Jump to content
SAU Community

Recommended Posts

lol

Would have kept going had I not said okay this is shit. Wearing jeans in a car was uncomfortable as fk and I found it hard to sit / would get stomach pains sometimes. Don't know how overweight people do it.

genetics absolutely play a part in the overall scheme of things. Birds you are very narrow minded when it comes to this and your stand alone opinion does not mean you are right!

a true ecto while infact have completely different muscle fibres to that of a mix or meso/endo. This infact determines how hard/easy it is to build muscle and strength

given the above it is absolutely true that an ecto can become a body builder and become a massive kent, however this is going to include far more focus on dietry and routine plus dedication more than the others (not saying the others dont either)

in saying that if they are completely lazy or do not infact work on the diet and what not then i would agree that "blaming genetics" is an excuse for the fact that they are not dedicated in the goal at hand

exactly, there are base body shapes. - does not mean they can not be changed, whether it be muscle of fat.

At 6'3 and 80kg, do you think you're not an ecto shape anymore birds? albeit a muscley one?

tumblr_mbw63cAIZj1qfcjqvo1_500.jpg

Just put in my first BN order, prices are good :)

I got creatin, wpi, wpc and some casein. Also started eating a lot of rolled oats, eggs and chicken breast

See what happens I'm 72 kg ATM was nearly 79 in October last year before I could start my rehab from back surgery. Had been sitting on 75 for a fair while

i'd say that's just differences in muscle insertions and bodyfat %

btw I could fit into GT-R seats fine at 110kg, 5"11? you guys must have wide hips lol

This. Have also not seen anyone look like the first body shape and rarely look like the last body shape. Aside from them holding different poses lol, first person appears not to do much lat work, and third is the only one who does shrugs/upright rows? I am confused. Am I an ecto if I don't do pull-ups and deadlifts?

Most people who train proportionately, end up with a variation in muscle size and body fat of the middle one.

that's with my arse planted firmly into the bottom of the seat - not sitting on top of it, or slouched down into it - the mrs on the other hand had to sit slouched all the way down because her hips could barely fit between door and centre console lol

I could sit myself into a Bride fixed back seat with a bit of a squeeze, I've yet to see a woman do that!

At 6'3 and 91kg, do you think I was still an ecto?

What about 100kg and beyond if I kept going with my bulking diet?

you self admitted that you were a lot fatter at 91, so of course you'd look different.

We're talking about base body shapes, as said, any shape can be changed.

and you dont think different muscle insertions and bone lengths attribute to these body shapes?

Boz fitting in seats Dan did not, at a heavier weight, does that suggest that body shapes are different? or just that they like seat feel different?

I think it's just a different definition of "fit", at 93kg, though I had a huge J-Lo ass.

My Silvia seat however, only a chosen few can fit into it. A lot narrower than a Bride.

post-23873-0-37051800-1392265474_thumb.jpg

Edited by ActionDan

So what exactly is your point then, jangles, given my whole argument is that pre-lifting body shapes can be easily changed and people attribute too much of their failure / others success towards it?

Boz fitting in seats Dan did not, at a heavier weight, does that suggest that body shapes are different? or just that they like seat feel different?

It doesn't suggest anything specific at all. Besides being incredibly subjective measures: people have different bone structures and heights; 20+ year old car seats have different shapes; fat distribution is not proportionate; neither of them stated their weights, only that they were subjectively fat on self reflection. Insert a hundred more variables here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...