Jump to content
SAU Community

Recommended Posts

Im looking at taking my car out to the track. right now i am performing the neccessary upgrades to ensure i can race.

I saw that i need to have a secondary bonnet restraint. What do you guys use?

I have a standard bonnet and i think i will look like a wanker if i put bonnet pins on it. Anyone got other suggestions?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/201649-secondary-bonnet-restraints/
Share on other sites

Im looking at taking my car out to the track. right now i am performing the neccessary upgrades to ensure i can race.

I saw that i need to have a secondary bonnet restraint. What do you guys use?

I have a standard bonnet and i think i will look like a wanker if i put bonnet pins on it. Anyone got other suggestions?

Cheers

Does it state that its needed for a stock bonnet?

The OEM latch is unlikely to fail, and if it does, the safety catch is also unlikely to fail.. if you see it quick enough.

I wouldnt be worried about a secondary catch for an OEM bonnet. Unless it clearly states it IS required for an OEM bonnet too.

Iv been track racing for years, and the only people i know with pins are those with CF bonnets where the catch isnt bolted to anything structural, IE the fiberglass skeleton.

Also, out of the many many many days i have been to i have NEVER ever seen a bonnet come unlatched or fly open.

The odd muffler fall out the ass, fuel tank straps coming off and blown motors/boxes, even an engine mount bolt working loose and flying out under the car... :D but never a bonnet!

Edited by gotRICE?

I've seen many carbon fibre bonnets come off actually. It's really hilarious to watch (not for the owner of the car though).

They often smash backwards and smash the roof and the windscreen. Sometimes they crack badly and bits of the bonnet flies off.

Most of the track days ive scrutineered, a secondary bonnet restraint is necessary. Lots of people hook an old belt from the bonnet frame and clip it down through the bumper or so. Another way is with a small chain and a shackle/caribbina and hook it onto the radiator support.

basically it depends on the Supplementary regulations for the event you are entering. If the Supp regs dont say anything you don't need a secondary restraint unless it is full on racing (schedule C requires secondary restraints for non road regstered cars)

Most events dont need a secondary restraint for modern cars

1 question though,

With using a belt or the clips etc, what if theres a fire under the bonnet?

Be a bit hard to get them undone in time?

mind you though if there is a fire Id be out quick smart! but if a small,little fire started?

Despite the dual catch system std on modern cars the track days we do with the WRX club here in Vic state you need one. There are lots of ways you can do this.....bonnent pins are fine with a std bonnent, others use a belt strap fitted to a suitable spot and I use a wire cable attached to the frame of my bonnent which hooks to the radiator support.

  • 5 months later...

my advice is buy one of these babies. http://www.initialdrift.com.au/forums/view...074&start=0

cost about $25 and make sure you ask for it to be sheathed with the rubber heatshrink (stops it scratching up stuff). easy to fit, just need to drill a hole.

now that I've bought mine I just keep it in my helmet bag with licence and helmet etc so that I never forget to take it to a track day/sprint/whatever.

I'm surprised you need a secondary restraint for a skyline, its certainly not required in the CAMS regs (late model cars don't need an additional restraint). Unless it is requried by the supplementary regulations, I haven't seen them

Yeah some events now are starting to require them now even for late model cars. Up till now later model cars with an un-modified 2 stage factory catch have been ok, but for some reason of late it seems they are moving towards making all cars use a secondary restraint. Even a recent drift day I attended required all cars to have one and that is classed as a non-speed event!

Still for $25 and 5 mins drilling a hole it's not too onerous. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...