Jump to content
SAU Community

Recommended Posts

Not sure if it was there or not Talbo - my eyes hurt too much from looking at the Supra .... I even think the leatherette seat covers had been spray-painted - as the centres were metallic silver, and I have never seen material like it .... ewwwwwwwwwwwwwwwwwwwwwwww

Spotted two silver stags together this afternoon near the Bridgestone factory on south road, first one had gold rims, the second had 260rs plates.

Also spotted a girl driving a black 33 gtr near harvey norman on marion rd, had a vented bonnet and d wing.

seen that on magill rd tonight,recently sold by viva,lucky new owner..

Mate bought it, has some plans for it, I wont spoil his fun by divulging them here we will just have to wait and see...

Spotted a pinky/salmon coloured r34, with chromies and a bodykit similar to the one featured on the r34 in the Fast and the Furious 2 on Main South road about 8.30am.

Spotted PRIME 34, white r34 GT-T, wheels, bodykit, transformer sticker on the boot on Glen Osmond about 3.30pm

Haha saw that one yesterday too Andrew...., Is the 33 with commo spec rims still in that same yard?

Nah some poor bugger bought it, seen it twice this week around mawsonlakes in the morning bout 6am.

Spotted a two tone 33, plates JASVIN. in behind the Zoo. 32 sedan on hackney rd, pretty stock looking. Black Stagea at Glenside, Silver Stag at Bunnings Parafield just after 5pm. Blue 34 GTR behind Bunnings and Chris (zirtytwo) picking up the exhaust wrap. Yellow 34 on Elizabeth way around 7:30pm plates HSVEATR. A KE70 painted up like a AE86 panda pack too.

spotted a gay spec r33 in silver, with 20" pizza pan wheels in chrome and white wall tires at grand auto wreckers :verymad:

another r33 in silver, fresh to the wreckers if your boys need parts it had heaps.... not dented up to bad

black r33 with no wing on north rd at a car yard, looked like craigs old car ?

Spotted two silver stags together this afternoon near the Bridgestone factory on south road, first one had gold rims, the second had 260rs plates.

That would be myself and Cheffstag coming home from helping tangles finish of the new turbo install :verymad:

That would be myself and Cheffstag coming home from helping tangles finish of the new turbo install :)

did u also spot the north adelaide spec mum in her sugar daddys lexus rx330 on the fone, tail gating and beeping...wondering y i was going slow for her? any way :sick: lol....

spotted a white 35gtr on hutt st, cc plates... boosted it a bit for us, sounded very very nice

Not sure if it was there or not Talbo - my eyes hurt too much from looking at the Supra .... I even think the leatherette seat covers had been spray-painted - as the centres were metallic silver, and I have never seen material like it .... ewwwwwwwwwwwwwwwwwwwwwwww

haha yea i noticed it the other day... god its ugly. the Green 33 went about a week or so ago. i work really close to this car yard and see all the comings and goings.

keep seeing a black (?) R34 behind the gg village, looks nice.

haha yea i noticed it the other day... god its ugly. the Green 33 went about a week or so ago. i work really close to this car yard and see all the comings and goings.

IIRC they wanted like 20K for it too.....WTF!

Spotted a 32 gtr at ultratune at melrose park, had something similar to godzilla on its plates.

That would be myself and Cheffstag coming home from helping tangles finish of the new turbo install >_<

You were most probably on your way to his place, since you were heading south. It was just after 3pm.

stupidly dangerous, but still...

just spotted a GTiR pulsar throw an epic scando from my street into the lane opposite my place, was really well done... but yeah... stupid...

(but awesome to watch)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...