Jump to content
SAU Community

Recommended Posts

I like that second GTR you spotted :D

Cronic was more outta line than this fella with his tirade against Cara, but I let it go cause at the end of the day he made a good point.......spotting your own car constantly is pretty silly.

Cara, might be better to update your crash repairs in the Wasteland in future.

+1

Also, spotted a silver Stagea driving along Grand Junction Rd passing Addison Rd a little while ago this afternoon.

Spotted a white r33 behind me travelling from Ascot ave, down north east road and onto main north road... thought it was kellie for a while till I noticed the numberplates were standard SA plates... maybe she has an evil twin?

-D

Seen "C U BYE" parked along south road near Seaford the last couple of days.

Also this afternoon, spotted what i think was a black Soarer with 2 silver racing stripes down the centre of the car, and a spolier, was along south road at about 5:45, going through old noarlunga/seaford way. It also had some Japanese symbols on the boot lock cover...actually may not have been a Soarer at all, but it did have a TRD sticker on it.

Spotted which looked like Martin Donnon driving a grey 35 in the backstreets of Walkerville yesterday. Funnily, the V6 engine sounded with the exhaust like a commodore :)

That would have been Munro, Leo, given he lives in the back streets of Walkerville and owns a grey R35GTR :D .... but I have to disagree on the exhaust note - I think it sounds porn. Mind you in the back streets of Walkerville he would have been travelling at 40km/h or under, so you wouldn't have heard much at all. What are you doing back in Adelaide?

name='Dohmar' date='15 Sep 2009, 12:45 AM' post='4826214']

I dont think he was out of line, but he could have been more diplomatic about it. I blame him being a ranga for that

Well Dohmar. . . I was as diplomatic as I could be. . .

If I had Nightcrawlers email address, he would have got "Both Barrells". . .and deserved it - SAU Moderator or not.

He wrote what he wrote. . and knew he was wrong when he wrote it. . . Full Stop.

. . . but now it is time to move on and forget it . . . enjoy your rides guys. . and ladies.

I'm out of here. . .

Relax Graeme, I don't think Ben (Dohmar) was referring to you.......I'm pretty sure it was in reference to Cronic's post.

spotted nightcrawler (i think) at the carwash at gg. looked clean as =-)

Nah mate wasn't me .... did you think you spotted my R34 or V35? I was out in the 35 today :)

Spotted "vspc 34" at BP south road, at about 5.45pm FRIGGIN SEX right there... and a black 33 with starcorps next to it..ended up driving alongside it down south road..had P plates and Jazmac sticker on rear window.. sounded pretty good.

Silver Stagea with meshies at Hobby Habit this arvo.

and spotted my nitro r/c drift car sliding into many walls this arvo at Hobby Habit on Daws Road. Poor Chaser body..

you and brad got ya cars back on the rd yet???

Hey carl,

Yeah the cefy is off defect (thanks guys for ur support as well, when i needed to borrow parts :D )

Not sure about brad (gave him a msg through :) No reply... Pr!ck lol) ill find out if he is off though!

I was sooooo lucky i got off hey!

I don't think it was you then, there was a white 34 turning onto Wheatshiff Rd. I drive a 33.

Hmmm I was there at that time frame but didnt see a R33 or maybe I did...lol I see so many skylines down south and Im getting soooooo old... oldtimers must be setting in..hahahahah

Abe that is a Soarer,, I see it sometimes too. pretty thrashed looking when you get close to it

a silver stag in southgate plaza target parking lot , flooring it ,, all I could see was the roof line and heard it wizz past in the next lane

4x r32 near the same area, wine, white, black, silver with GTT wheels

I thought I spotted Penny (ontheranch) standing outside Coffee on Jacob in Gawler, but I dont think it was her. Then about 5 minutes later I spotted her R34 looking sweet as always.

Also a Greyish-Blueish R33 4 Door with silver meshies and a GTR Wing at Gawler Belt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...