Jump to content
SAU Community

Recommended Posts

brighton that big parking lot ended up down arthurs seat was perfect day for it

Yeah, i bet! did you see many police?

Every day when I'm along Nepean highway between Mordialloc and Elsternwick I see in one day probably 20-30 police, bikes, undercover's and etc. they are out in force.

nah was a couple cops @ arthurs seat but no troubles they had a cop at the bottom doin breatho's but only stopped 1 in 20 of us i rkn.. and an undercover was parked on one of the hairpins nobody got pulled over/defected etc that i know of...

saw heaps of cops heading back though down nepean and through clayton got a bit lost some of us haha

Spotted a grey r34gtt coming out of the RMIT multistorey carpark next to dracula's at about 3.40pm. =D

Gave a few toots of the horn but the driver didn't turn to look, must be because i'm driving a supra =(

:) FINALLY got spotted :P

but then again i always see you :)

anyway was in a rush, was more concerned about hitting my car on the ditch on the way out :X

:D FINALLY got spotted :)

but then again i always see you :/

anyway was in a rush, was more concerned about hitting my car on the ditch on the way out :X

That carpark is expensive, the ones just outside at 1.30/h, and around the middle point of every hour, some lots do free up, so time your arrival!

Someone carded me at Camberwell on sunday. Gunmetal 32 GTR was parked close by?

and

Spotted a white 33 GTST in the shithouse traffic on springvale road today. Driving next to me for a few km's

I was the R32 GTR in Safeway car park Sunday night. But carded? WTF?

Yeah man. Nice guy. He's local too. Lives in Beaumaris like me.

Yeah, when I met him, we actually spoke of you lol, he was saying one of his mate used to own a MR2 and is on SAU, and I'm like, I know that kid! lols

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...