Jump to content
SAU Community

Recommended Posts

flushing oil does thin down the oil though which does make it drain easier/better..I do it often but not always..and you dont need to put it in with different oil just put it in your engine with your old and run for 10 minutes before you drain

Undo sump plug, go have beer, cup-of-tea, have a chillax, change filter etc... Then do up plug and keep going.

Prolly would skip that step.

Some people swear by it, but it's not necessary if you're using decent oil and changing it regularly. Not all carbon deposits in the engine are the "devil", any deposits for example smoothing out imperfections in the cylinder lining will be removed, which will subtract from engine performance and longevity.

Agreed, but I think he's referring to flushing out the old oil using motor oil, not an engine flush/detergent.

why would an rb need an oil flush? there probably one of the cleanest engines you'll find in most cases..

if anyones interested , been using the royal purple now for 4000kms, no oil usage and still a nice brown tinge, good oil pressure too :thumbsup:

why would an rb need an oil flush? there probably one of the cleanest engines you'll find in most cases..

if anyones interested , been using the royal purple now for 4000kms, no oil usage and still a nice brown tinge, good oil pressure too :thumbsup:

My RP, in the same car, came out better looking than my sougi. Doing another change today. After this last bottle of sougi, Ill be giving motul 300v a try.

for what its worth - last change i let my rb25det drain for an hour - was barely dripping (1 drip from the drain hole evey 20-30 seconds) took the used oil bucket away - chucked another bucket underneath and left it for another 8 hours (went to sleep)checked the bucket in the morning, i was amazed, there was a considerable amount of oil that had still drained into the bucket.. at a guess id say 250ml .. its a bit overkill for 250ml or so..

What's your idea of "better"?

It wasn't as black and burnt looking and didn't smell as strong. They don't smell like burnt oil, just a very petrol smell in them but it was stronger in the sougi oil. Maybe its the difference between the viscosity of the oil?

Viscosity can be a factor, but Sougi is a detergent heavy oil and is commonly mistaken for having "burnt" or "broken down" due to the black appearance. The reality is closer to it having done something of a flush to your engine. I've seen the oil turn black after 1000km in a perfectly healthy engine...far from broken down. Of more concern to me, would be an oil that looks the same coming out as it did going in - after 5000km of high temperatures in a carbon heavy, high revving engine. This being said, Royal Purple is a very good oil, so I'm not at all saying anything to the contrary...it's just that misdiagnosis of oil condition is common when using rules of thumb such as colour or smell. Keeping in mind a burnt smell can be misleading too, when oil is a vessel for removing buildup and contaminants, which are the result of combustion - texture is probably much more important. All this being said, it is very unlikely for any oil to have broken down or burnt unless you have exposed it to severe operating conditions or maintained a service interval for too long.

Hai guise, probably will be changing my oil tomorrow :].

From reading various pages of this thread, I have come to believe Sougi is the way to go :O.

But M5000 is no longer made (neither is S6000 which seemed more than I need anyway?), so I'm thinking of using Syn-X 3000, 10w40? Car is R34 N/A btw. Would this be sweet?

Ty for any advice :cheers:

Viscosity can be a factor, but Sougi is a detergent heavy oil and is commonly mistaken for having "burnt" or "broken down" due to the black appearance. The reality is closer to it having done something of a flush to your engine. I've seen the oil turn black after 1000km in a perfectly healthy engine...far from broken down. Of more concern to me, would be an oil that looks the same coming out as it did going in - after 5000km of high temperatures in a carbon heavy, high revving engine. This being said, Royal Purple is a very good oil, so I'm not at all saying anything to the contrary...it's just that misdiagnosis of oil condition is common when using rules of thumb such as colour or smell. Keeping in mind a burnt smell can be misleading too, when oil is a vessel for removing buildup and contaminants, which are the result of combustion - texture is probably much more important. All this being said, it is very unlikely for any oil to have broken down or burnt unless you have exposed it to severe operating conditions or maintained a service interval for too long.

what do you mean by carbon heavy? with 5000km changes and premium oils and fuels why would there be much carbon in the engine?

what do you mean by carbon heavy? with 5000km changes and premium oils and fuels why would there be much carbon in the engine?

You should have seen my spark plugs after 300km. I was rich as f**k, this shit was snow flaking off. This lasted for about 800km so this could also have altered the colour of the oil coming out and he probably means that say per km of driving, an aging/modded RB will produce more carbon in comparison to other cars. Quite normal I believe for a modded engine running richer fuel mixtures. The more fuel you burn, the more carbon deposits there will be. I too wasn't saying sougi was a bad oil, but as you said, I misread the oil just going by the old bull you hear about the darker it is the more burnt it is. I feel good knowing that it is cleaning my engine.

Hai guise, probably will be changing my oil tomorrow :].

From reading various pages of this thread, I have come to believe Sougi is the way to go :O.

But M5000 is no longer made (neither is S6000 which seemed more than I need anyway?), so I'm thinking of using Syn-X 3000, 10w40? Car is R34 N/A btw. Would this be sweet?

Ty for any advice :cheers:

pm birds, he has some left i'm thinking.

i'll be grabbing another few bottles of his stock when my allowance comes in.

what do you mean by carbon heavy? with 5000km changes and premium oils and fuels why would there be much carbon in the engine?

All engines run rich, that carbon build up in various places, oil removes it. I think I've read a few times that rb engines are particularly carbon heavy, not sure if that's just the stock tune, or the stock tune's reaction to common mods, the engine design or all of those listed.

pm birds, he has some left i'm thinking.

i'll be grabbing another few bottles of his stock when my allowance comes in.

hmm yeah, perhaps for next time, though. keen to get it done tomorrow :P

my mate is insisting magnatec will be all good, but this thread seems to hate it XD.

as such, syn-x not too bad you reckon?

Edited by kaitoukid

Baha magnatec, worst thing I ever did to my skyline. Was going to put it in for 1000km just to give the engine a wash out with a cheaper oil, ended up taking it out after a few hundred because it sounded like ass and hated to rev.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...