Jump to content
SAU Community

Recommended Posts

Just picked up a 32gtr, looking to do the engine, gearbox and diff oils pretty soon.

leaning towards smurfsblood for the gearbox (crunching into 5th also when shifting at speed), but not sure whether it is appropriate to run the same oil for the front/rear diffs.

Also is 10w40 semi synth ok for a rebuilt motor? oil will be changed every 7500kms and primarily street use.

  • 3 weeks later...
  • 2 months later...

Just noticed that redline recommends 80w140 for the rear diff and lightweight for the front diff. Anyone had any issues with this set up?

http://www.redlineoil.com.au/oil-finder-detail.asp?CategoryID=3642&ProductID=7592

80w140 just causes a bit of chattering when cold. That's about it. Been running it for 2 years with no issue at all.
  • 3 months later...

Been reading through all these pages and can't find a straight answer for my questions

I have a er34 awd manual

Gearbox oil-?

Transfer case-trasnmax z?

Rear diff oil-? Visious it think

Front diff oil-?

Attesa pump-trasnmax z?

Thank you to anyone that can clear things up

And! Just wondering if all my running gear and things are off a stagea? Might be able to find things easier.

Edited by BabyZ

Your gtfour is a 5 speed correct?

If it is not crunchy then put in a normal gb fluid as recommended in one of these pages.

Use lsd fluid for your rear diff (not needed for front but you might as well because it takes a bees dick worth of fluid)

Transmax z for remainder.

Just presume your car is a gtr then take advice from here.

I have read through this thread several times, and still end up confused on what product of oil i need to put in my GTR's rear/front diff's and transfer case...

Can somebody just tell me exactly what i need to buy from my local supercheap auto/auto barn/repco!

I did my Gearbox oil the other week, and used Castrol VMX-M. Seems all good to far, and shifts a bit smoother then the old oil that was in there!

Please. Somebody, just tell me what i need to buy......!

post-140263-14387447541883_thumb.jpg

Your gtfour is a 5 speed correct?

If it is not crunchy then put in a normal gb fluid as recommended in one of these pages.

Use lsd fluid for your rear diff (not needed for front but you might as well because it takes a bees dick worth of fluid)

Transmax z for remainder.

Just presume your car is a gtr then take advice from here.

Thanks, I have the transmix z. So that's the attesa and transfercase out of the way

(one shop in town had it)

And they recommend castrol axle EPX 80-90 for the front and rear? Haven't opened it yet because I feel sus about it. And also they said that I don't need to change the gearbox fluid..... So that makes me think they don't know. Just going off that fluids chat on the computer. And I don't really bother because the aren't and er34 gt-fours listed... Then he told me that my car is rwd.. But yeah, it is manual. Iv had it for 7 years. It's not crunching into gears, it's just getting hard to select reverse and 1st when cold. Think it could be all factory fluid. Because when I first got it I was the second owner in Oz the previous owner had it for a year, and when I first got it, it had a big ass blue oil filter with Japanese over it. Old dirty spark plugs.

Going off topic

  • 2 years later...
On 07/09/2017 at 8:21 PM, danny14 said:

Hey guys who uses redline trans oil and what's the difference between the syn trans Castrol

I use Redline MT90 because its an actual GL-4 spec lube instead of Castrol and most other brands which are GL-5. 

 

The Nissan boxes are supposed to use a GL-4 although most people use GL-5, which apparently isn't good for the brass synchro gears. 

I use Redline MT90 because its an actual GL-4 spec lube instead of Castrol and most other brands which are GL-5. 
 
The Nissan boxes are supposed to use a GL-4 although most people use GL-5, which apparently isn't good for the brass synchro gears. 

Ok cheers for that what about penrite pro gear oil
  • 1 month later...
  • 10 months later...
On 9/6/2018 at 12:21 PM, danny14 said:
On 10/21/2017 at 7:42 PM, Torques said:
I recently changed over to the OEM gearbox oil.
The gear changes were never as smooth before, I'm very happy with that oil and it's not expensive either.
 
 

You mean Nissan oem oil?

 

Hi there,

Yes, the standard Nissan gearbox oil ..

NISSAN MT-XZ GEAR OIL PASSENGER VEHICLES SAE 75W-80 KE91699932

https://www.ebay.co.uk/itm/GENUINE-NISSAN-MT-XZ-GEAR-OIL-PASSENGER-VEHICLES-KE91699932-1-LITRE/163151777634?epid=1315215982&hash=item25fc9a8f62:g:K-QAAOSwAldZ0lte

 

 

 

 
Hi there,
Yes, the standard Nissan gearbox oil ..
NISSAN MT-XZ GEAR OIL PASSENGER VEHICLES SAE 75W-80 KE91699932
https://www.ebay.co.uk/itm/GENUINE-NISSAN-MT-XZ-GEAR-OIL-PASSENGER-VEHICLES-KE91699932-1-LITRE/163151777634?epid=1315215982&hash=item25fc9a8f62:g:K-QAAOSwAldZ0lte
 
 
 
Ok cheers. I recently changed my box and out mt-90 redline in it I believe now that this may be the incorrect oil. Pushing 490kw through stock box also ahhhhhh
3 minutes ago, danny14 said:
10 minutes ago, Torques said:
 
Hi there,
Yes, the standard Nissan gearbox oil ..
NISSAN MT-XZ GEAR OIL PASSENGER VEHICLES SAE 75W-80 KE91699932
https://www.ebay.co.uk/itm/GENUINE-NISSAN-MT-XZ-GEAR-OIL-PASSENGER-VEHICLES-KE91699932-1-LITRE/163151777634?epid=1315215982&hash=item25fc9a8f62:g:K-QAAOSwAldZ0lte
 
 
 

Ok cheers. I recently changed my box and out mt-90 redline in it I believe now that this may be the incorrect oil. Pushing 490kw through stock box also ahhhhhh

No worries ... 490KW .... that will do :) Good man!

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...