Jump to content
SAU Community

Recommended Posts

Saw two R34's on the way to work on Cav Rd at 12:30. A midnight purple R34 GTT Coupe. The guy flashed his lights at me and I waved. The other one was on the SE freeway going to the city, the other car was on its way out. Couldnt see the plates.

No-one was hurt, theres no damage to my car (or any more then there already was :P) I have a court appearance next month on the charges of racing a 180sx, but I swear I was just accelerating really fast :D

Here, you'll need this...

kyjelly.jpg

Spotted a YELLOW R33 series 2 at Hardley Normal Aspley thursday night...parked of course Plate ???84. I was in the Fasta Pasta having dinner as I did not want to go via Aspley as I am now back to the line the only car...too many tools racing on Gympie Road...

Spotted a YELLOW R33 series 2 at Hardley Normal Aspley thursday night...parked of course Plate ???84. I was in the Fasta Pasta having dinner as I did not want to go via Aspley as I am now back to the line the only car...too many tools racing on Gympie Road...

Yeah thats me.... Plate "COL-082"

Looks good now hey.... Had a full 3 hour detail yesterday.... FREE

spotted another R33 silver type M near gardencity around 1ish waved owner didnt wave bk .. another was a R32 GTS-T with rego Plates 41 GTR lol that car with those plates where the funniest thing ive been.. young chick driving as well,... stock as rock... another was a a carbon copy of my car 987??? along logan road at 3ish..

spoted a gunmetal 32 gtr on thursday night, followed me outta yatala bp and headed north with me for a while, no personalised plates

seen a gunmetal 33 heading south at least twice now, looks to have a gtr style wing and bbs look wheels.

seen a silver 33 series 2 i think, on the way out to a job site at tamborine at least twice now, he gives me a wave back when i pass him.

There are a few skylines and sylvias getting around up here

I have seen:

white r33 gtr (autobahn owner)

r34 gtr v spec about a month ago parked at the overlander carpark next to a brand spanking wrx

White r33 gts-t with carbon fibre bonnet (blokes name is whitey I think)

silver gts non turbo (dale?? met him nice bloke should look good when he gets the front bar painted)

white 180sx lives beside the first and last takeaway shop

Red gtir pulsar at the church near the sunset IGA

There are many others but I cannot remember

anyone from The Isa ???? come forth.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...