheaply made and cause issues.  However, the genuine double din fascias are expensive and hard to come buy.  If you do find one, make sure you are aware the Series1 ( up to 2004) fascia is quite different to the series2/3 (late 04 onwards).

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7960625
Share on other sites

  • 9 months later...

Hi 

I was looking at buying a 2004 Nissan skyline 350gt V35 Auto with 115,000km

Supposedly imported back in 2013 by a small import business there’s only been 1 owner 

also would I have to get engine parts from Japan or can you use all parts from the 350z 

 

Thanks 

Ps This Forum rocks 

 

 

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7972635
Share on other sites

On 11/19/2022 at 1:40 PM, Jack151 said:

Hi 

I was looking at buying a 2004 Nissan skyline 350gt V35 Auto with 115,000km

Supposedly imported back in 2013 by a small import business there’s only been 1 owner 

also would I have to get engine parts from Japan or can you use all parts from the 350z 

 

Thanks 

Ps This Forum rocks 

 

 

Yes you can use parts from the 350z but not all parts. Servicing is no different to any other car. The engine is very common.  

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7972711
Share on other sites

On 11/19/2022 at 4:40 PM, Jack151 said:

Hi 

I was looking at buying a 2004 Nissan skyline 350gt V35 Auto with 115,000km

Supposedly imported back in 2013 by a small import business there’s only been 1 owner 

also would I have to get engine parts from Japan or can you use all parts from the 350z 

 

Thanks 

Ps This Forum rocks

I owned a 350GT 2003 model for about 8 years (changed Jan 2022). In that time I remember the following maintenance/issues/repairs, and where I sourced the parts:

  • Ignition coils. The first I got directly from the mechanic no probs. Nissan. The others I went on eBay and got NDK
  • Brake Rotors and Pads. No issue. I changed the pad material because the rims were heavily coated in dust. The new ones had virtually no dust, but the squealed like a banshee when cold.
  • Electric Window winders, both sides. Randomly played up (lightly smacked the side of the door to get them  temporarily working), stopped working all art once. I took them out, pulled them to pieces, cleaned them inside (especially around the carbon brushes & springs and the spindle spike), applied an electrical conductive grease (from JayCar), put them together, and remounted them. They worked perfectly after that. I think i got at least 5 more years till I disposed of the car. 
  • Tires. Obviously not an issue...
  • Rims. No issue, but I damaged my previous ones (aftermarket, from Japan when I bought the car)
  • Oil & filters
  • Air filters
  • And really minor things such as window wiper blades.

Thats all I remember. Nothing major, until someone drove "through" the car in a multistory parking garage; and drove off. Apart from a "Good Samaritan" leaving a note on my windscreen with the offenders numberplate, an attendant following them in re-parking on a different level (with lic. Plate), my car was parked right next to the automated pay machine, so it had numerous cameras on it. He / She was fined by the police for their attempted get-away. The reason I tell this story, I had insurance do the repairs. They made 5-10 crappy attempts, and on one of the last failed attempts, I pointed out that at the correct angle, the bumper had waves/light reflection distortions on the surface (long straight florescent tube had a circular reflection). After some arguing, they agreed to correct it. Later, the assessor told me he found "the single last new bumper" in Australia. Which I thought was weird for a car never sold in Aus. ie there were  *possibly* new body panels in Aus,. And why would he continue looking if he found one? insurance pays, not the repairer They eventually gave up and paid me out. After screwing me around for almost a year.

Generally speaking, I never had issues with parts/repairs. Its a Nissan, and they try and re-use parts between what they sell, inc locally.

Edited by Vee37
  • Like 1
  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7972800
Share on other sites

1 hour ago, Vee37 said:

I owned a 350GT 2003 model for about 8 years (changed Jan 2022). In that time I remember the following maintenance/issues/repairs, and where I sourced the parts:

  • Ignition coils. The first I got directly from the mechanic no probs. Nissan. The others I went on eBay and got NDK
  • Brake Rotors and Pads. No issue. I changed the pad material because the rims were heavily coated in dust. The new ones had virtually no dust, but the squealed like a banshee when cold.
  • Electric Window winders, both sides. Randomly played up (lightly smacked the side of the door to get them  temporarily working), stopped working all art once. I took them out, pulled them to pieces, cleaned them inside (especially around the carbon brushes & springs and the spindle spike), applied an electrical conductive grease (from JayCar), put them together, and remounted them. They worked perfectly after that. I think i got at least 5 more years till I disposed of the car. 
  • Tires. Obviously not an issue...
  • Rims. No issue, but I damaged my previous ones (aftermarket, from Japan when I bought the car)
  • Oil & filters
  • Air filters
  • And really minor things such as window wiper blades.

Thats all I remember. Nothing major, until someone drove "through" the car in a multistory parking garage; and drove off. Apart from a "Good Samaritan" leaving a note on my windscreen with the offenders numberplate, an attendant following them in re-parking on a different level (with lic. Plate), my car was parked right next to the automated pay machine, so it had numerous cameras on it. He / She was fined by the police for their attempted get-away. The reason I tell this story, I had insurance do the repairs. They made 5-10 crappy attempts, and on one of the last failed attempts, I pointed out that at the correct angle, the bumper had waves/light reflection distortions on the surface (long straight florescent tube had a circular reflection). After some arguing, they agreed to correct it. Later, the assessor told me he found "the single last new bumper" in Australia. Which I thought was weird for a car never sold in Aus. ie there were  *possibly* new body panels in Aus,. And why would he continue looking if he found one? insurance pays, not the repairer They eventually gave up and paid me out. After screwing me around for almost a year.

Generally speaking, I never had issues with parts/repairs. Its a Nissan, and they try and re-use parts between what they sell, inc locally.

thank you so much this is so helpful 

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7972802
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...