Jump to content
SAU Community

Recommended Posts

Tonight I got out of my car to post a letter. The street was quiet, so I left the motor running. As I got out of the car something beeped a couple of times. I assumed it was the car reminding me I had the door open, the engine running and the lights on. Then when I got back to the car, the doors were locked. The remote and key were inside, the radio was working, the headlights were on etc, and I was locked outside. I rang my wife and she brought the spare remote. It didn't unlock the door. She went home again and brought back the spare key. I was able to get back in. All up, it was idling by the side of the road for nearly an hour.

I have a 3 point Flashpoint alarm.

Does anyone have any idea why the door locked, and why the spare remote wouldn't unlock the door?

Tonight I got out of my car to post a letter. The street was quiet, so I left the motor running. As I got out of the car something beeped a couple of times. I assumed it was the car reminding me I had the door open, the engine running and the lights on. Then when I got back to the car, the doors were locked. The remote and key were inside, the radio was working, the headlights were on etc, and I was locked outside. I rang my wife and she brought the spare remote. It didn't unlock the door. She went home again and brought back the spare key. I was able to get back in. All up, it was idling by the side of the road for nearly an hour.

I have a 3 point Flashpoint alarm.

Does anyone have any idea why the door locked, and why the spare remote wouldn't unlock the door?

lol that's ridiculous

feel sorry for u

some alarms have auto arming which is the stupidest thing i ever heard

and others have anti hijack.

no idea maybe read through the manual?

I've tried to replicate it, but can't.

It's not an anti-hijack option, and the door does not lock when I turn off the ignition - even if I wait for a couple of minutes. It does arm the alarm though.

The beeps I heard were the normal warning you get when you leave the headlights on and turn the ignition off - but I had the ignition on. The car was still running, and the turbo timer wasn't enabled.

The company that installed it, and the company who supplied it both had no idea why it would have happened.

I guess I'll just have to put it down to bad luck, or strong magnetic fields, or aliens or something. Damn aliens.

this is a bit off topic ... but

I heard that if u do happen to lock ur keys in ur car... u can unlock the doors using the spares and not even having to return home...

apparently if u call home and you put ur mobile phone near your car and have the person at home press the remote on your spare key the signal will transfer thru the phone and unlock you car!

I havent tried this so dont quote me on it. Seems a bit farfetched... i guess the best way to find out is to try it!

nup! the bandwidth of the audio portion of the transmission is 300-3khz now most of the remotes I know have a 433mhz carrier with data bursts on that. not likely. only remote way it could even possibly work is off of teh harmonics the phone generates on transmission..

hehe, its an option in the alarm, have a look through the manual and you should find it

my steelmate alarm used to engage the central when the brakes were pressed 15 secs after the car was on and would unlock when the ign was turned off, would beep n flash n shit when the door was open

this is why i sold that alarm! lol!

  • 4 months later...

this happened to me a couple months back. was at my bfs mothers house, decided that i didnt need to take my handbag etc inside, left it in the car.

had to get RAC to come out and open my car. $180 and an hour and a half later. got inside my car, to find my spare key in my bag!

the RAC guy who came out, told us of another r33 he went out to. girl was on the phone, had her head out theher window, window went up and locked her head in placed. wouldnt go up, or down!. lucky she was on the phone, got them to call RAC for her.

sure glad that wasnt me!! :blush:

its just a safety precurcion incase some1 opens ya door and hijacks your car lol like that ever happens

this almost happend to me! so it does actually happen lol. my passenger door auto locks when you go over about 30 kmh but not the drivers :P

This happened to someone i know...he tried to use his spare remote but still wouldnt work. Out of frustration, he held down the disarm button of the spare telling the car to un-f*ckin-lock and waving it about and stuff. Eventually, after around 15 seconds of holding the button down, it disarmed itself. It must have initiated some kind of system over ride, kind of like a fail safe mechanism i guess? So he was lucky! Total fluke!

apparently if u call home and you put ur mobile phone near your car and have the person at home press the remote on your spare key the signal will transfer thru the phone and unlock you car!

hahahahahahahahahaha

The door lock, is right beside the thing to open the door, I put money on you bumping it!

The other remote wouldn't have worked because the engine was running.

My car won't listen to the remotes after the motor is started either.

the RAC guy who came out, told us of another r33 he went out to. girl was on the phone, had her head out theher window, window went up and locked her head in placed. wouldnt go up, or down!. lucky she was on the phone, got them to call RAC for her.

This happened to my mate when i had the old VL, except he wasn't on the phone and he was drunk as. Was messing around putting his hand then his head in, got his head stuck and then couldn't reach the controls to put it down as the window controls were in the center console bit and was just out of reach. Was sitting there laughing my head off at him...... i eventually let him out haha :laughing-smiley-014:

hahahaha brendan your a lost case...... how can that possibly happen?????? a speaker doesnt transmit the same waves as a remote lol

oh well i had a good laugh anyway

my car locks itself when i turn the ignition on.. i once had the car running listening to music at a servo standing otuside the car.. a mate brought out a camera so i thought sick ill put the tinted windows up (which were down) i reach in the driver door and press auto up and as its about half way up i realise the car is still running, doors are locked, and ive just shut the windows..

lucky my mate was there to drive me home and get my spare key while the servo attendant watched my car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...