Jump to content
SAU Community

Recommended Posts

For a sticky.............................

What we use;

4WD Transfer = Castrol Transmax Z

Automatic Transmission = Castrol Transmax Z

Manual Transmission = Castrol Syntrans 75W-85 or Castrol Syntrax 75W-90

Differential = Castrol SAF-XA

Cheers

Gary

Hi!

Differential = Castrol SAF-XA is only valid for a LS Differential, right?

Btw.

Here's the recommendation from BP for R33GTST:

Engine:

Visco 7000 0W-40 4.1 litres

Manual Transmission:

SHX-M75W-90 2.8 litres

Differential:

SHX-M75W-90 1.3 litres

For a sticky.............................

What we use;

4WD Transfer = Castrol Transmax Z

Automatic Transmission = Castrol Transmax Z

Manual Transmission = Castrol Syntrans 75W-85 or Castrol Syntrax 75W-90

Differential = Castrol SAF-XA

Cheers

Gary

Hi!

Differential = Castrol SAF-XA is only valid for a LS Differential, right?

Btw.

Here's the recommendation from BP for R33GTST:

Engine:

Visco 7000 0W-40 4.1 litres

Manual Transmission:

SHX-M75W-90 2.8 litres

Differential:

SHX-M75W-90 1.3 litres

I spoke to my mechanic about the rear diff anyway, I provided 75w-90 for the rear lsd, and he said when he was at nissan they put 140 in the rear lsds of aus delivered 32 GTRs (I don't know if he meant 80w140 or straight 140), thats when I brought up the service manual specifying 85w90 or was it 80w90, which then he brought up a valid point; the service manual is a literal translation from japanese to english not taking into account Australian conditions. Just food for thought.

140 is a bit heavy for a diff in a road sedan/sports vehicle...I tend to recommend this oil for the heavy duty four wheel drives or some racing applications.

Australia conditions are harsher and warmer but this usually relates more to the winter viscosity (start up) rating than the warmed up operating temperature rating.

did my box and diff this weekend (engine last weekend)

second was near impossible on the first shift on a winters morning, hence why i changed it.

upon draining, i only got 2.8L out of it, but it looked pretty clean.

decided to go penrite to see how it goes, i used sin 75 in the box, about 3.8 litres went in.

and limslip 90 in the diff, 1.4 came out (some funky purple color), 1.8 went back in.

and a bottle of nulon G90 between em.

second i beautiful now, even on an icy cold ass outback morning. :)

i bought a little hand pump from supercheap for 8bucks, but it wouldnt move the oil at all, so i made up a crude rig with garden hose, masking tape and a couple of stools. worked a treat (ive always done it this way on all my cars, just tryed the pump hoping it would make it easier and neater.......no, freakin mess cleaning up after realising it wasnt gonna do it

the box was really clean as it had a little tiny bit of threat tape on each plug, so i did the same when i put em back in

so far so good, i'll let yas know if i have any dramas with the penrite, but all seems good atm

post-62717-1249613145_thumb.jpg

post-62717-1249613266_thumb.jpg

post-62717-1249613340_thumb.jpg

  • 1 month later...
  • 2 weeks later...

I have similiar question to the above one.

I have just purchased a ER33 RB25 auto . . . and found to my supprise the oil on the dipstick was almost an inch above the high mark for a hot reading . . not good when I was checking it cold!!

Does anyone have any idea of ammounts and which oil to put in?

  • 2 weeks later...
  • 3 weeks later...
  • 4 weeks later...
Your comment about needing 1.5 litres got me to thinking as Duncan has suggested that the transfer case takes 2.0 litres. I looked in the workshop manual and it suggests 1.8 litres. For the record I put 2.0 litres in mine last night (I could not get the filler plug out and thought it would be just as good to pour in the exact quantity). I didn't notice any real problems today; but I guess the difference between 1.8 litres and 2.0 litres is relatively small!

For fluids the manual recommends

Transfer case (page CH-59) - 1.8 litres of Nissanmatic fluid D [approx. 1.8 litres]

Manual transmission (page CH-23) - Nissan gear oil MP-G special GL-4 #75-90 [approx 4.1 lites]

Front final drive (page CH-125) - Nissan gear oil hypoid GL-5 85W-90 [approx. 1.0 litre]

Rear final drive (page CH-125) - Nissan gear oil hypoid LSD GL-5 80W-90 [approx. 1.5 litres]

I have no personal opion as to the products and quantities; but I thought I would provide reference to the manual to round out the discussion.

Hey i'm running a R34 GTT and the guy at autobarn which sells motul tells me i only need 2.5litres for the manual transmission and 1.8 litres for the frond and rear diff..can anybody confirm this..because i dont want meself to run out on oil while i fill in and this is the only car i drive...and did anyone use the motul 90 PA differential oil..? how is it conparing to penrite LSD 90 and redline 75w-90 gear oil..??

cheers

mos

GTT doesn't have a front diff, unless you've done a 4WD conversion. The above quote is from the R32 GTR service manual, gearbox fluid capacity is very hit and miss, GTR boxes seem to take the full 4.1l, but non-GTR boxes can be anything from 2.x litres to 3.x litres

  • 1 month later...

hey im changing the trans (manual) and diff and probably transfer oil in my skyline... ive got a r34 gt4, so does that mean it has LSD diffs?

if it does, which i think it does, would castrol LSX90 go good in them?

  • 3 weeks later...
Mate, you were checking auto trans level with engine running, after going thru all gears werent you? a lot of people assume its like engine & should be checked turned off...

It was definately done with the engine running . . I had just driven 15k home . . thats what was so strange.

When I got under to find a drain plug I also couldnt find one???!!??

  • 1 month later...

just a quick question , has anyone used royal purple ATF man auto trans fluid in there autos

the only reasion why i am asking is becasue its same as transmax Z etc ............ so i was just wondering if anyone has used it before and thoughts on how it stood up

  • 4 weeks later...

hey guys,

so apparently castrol seems to be the way to go?

what temp does the diff tend to run at? the castrol site recommends their 80w140 diff oil if operating "consistently above 30oC". would this be ok in my stock gtt?

obviously im a noob, but im constantly amazed at how much there is to learn, eg: engine oil, diff and gearbox oil, spark plugs etc... lol

any advice is appreciated, thanks

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...