Jump to content
SAU Community

Recommended Posts

:thumbsup:

Though I'm kind of curious how rounded is "rounded" to boz. I have people come up to me between my heavy sets and tell me that I'm rounding my back, going to hurt my back etc. Never had an injury from deadlifting yet (it's actually fixed injuries for me) and almost everyone who says this stuff to me isn't lifting anything noteworthy with their deadlifts...methinks they play it a bit safe sometimes and are afraid to push their limits to get stronger.

If you are lifting at your true maximum weight for the exercise, your back will never stay straight during the lift...it's just the way the back lifts at maximum exertion. But as said before, there's a difference between rounding for max weight and rounding because you have terrible technique from the get go.

It depends on what part of your back is rounding. Nearly everyone will round through the middle/upper back, which is fine (just makes it hard to lock out). Rounding in the lower back can cause problems but I've seen people pull heavy weights that way and never hurt themselves. I wouldn't teach it that way though.

That's it, look at some of the strongest deadlifters in the world and many of them round, whilst others stay fairly straight. What works for one may not work for someone else; all about how you've trained your back to lift I say. Million ways to deadlift!

That's fair enough then. I wouldn't want my back arched too much for lower weight volume stuff...some serious strength and form issues if you can't stay rigid on the light weights.

many of the PTC deadlift videos I've seen have upper back rounding to some degree - the peanut gallery on YouTube is always quick to point this out too :D

Yeah there's one of Martin lifting 250kg for 6 reps or something ridiculous like that...63% likes because he rounds his back in it. I'm sure all the dislikers could show him how to lift more...

From the very limited understanding i have. From what i can tell, Controlled rounding (actually contraction) upper thorasic spine is fine, actually good lever if significant strength is there.lower back stability is required. Zero movement . Lower back movement takes away hip drive and puts it under stress likely to farquar the posterior chain somewhere. If the weight is heavy enough. Including sciatic or piriformis in addition to spine hurt risk.

Hence my response to Tolga regarding my 180kg lift on Christmas lol. Felt perfectly fine to me, that's all I care.

I dont think your lift on christmas and rounding of back go together.

I personally would put it in the category that Boz is talking about, 1rm, pb or not.

but, like you said, you're happy, so thats all that matters...

has anyone had a car that was running really really well.. like the best it's ever run... right up to the point where it f**ks up..

and the conversations always go along the lines of... "yeah man.. it was running the best it ever did and then this happened"

Just saying...

If you are doing it in a dangerous way, it's only a matter of time.

Just because KK deadlifts with a rounded back, doesn't mean that you can too.

Troy you should go back and watch your vid.

you basically straightened your legs out before the weight started leaving the floor, then you did a stiff legged deadlift in sumo stance to bring it up.

Just my opinion man.

You know your body better and can decide for yourself.

Not saying I won't ever get a deadlift injury, but as a back rounder I've failed a lift before and not injured myself. Have also held the thing above my knees for 15 seconds (very rarely) and hitch the prick up until lockout. It's not good form, but once you surpass that weight and it becomes light, you end up with decent form. Hopefully the day doesn't come when I'm wrong about my gut feelings.

I really think it has a lot to do with the way you train your back to lift from the get go. If you are used to lifting only rigid, then going heavy with a rounded back thrown in will see you in trouble; not unlike a hyper extension for someone who doesn't have the flexibility to pull off a movement. If, on the other hand, you have always raised the bar (!) by rounding with heavy weights, I think you are in a much better condition to pull off that style of deadlift.

has anyone had a car that was running really really well.. like the best it's ever run... right up to the point where it f**ks up..

and the conversations always go along the lines of... "yeah man.. it was running the best it ever did and then this happened"

Just saying...

If you are doing it in a dangerous way, it's only a matter of time.

Just because KK deadlifts with a rounded back, doesn't mean that you can too.

Troy you should go back and watch your vid.

you basically straightened your legs out before the weight started leaving the floor, then you did a stiff legged deadlift in sumo stance to bring it up.

Just my opinion man.

You know your body better and can decide for yourself.

Agreed.

The lifters that have been referenced still complete a 'competition' lift, not something so far removed it shouldn't be carried out.

I think Markos says something along the lines of, 'Leave your ego at the door' when going to PTC.

You're only cheating yourself.

Also find this quote from you quite funny/ironic

Agreed.

Not saying I won't ever get a deadlift injury, but as a back rounder I've failed a lift before and not injured myself. Have also held the thing above my knees for 15 seconds (very rarely) and hitch the prick up until lockout. It's not good form, but once you surpass that weight and it becomes light, you end up with decent form. Hopefully the day doesn't come when I'm wrong about my gut feelings.

I really think it has a lot to do with the way you train your back to lift from the get go. If you are used to lifting only rigid, then going heavy with a rounded back thrown in will see you in trouble; not unlike a hyper extension for someone who doesn't have the flexibility to pull off a movement. If, on the other hand, you have always raised the bar (!) by rounding with heavy weights, I think you are in a much better condition to pull off that style of deadlift.

All this means imo is that you aren't ready for that weight yet. You've over come a mental barrier because you feel better for 'lifting that weight' 'getting that number' but if you waited a consistent couple of weeks, it would of became an 'easy' clean movement acceptable to the true form. Submaximal training is a powerful thing.

I agree with the second part somewhat

A rounded back that is induced from heavy weight is somewhat a buffer if they are still tight, if you're rounded and then lift with the same amount of breakdown, where does the spine go?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...