Jump to content
SAU Community

Recommended Posts

The boys changed the transfer case on saturday in the hope of getting some front drive. Didn't help much, the best they could get was 10% or so directed to the front. That's why you see pics of it black-tracking everywhere.

Aha.. That makes sense. It certainly looked like it was having traction issues!

  • Replies 569
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yeah, there is something not quite right with awd. not exactly sure what but it's not getting enough front drive. we changed transfer case on saturday and it was a little better in the morning, but not much. mark reckons possibly a sensor failure or awd ecu not receiving an input (like TPS) as it's getting some pressure but not enough, which means it's baking the transfer case which means it gets worse and worse. on top of that they have a fair bit more torque than before and trying to put that power down on 265 semis is not easy, hell even some of the evos which are much lighter and with less toque run 285s!

the car went so well for it's first outing. nothing broke and apart from the little awd issue it ran absolutely perfectly. a credit to mark and russ for their hard work and all the other guys who worked on it too. mark drove the absolute wheels off the thing too and watching the in-car last night just goes to show he must have a giant set a it looks scary to drive. scary fun that is.... :banana: i'm sure russ will post some when he gets home, but i'd say the car is wheel spinning about 3/4s of the time! It's sideways from turn 5 all the way up the hill and onto the bridge through 3rd and 4th. then sideways off the bridge all the way to the S.

and yes cnj tune it.

We had the same or similar problem when we were running the Autronic ECU...it needs a voltage divider buffer circuit fitted to allow the attessa to share the same signal as the TPS without pulling it (the voltage level) down under load. The Vi-PEC had an issue too but was a much less complicated fix.

Hi Guys

well back from superlap,

and all is good, car is still in one piece and running great!

obviously have alot of things to sort through and keep building the car as it wasnt really finished ( but are they ever).

we need to get the 4wd drive sorted asap!! thanks for the advice paul will be looking at pressures and codes etc pronto. then off to get swaybars made as nopne were on the car for superlap, and

bump steer arms for the front end. then different diff ratios wilkl be changed as we couldnt use the torque to full advantage as we had too shorter ratios top speed was 250 down the front straight on the limiter before the start finish line!! ( we kept raising the limiter but far from ideal)

thanks for the comments

cheers russ'

here is some incar

Awesome incar Russ, just loving the power on oversteer :down:

The box is a Holinger?

Mustve felt good passing your old R32

it's a stock box, but with an ebay short shifter for quicker shifts. works well. :bunny:

seems as though you have the Tomei 1 gear set. had a look at ratios today and your ratios are quite close compared to mine which are the -15 gear set.

Still have some setting up to do, comes on boost nicely.

Keep up the good work Russ and crew.

All the best, and always keep in the loop with the development advancements. Good learning experience for us non circuit boys...

Hey Guys

We shot Marks car over the weekend and the feature, along with Superlap will be coming out in Motive DVD volume 2 which is due on shelf in June.

Motive DVD Volume 1 is based on the Red BUll Drifting World Championship and will be out start of May.

Heres the link:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...